The modern DSP technology used together with a 16 bit audio codec provides the user with high audio quality. Background noise is simultaneously minimised. This means that leaks which only produce a quiet sound can also be reliably identified. The Hydrolux is easy to carry even for longer periods of work due to the small housing and low weight. The large back-lit display provides easy reading of the measurement results. Hydrolux is simple to use which makes it a fine companion in your daily search for leaks.

With the modern series of Hydrolux equipment HL 500 H2 and HL 5000 H2, you can find leaks particularly quickly, easily and reliably. The equipment uses modern digital signal processing technology (DSP) to clearly recognise the leak sound, even when there is a lot of noise in the environment. The sounds are not just perceived audibly, but are also displayed graphically using ultra-modern dual segment analysis (DSA) technology. For the user this means more reliability when locating water losses.

Benefits:

Unique combination of ground microphone and tracer gas detector
Everything included in a set (control unit, ground microphone, H2 sensor)
Highest location precision due to visualisation of up to nine measuring points (gas concentration / sound)
Highest sensitivity for tracer gas detection

Features of the Hydrolux equipment:

Functions	HL 500 H2	HL 5000 H2
LCD Display	X	X
DSA technology	X	X
Histogram	X	X
Sound logger function	X	X
Software updates	X	X
Frequency analysis		X
Free filter setting		X
Line location mode		X

Standard accessories

Scope of Delivery (set)

- Leak location equipment / amplifier ?

- Headphones 4

- Equipment case 5

- Carrying belt 6

- Tripod adapter (PAM U-D) 7

- H2 sensor with rod

- Active universal microphone PAM B-2

with magnet and probe tip

Recommended options

Optional accessories

- Slide valve adapter 20 mm

- Slide valve adapter 42 mm

- Ground microphone

(PAM W-2) 2

- Connection lead VK 65 3

- Extension set for PAM B-2

and PAM T-3 sensor rods

- Carrying rod PAM W-1 / PAM W-2 8

- Carrying rod PAM T-3 9

- Tripod adapter PAM W-2-D

More products SEBAKMT

SEBA KMT PIL 8 PHASENLUX PHASE IDENTI?CATION IN EARTHED AND SHORT-CIRCUITED MEDIUM VOLTAGE CABLES

• Maintenance free transceiver clamps
• Suitable for any type of switch gear
• Requires only one person
• Easiest operation
• Absolute safe phase identification

SEBA T18/5 SURGE WAVE VOLTAGE GENERATOR FOR CABLE FAULT LOCATING

• Voltage Ranges : 0..3kV / 0..6kV / 0..12kV
• Energy : 1000 Joules

SEBA KMT HPG 50..110-H DC & AC HIGH VOLTAGE CABLE TESTING SETS

• HPG 50-H, AC testing up to 35 kVRMS / DC-testing up to 50 kV
• HPG 70 / 80-H, AC testing up to 50 / 58 kVRMS / DC-testing up to 70 / 80 kV
• HPG 110-H, AC testing up to 78 kVRMS / DC-testing up to 110 kV
• Suitable for AC-testing and DC-testing
• Compact, cast-resin high-voltage transformers
• Separate control and HV-units
• Voltage continuously adjustable
• Powerful system: 1,2 kVA continuous operation, up to 3 kVA 60 min. short-time operation

SEBA TELEFLEX-VX ADAPTER FOR SAFE OPERATION OF REFLECTOMETERS ON OVERHEAD LINES

• Very easy to operate
• Very good resolution, for both near and distant ranges
• Dangerous induction voltages reliably discharged
• Connection to a measurement system
• Test pulses up to 1,500 V for long distances
• For distances over 2,000 km

SEBAKMT HL7000 ELECTROACOUSTIC WATER LEAK DETECTION

• Completely wireless thanks to Bluetooth®
• Intuitive operation via touch color display
• Powerful lithium-ion batteries
• Integrated GPS receiver
• Ambient/noise cancellation
• Frequency analysis

SEBA KMT HPG 50..80-D DC & AC HIGH VOLTAGE CABLE TESTER

• HPG 50-D, AC testing up to 35 kVRMS/ DC testing up to 100 kV
• HPG 70 / 80-D, AC testing up to 50 / 58 kVRMS / DC testing up to 140 / 150 kV
• Suitable for AC testing and DC testing
• Compact, cast-resin high-voltage transformers
• Separate control and HV-units
• Voltage continuously adjustable
• Powerful system: 1,2 kVA continuous operation, up to 3 kVA 60 min. short-time operation

SEBA KMT HPG 70-K 70KV DC HIGH VOLTAGE HIPOT TESTER

• fully insulated test set for DC testing up to 70 kV
• Testing of cables, switchgear, current-transformers, MV plant/ component testing,
• Highest safety thanks to fully insulated design
• Compact and lightweight
• Separate control and HV-unit
• Voltage continuously adjustable
• Expandable with a VLF CR attachment for VLF testing on MV cables

SEBA SMART THUMP 16 CABLE FAULT LOCATION SYSTEM ON LOW AND MEDIUM VOLTAGE CABLES

• 1500J at 8 / 16 kV, 16 kV DC-HV proof test 23/46mA Burning
• Integrated ARM and ICE Prelocation
• Easy Go - automatic sequence to proof test, pre-locate & pinpoint
• Automatic interpretation of test results
• Sunlight readable, transflective 5.7" TFT colour display
• Safe OP Check protects user from incorrect or faulty lead connections
• USB interface for trace export via USB flash drive

SEBA KMT ESG NT PINPOINTING EARTH FAULT LOCATOR IN SHEATH OF UNDERGROUND CABLES

• high accuracy pinpointing of a sheath fault
• Automatic adaptation to voltage level
• Automatic filtration of interfering signals
• Automatic zero calibration, no adjustments necessary
• History mode
• High-contrast color display

SEBA TELEFLEX T3060 SINGLE-PHASE POWER CABLE REFLECTOMETER T 3060

• Range 8 km, 64 km (for ICE and Decay only)
• Fully equipped reflectometer with cursor, gain, and range adjustment
• High-contrast 5.7’’ TFT color display (640 x 480 pixel), with LED backlight
• Single-phase ARM input with ICE, Decay and Trigger
• AC or battery operated (up to 3 hours battery life)

Seba KMT Hydrolux HL 500 H2 Accoustic Water Leak Detector and Gas TracerOBSOLET PRODUCT ( * OUT OF USE )

Seba KMT Hydrolux HL 500 H2 Accoustic Water Leak Detector and Gas Tracer
OBSOLET PRODUCT ( * OUT OF USE )