SLS-50 can transmit digital encrypted signals through tested fiber to OPM-50 which can automatically identify input wavelength and switch to the corresponding test mode. This feature greatly reduces the workload at both ends and avoids potential error. User can select the working wavelength and SLS-50 will automatically toggle between working wavelengths.

Remote Reference Value Setting

SLS-50 can transmit digital-encrypted signal with power parameters through tested fiber to OPM-50 as reference for precise link loss measurement even the two units are far apart.

Compatible with FTTx

SLS-50 can generate highly stable signals at 1310nm, 1490nm, 1550nm and 1625nm wavelength, compliant with Passive Optical Network (PON) and FTTx standards.

Direct LCD Display of Output Power

The power value of SLS-50 output signal can be directly displayed on its LCD screen for easy reference.

Features:

? 6dB adjustable power output range

? Automatic wavelength identification/switch

? Remote reference value setting

? FTTx applicable

? USB power charging

? No warm-up, quick start

? Backlight

? Over 40 hours continuous operation

? Pocketsize, lightweight and easy-to-use

? CE, FCC, FDA certificates

Alte produse SHINEWAY

APARAT INSPECTIE CONEXIUNI FIBRA OPTICA SHINEWAY OCI-20A

• Eye-safe video viewing
• Inspect male and female connectors
• Various tips available
• Single-handed operation, quick focus
• Slim to access hard-to-reach connectors

SHINEWAY SPM-50 RF SPECTRUM POWER METER

• Power histogram or spectrum chart
• Preset frequency band for fast scan
• Live testing through feeder cable system

TESTER MASURA PIERDERI FIBRA OPTICA CU POWER-METRU SI SURSA LASER INTEGRATE SHINEWAY OTL-50

• FTTx/PON applicable
• Optical power monitoring
• Bidirectional loss test on single fiber
• ORL test
• Pass/Fail assessment
• Storage of 1000 test records
• Data transfer to PC via USB
• USB power charging

SURSA LASER SEMNAL OPTIC SHINEWAY MLS-20

• Multi-wavelength selectable: 650/850/1300/1310/1490/1550/1625 nm
• 650 nm visible laser source for break and macrobend detection
• Modulation in CW and modulated frequencies
• Modulation frequencies in 270,1K, 2KHz (1Hz@650nm)
• 1625nm laser source with optical power meter to measure upper limit loss in DWDM

SHINEWAY 95S FUSION SPLICER

• Auto and manual splicing
• Splicing=9s, heating=25s(time and power adjustable)
• Arc counter prompts electrode change upon usage
• Auto arc optimization

ANALIZOR OTDR RETELE METROPOLITANE FIBRA OPTICA, ACCES SI FTTX SHINEWAY MTP-1000

• up to 3 functional modules, which is specially designed for FTTx/PON
• Flexible wavelength configurations to meet different requirements
• FTTX in-service testing
• PON OTDR identifies splitter and fiber-end
• 8.4 inch touch screen
• Fast power up with Windows CE
• Damp-dust-shock proof

SURSA LASER LUMINA DOMENIU VIZIBIL SHINEWAY VLP-10/ VLS-20

• Pocket-size/pen-size, easy to use
• Fast response, no warm up
• CW/1 Hz mod
• 10Km for Max.measurement Range
• CE, FCC, FDA certificates
• One meter drop test

ANALIZOR DISPERSIE MOD POLARIZARE IN FIBRE OPTICE CWDM SHINEWAY MTP-500

• ITU-T G.650 recommended method for PMD characterization:
• Accurate total PMD, PMD coefficient
• Fully support 10G/40G/100G DWDM optical network upgrade test
• Compliant with G.650.2, EIA/TIA FOTP-124 & IEC-61941
• High dynamic range for long span measurement 40dB or 200Km
• Easy to use touch screen
• External ports: RG45x1, RS232x1, USBx2, VGAx1

VERIFICATOR CANALE FIBRA OPTICA CWDM SHINEWAY OCC-50

• Clear TFT LCD display (320*240)
• 8-channel measurement (1471-1611 nm)
• Result display in histogram and list
• Data Transfer to PC via USB
• 10 hours continuous operation

SHINEWAY MTP-200-CWDM SERIES HAND-HELD HIGH PERFORMANCE OTDR

• Up to 18CWDM wavelengths, customized
• Dynamic Range up to 36dB
• Short dead zone:EDZ 1m, ADZ 4m
• Auto/Manual test and analysis