Normal attenuator can only introduce and display an attenuation value, you need a separate power meter to measure or adjust the output power value of attenuated optical signal. Working like a combination of attenuator and power meter, OVA-50 Output Power Control mode enables direct setting of precise optical power level and can automatically stabilize output level without any interference by variations of input power.

Features:

? Attenuation range: 2.5-60dB

? Direct output power control

? Working modes

? Output power control

? Absolute/relative attenuation setting

? Program (10 preset frequently-used attenuations)

? Adjust at step of 0.05/0.10/1.00/10.00 dB

? PC control via USB

? USB power charging

? Backlight

? Over 30 hours continuous operation

? Handheld, light and easy-to-use

? CE FCC certificates

Alte produse SHINEWAY

ANALIZOR WI-FI RETELE WIRELESS SHINEWAY WFT-20

• 2.4/5GHz wireless network analysis
• Channel survey
• BSS survey
• Roaming test
• Connection test:Pack send/receive, signal strength
• Rogue AP/Rogue client detecting
• AP detector/power check
• Test report

SHINEWAY CAA-100A CABLE & ANTENNA ANALYZER

• Intelligent limit /marker /curve calculations
• More than 8 hours long battery life
• 7 inch color LCD touch screen
• Optimized batch file management: edit/delete/filter

POWER METRU RETEA FIBRA OPTICA PON SHINEWAY PPM-30

• Specially designed for FTTx/PON (B/E/G) applications
• Simultaneous Triple-play PON signals measurement: 1310/1490/1550nm (Voice/Data/Video)
• Pass/Warning/Fail assessment
• Pass-through test: Applicable anywhere on PON
• Optional Visible Fault Locator for macro bend detection and fiber identification
• Optional SM/MM Power Meter and Stabilized Laser Source

TESTER ETHERNET GIGABIT/BER SHINEWAY GET-100

• Electrical and optical ports with rate at 10/100/1000Mbps
• Ergonomic, creative design, and easy to carry
• IEEE 802.3, RFC1242, RFC2544 compliant
• L1/L2/L3 BER Test
• Full RFC2544 benchmark test
• Support VLAN test function
• Jitter Test

SURSA LASER SEMNAL OPTIC SHINEWAY MLS-20

• Multi-wavelength selectable: 650/850/1300/1310/1490/1550/1625 nm
• 650 nm visible laser source for break and macrobend detection
• Modulation in CW and modulated frequencies
• Modulation frequencies in 270,1K, 2KHz (1Hz@650nm)
• 1625nm laser source with optical power meter to measure upper limit loss in DWDM

TESTER MASURA PIERDERI FIBRA OPTICA CU POWER-METRU SI SURSA LASER INTEGRATE SHINEWAY OTL-20/ OTM-20

• Support quick test, intelligentized operation
• Graphic interface, large easy to read LCD display
• Measurement units in dB, dBm and W (or mW)
• Large memory capacity (4000 measurements)
• Interchangeable fiber-optic adapters (FC, SC, ST, P/N, E 2000)
• RS-232 data upload port

TESTER MASURA PIERDERI FIBRA OPTICA CU POWER-METRU SI SURSA LASER INTEGRATE SHINEWAY OTL-50

• FTTx/PON applicable
• Optical power monitoring
• Bidirectional loss test on single fiber
• ORL test
• Pass/Fail assessment
• Storage of 1000 test records
• Data transfer to PC via USB
• USB power charging

ATENUATOR OPTIC VARIABIL SHINEWAY OVA-50

• Attenuation Range: 2.5-60dB
• Direct Output Power Control
• Adjust at step of 0.05/0.10/1.00/10.00 dB
• PC Control via USB
• Backlight

ANALIZOR DISPERSIE MOD POLARIZARE IN FIBRE OPTICE CWDM SHINEWAY MTP-500

• ITU-T G.650 recommended method for PMD characterization:
• Accurate total PMD, PMD coefficient
• Fully support 10G/40G/100G DWDM optical network upgrade test
• Compliant with G.650.2, EIA/TIA FOTP-124 & IEC-61941
• High dynamic range for long span measurement 40dB or 200Km
• Easy to use touch screen
• External ports: RG45x1, RS232x1, USBx2, VGAx1

ANALIZOR PORTABIL DE TRANSMISIUNI DATE/ BERT/ E1/ JITTER/ G.703/ PCM SHINEWAY DTA-BERT

• In/Out band & ITU-T V.54 BERT histogram analysis
• DSO control loop codes (Optional)
• Large TFT color LCD display
• Internal memory for test data storage
• Test report
• Print via Parallel/RS-232 port (Optional