Easy to use hand held 5 gas analyser.
Declaration of conformity to OIML R99 Class 1.
Certificate of calibration supplied.
Ideal for emissions diagnostics, tuning and regulated testing. Measures CO, HC, O2, CO₂, and Lambda (or AFR).
Fast warm up time and fast response time with higher output pump.
5 language options built in
Store up to 250 Tests
RPM and oil temperature measurements plus accessories.
Prints via optional Infra-red printer.
PC compatible via RS232 for uploading stored data to PC for spreadsheet or graphical analysis and printing.

Box Contents

Anlayser with protective rubber sleeve
Water trap and filter
12v adapter cable
AC power supply/battery charger
Spare filters
Exhaust probe
Carry case
Manual

Specification

Parameter	Resolution	Accuracy	Range
Carbon Monoxide	0.01%	�5% of reading^1 �0.06% volume^1	0-10% Over-range 20%
Oxygen 02 (Fuel Cell)	0.01%	�5% of reading ^1 �0.1% volume^1	0-25% Over-range 48%
Hydrocarbon (HC-hexane) (NDIR)	1ppm	�5% of reading^1 �12ppm volume^1	0-3000ppm Over-range: 10,000ppm
Carbon Dioxide (Infrared)	1ppm	�5% of reading^1 �0.5% volume^1	0-16% Over-range: 25%
Nitric Oxide^*2 (fuel cell)	1ppm	0-4000ppm �4% or 25ppm; 4000 - 5000ppm �5%	0-5000ppm
Oil Temperature	0.1°C/F	�2.0°C�0.3% of reading �3.6°F�0.3% of reading	0-150°C 32-302°F
RMP	1 rpm	50 rpm	200-6,000 rpm.
Carbon Monoxide Corrected CO	0.01%	Calculated	0-15%
Lambda AFR (Petrol) (LPG)	0.001 00.01		0.8 - 1.2 11.76 - 17.64 12.48 - 18.72

^*1 Using dry gases at STP

^*2 Standard on models Auto 5-2 and 5-1 only

To obtain the quoted specificaton an instrument should be calibrated with clean ambient air (normally outside the workshop) at standard temperature and pressure (STP).

**Note:** The analyser is not for use with a Dynometer, unless the high temperature probe is fitted.

Sensor response T₉₅	15 seconds for Auto 4-1, 5-1 Nominal 20 seconds Auto 4-2, 5-2, 4-3 & 5-3
Warm Up	Less than 3 minutes
Pre-programmed Fuels	Petrol, LPG and CNG
Data-Logging	255 Snap Shots
Dimensions Weight Handset Probe	1kg 220mm x 55mm 120mm Insertion depth 350mm x Diameter 15mm Clip handle to secure to exhaust, 4m long home Various probes available including high temperature
Ambient Operating Range	+5°C to +40°C/10% to 90% RH non condensing
Storage temperature	Minimum: 0°C Maximum: +50°C
Battery Charger	Input: 110Vac/230 Vac nominal Output: 10Vac off load
Analyser battery run time	>4hours from full charge with the pump running

Accesorii standard

Box Contents

Anlayser with protective rubber sleeve
Water trap and filter
12v adapter cable
AC power supply/battery charger
Spare filters
Exhaust probe
Carry case
Manual

Optiuni recomandate

KMIRP Infrared Printer with thermal printer and AA batteries

KANE IMPRINT

Infrared Printer with standard paper roll and ink ribbon, supplied with rechargeable batteries, battery charger and 2 paper rolls

NOX4-1 NOx upgrade for Auto 4-1

NOX4-2 NOx upgrade for Auto 4-2

AUTOSWKIT Auto software kit with CL3 lead for PC interface

14102/2 Laptop style carry case

17590 Metal Carry Case

EPAUTO3 High temp. EPAUTO2 probe with 17702 inline filter

EPAUTO5 High temp. probe with black hose

EPAUTO6 Motorbike Probe with emission temperature measurement

Alte produse KANE

KANE AUTOPLUS 5-2 ANALIZOR EMISII AUTO GAZE ESAPAMENT 5-GAZE

• AUTOplus 5-2 Hand Held 4 Gas Analyser - CO, HC, CO2, O2, NOx
• it can be used on Petrol/Gasoline, LPG, CNG & Diesel vehicles
• ideal for Pre-compliance testing, vehicle diagnostics and servicing to manufacturers specification
• Bluetooth
• USB/Serial with optional cable and software

KANE 945 ANALIZOR GAZE ARSE EMISII INDUSTRIALE KANE945

• Upgradeable industrial emissions analyser with heavy duty pump
• Measures O2, CO, NO, NO2, SO2
• Calculates CO2, CO/CO2 ratio, Excess air, Combustion efficiency, *NOx (if NO sensor fitted)
• Fuels Types: Natural Gas, Butane, Propane, LPG, 35 sec oil, Heavy oil, Solid fuel, User fuel, 28 sec oil

KANE 9206 QUINTOX ANALIZOR EMISII INDUSTRIALE SI GAZE ARSE KANE9206

• KANE9206 QUINTOX Fully featured emissions analyser
• For Industrial, Commercial, Oil, Biomass, Boiler Commissioning & Servicing, Monitoring
• Up to 5 additional electro-chemical sensors plus one complete infra-red module
• Measures O2, CO, NO, NO2, SO2, H2S
• Infrared Module for CO, HC, CO2
• Large Graphical Display
• Wireless link from the handset to the base unit
• GPS Location
• Wireless & USB connection to PC

KANE AUTO4-4 ANALIZOR EMISII AUTO GAZE ESAPAMENT 4-GAZE

• Measures CO, HC, O2, CO2, and Lambda (or AFR)
• Unique rotary switch to quickly select the parameters required
• Robust, reliable and accurate
• Weighing under 1kg, the handset fits comfortably in the hand
• Ideal for emission diagnostics, tuning and regulated testing.

KANE 451PLUS ANALIZOR DE GAZ KANE451+

• High range 5 year life sensor - ideal for biomass appliances
• Measures CO2 direct with an infra-red sensor, CO, NO (High/Low optional upgrade), Differential temperature, differential pressure
• Calculates O2, CO/CO2 ratio, Combustion efficiency, Excess Air
• Pre-programmed Fuels: Natural gas, Propane, Butane, LPG, Light Oils (28/35 sec), Wood Pellets plus 3 User Fuels

KANE 450 ANALIZOR DE GAZE KANE450

• Oxygen measuring commercial analyser with a H2 compensated CO sensor
• Measures CO , O2, NO (High/Low optional upgrade), High accuracy differential pressure, Differential temperature
• Calculates CO2, CO/CO2 ratio, NOx (optional), Excess air, Combustion efficiency
• Fuels Types: Natural Gas, Butane, Propane, LPG, 28 sec oil, 35 sec oil, Wood pellets

KANE AUTO4-1 ANALIZOR EMISII AUTO CLASA 1 OIML 4-GAZE

• Hand Held 4 Gas Analyser OIML Class 1
• Measures CO, HC, O2, CO2, and Lambda (or AFR)
• Pre-programmed Fuels Petrol, LPG and CNG
• Ideal for emissions diagnostics, tuning and regulated testing
• Store up to 250 Tests
• RPM and oil temperature measurements plus accessories.
• Prints via optional Infra-red printer.

KANE 251 ANALIZOR DE GAZE BIOMASA KANE251

• Entry level biomass analyser
• Measures CO 0-10,000ppm, CO2 0-20%
• Calculates O2, CO/CO2 ratio, Combustion efficiency
• Pre-programme fuels : Natural gas, Light Oil, Propane, Butane, LPG, Wood Pellets.

KANE AUTOPLUS 4-2 ANALIZOR EMISII AUTO GAZE ESAPAMENT 4-GAZE

• AUTOplus 4-2 Hand Held 4 Gas Analyser - CO, HC, CO2, & O2
• it can be used on Petrol/Gasoline, LPG, CNG & Diesel vehicles
• ideal for Pre-compliance testing, vehicle diagnostics and servicing to manufacturers specification
• Bluetooth
• USB/Serial with optional cable and software

KANE AUTO5-1 ANALIZOR EMISII AUTO CLASA 1 OIML 5-GAZE

• Hand Held 5 Gas Analyser OIML Class 1
• Measures CO, HC, O2, CO2, NOx and Lambda (or AFR)
• Pre-programmed Fuels Petrol, LPG and CNG
• Ideal for emissions diagnostics, tuning and regulated testing
• Store up to 250 Tests
• RPM and oil temperature measurements plus accessories.
• Prints via optional Infra-red printer.