Extech MA130 Cleste de curent Mini 200A AC

• Constantly calculates and adjusts the Voltage and Current limit points according to available maximum power (160W)
• At maximum current (10A), voltage is limited to 16V
• At maximum voltage (42V), current is limited to 3.8A
• Dual action rotary encoder control with push knob for fine and coarse tuning

 

• Displays moisture in wood and other building materials plus Air Temperature and Relative Humidity
• Digital LCD readout with analog bargraph and numerical displays
• Simultaneous digital readout of moisture content plus ambient temperature or humidity with analog bargraph display of moisture, Max moisture values, and programmable wet/dry indication
• Use on wood, paper, wall board, sheet rock, cardboard, plaster, concrete, and mortar

 

• Works with GFCI circuits
• Tests for faulty wiring in 3-wire receptacles: Correct, Open Ground, Open Neutral, Open Hot, Hot/Ground Reverse, Hot/Neutral Reverse
• Lights indicate circuit condition
• Standard North American 3-prong plug

 

• Simultaneously displays Carbon Monoxide (CO) concentration, Air Temperature, and Relative Humidity readings with date (Year, Month, Day) and time
• Visibly bright LED indicates active monitoring (green) or surpassed CO alarm threshold (red)
• Extra loud audible beeper alarm level meets UL 2013 Standard (>85dB @ 3 meters); default alarm threshold at 30ppm (user adjustable)
• Designed with Electrochemical CO sensor
• Record/Recall Max reading for CO concentration
• CO calibration function in fresh air

 

• Checks for Carbon Dioxide (CO2) concentrations
• Calculates statistical weighted averages of TWA (8 hour time weighted average) and STEL (15 minute short term exposure limit)
• Maintenance free NDIR (non-dispersive infrared) CO2 sensor

 

• Includes CL200 meter, pH and ORP electrodes, reagent tablets, 4 plastic cups, weighted stand, pH buffer pouches, batteries and carrying case
• 4-in-1 Water Quality Meter measures Chlorine, pH, ORP plus Temperature with interchangeable flat surface electrodes (included)
• Flat surface electrodes work in liquids, semi-solids and solids
• Memory stores and recalls 15 readings and saves last calibrated value
• Large 3-1/2 digit (2000 count) Digital display with bargraph

 

• High test voltages up to 10kV with Insulation Resistance to 500GOhm
• Polarization Index (PI) measurement
• Dielectric Absorption Ratio (DAR) measurement
• EnerSave™ limits test duration to 10 seconds to save energy
• Complete with built-in heavy duty carrying case with cover, test leads, alligator clips, and 8 x C batteries

 

• Built-in sensors measure Air Velocity, Air Flow, Temperature, Humidity, Wet Bulb, Dew Point, Heat Index, Wind Chill, Barometric Pressure, Altitude, and UV Light
• Field replaceable low friction vane wheel improves air velocity accuracy
• Backlit LCD display (auto off after 5 seconds)
• Data Hold, Auto Power Off
• Complete with built-in multiparameter sensors, wrist strap, and CR2032 battery

 

• High basic DC Voltage accuracy of 0.08%
• Wide AC Voltage bandwidth of 40Hz to 20kHz
• Rugged design with protective holster and water resistant housing
• Backlit 5000 count LCD display for high resolution (0.01mV, 0.1µA, 0.01Ohm, 0.01nF, 0.001Hz)

 

• Measure Humidity, Air Temperature (with built-in probe) plus non-contact InfraRed Temperature
• Pinless moisture sensor allows to monitor moisture in wood and other building materials with no surface damage
• Remote pin-type probe (MO290-P) for contact moisture readings (3ft/0.9m cable length)
• Select from multiple wood types and measurement ranges
• Easy to read, large dual display with backlit feature