The CO30 is a CO Monitor which displays Carbon Monoxide (CO) concentration, Air Temperature, and Relative Humidity. The CO30 features a programmable audible alarm with a high decibel beeper, sounds when CO concentration rises to unsafe levels. Unit can be wall mounted or used on a desktop close to areas of concern. Other features include a visible bright tri-colored (green, yellow, red) LED alarm indicator, a "ZERO" re-calibration function, manual temperature and relative humidity compensation (adjustable), CO calibration function in fresh air, and a low battery indicator. Complete with universal AC adaptor (including US, EU, UK, and AU plugs), and 4 AAA batteries.

� Alternately displays Carbon Monoxide (CO) concentration, Air Temperature, and Relative Humidity readings (cycles approximately every 6 seconds)

� Visible bright tri-colored (green, yellow, red) LED alarm indicator

� Adjustable audible alarm for readings exceeding one of the selected ranges: 25ppm, 30ppm, 35ppm, 50ppm, 100ppm or 200ppm

� ZERO Re-Calibration function

� Manual Temperature and Relative Humidity Compensation (adjustable)

� CO Calibration function in fresh air

� Low battery indicator

� Complete with universal AC adaptor (including US, EU, UK, and AU plugs), and 4 AAA batteries

Alte produse EXTECH

EXTECH HD700 MANOMETRU DIGITAL PRESIUNE DIFERENTIALA(2PSI)

• ±2psi range, 11 Selectable units of measure
• Max/Min/Avg recording and Relative time stamp
• Data Hold, Auto power off and Zero function
• Large LCD display with backlighting

EXTECH EX503 MULTIMETRU INDISTRIAL ROBUS SOLID CU 10 FUNCTII

• Averaging DMM with 10 functions and 0.5% basic accuracy
• AC/DC Voltage & Current, Resistance, Capacitance, Frequency, Duty Cycle, Diode/Continuity
• Dual sensitivity frequency functions (electrical/electronic)
• 1000V input protection on all functions
• 10A max Current

EXTECH 407750 SONOMETRU CU INTERFATA PC

• Meets ANSI & IEC 651 Type 2 standards
• Background noise absorber for machine noise measurements filters ambient noise
• 30 to 130dB measurement range with ±1.5dB accuracy
• Large display with backlighting and analog bargraph

EXTECH 380405 BOXA DECADICA CAPACITATI

• Durable construction
• Case may be grounded separately
• 3 binding posts permit isolated substitutions
• 5% Capacitance substitution from 100pF to 11,111µF
• Excellent for circuit development
• Five decade ranges of capacitance

EXTECH 380803 ANALIZOR PUTERE CU DATALOGGER

• Built-in Datalogger stores up to 1,012 readings (single record/continuous datalogging)
• Four simultaneous displays of Watts, Power Factor or VA, Voltage or Hz, Amps
• True RMS Voltage & Current measurements of sine, square, triangular and distorted wave forms with a crest factor < 5
• Plug device to be tested directly into the Power Analyzer

KIT TESTER MULTIFUNCTIONAL EXSTIK 4 IN 1 (CLOR, PH, ORP SI TEMPERATURA) - EXTECH EX900

• Includes CL200 meter, pH and ORP electrodes, reagent tablets, 4 plastic cups, weighted stand, pH buffer pouches, batteries and carrying case
• 4-in-1 Water Quality Meter measures Chlorine, pH, ORP plus Temperature with interchangeable flat surface electrodes (included)
• Flat surface electrodes work in liquids, semi-solids and solids
• Memory stores and recalls 15 readings and saves last calibrated value
• Large 3-1/2 digit (2000 count) Digital display with bargraph

EXTECH EX410A MULTIMETRU PROFESIONAL CU 8 FUNCTII

• Averaging DMM with 8 functions and 0.5% basic accuracy
• AC/DC Voltage & Current, Resistance, Temperature, Diode/Continuity
• Input fuse protection and mis-connection warning
• 10A max Current

EXTECH PD20 TERMO-PEDOMETRU

• Total Step mode displays the total accumulated steps user walked after 7-day storage
• Auto power saving mode when meter detects no movement for 10 minutes
• Includes case with built-in clip to wear on your clothes and designed with lanyard insert hole (lanyard not included) to wear around your neck
• Complete with CR2032 battery and nylon case with window opening for display viewing and belt-clip

EXTECH CT70 TESTER GFCI SI ANALIZOR CIRCUIT AC

• Selectable loads of 12, 15 and 20 Amps
• Measures loaded and unloaded AC Line Voltage
• Calculates and displays % Voltage Drop and Line Impedance
• Displays Peak Line Voltage and Frequency

EXTECH SD910: 3-CHANNEL DC VOLTAGE DATALOGGER

• Triple LCD simultaneously displays three DC Voltage (mV) channels
• Datalogger date/time stamps and stores readings on an SD card in Excel® format for easy transfer to a PC
• Selectable data sampling rate: 2, 5, 10, 30, 60, 120, 300, 600 seconds or Auto
• Complete with 6 AAA batteries, SD memory card, Universal AC adaptor with multi-plugs (US, EU, UK, AU), 3 input sockets and mounting bracket