This 407026 Heavy Duty Light Meter has 4 lighting type settings for enhanced accuracy (Tungsten/Daylight, Fluorescent, Sodium, Mercury). Additional features include Data Hold, Min/Max/Average, Auto power off and a % reading of the differential from a reference point. Built-in RS-232 interface with optional Data Acquisition Software and Data logger. Complete with 9V battery, light sensor with 45" (1.1m) cable, protective cover, and holster with stand.

Features:

� Simultaneous display of Foot Candles or Lux and lighting type

� Large 1.4" (1999 count) LCD display

� % displays differential from reference point

� "ZERO" Re-Calibration

� Utilizes precision photo diode and color correction filter

� Cosine and color corrected measurements

� �4% accuracy is enhanced by selecting lighting type (Tungsten/Daylight, Fluorescent, Sodium, Mercury)

� Record/Recall MIN, MAX and AVG readings, Data Hold plus Auto shut off

� Built-in RS232 serial interface, optional software

Alte produse EXTECH

EXTECH SDL700 TESTER DE PREIUNE CI INREGISTRARE DATALOGGER

• Accepts interchangeable transducers with ranges of 30, 150, 300psi (transducers sold separately)
• Meter automatically senses plug-in transducer's range and calibration
• Displays 10 types of pressure units
• Offset adjustment used for zero function to make relative measurements

EXTECH 380820 SURSA UNIVERSALA AC SI ANALIZOR PUTERE

• 99 memory locations for preset voltage and frequency output settings
• User-programmable Over Current Protection
• Programmable through the built-in RS-232 interface
• Data acquisition mode captures readings to your PC with a user-programmable sampling rate of 2 to 65,535 seconds
• Complete with AC power cord, RS-232 to USB cable and software

EXTECH EMF510 MULTIMETRU RADIATII ELECTRICE MAGNETICE

• Measure EMF/ELF levels in milliGauss (mG) or microTesla (�T) up to 2000mG (200�T) with two ranges to choose from
• Built-in single axis sensor provides basic accuracy reading of �5%
• 30 to 300Hz bandwidth
• Backlit display to view in dimly lit areas
• Data Hold and Min/Max functions

EXTECH PRT200 TESTER SECVENTA FAZA FARA CONTACT

• 75 to 1000VAC input voltage with 45 to 65Hz frequency range
• LEDs indicate phase orientation (clockwise or counter-clockwise) and whether each phase is live
• Beeper sounds intermittently when correct phase is detected and continuously if phase is reversed
• Durable housing with back cover magnet for attachment to an AC distribution panel for easy measurement

EXTECH MA140 CLESTE DE CURENT TRUE RMS 300A AC

• True RMS for accurate readings of noisy, distorted or non-sinusoidal waveforms
• Compact 0.8" (22mm) jaw size accommodates conductors up to 300MCM and allows measurements in tight locations
• Unique Smart Auto Sense feature
• Low Pass Filter (LPF) for accurate measurement of variable frequency drive signals
• Built-in Non-Contact Voltage (NCV) detector for quick detection of live voltage
• Inrush current measurement

EXTECH EX470 MULTIMETRU PROFESIONAL TRURMS SI TERMOMETRU INFRAROSU

• True RMS DMM with 12 functions and 0.3% basic accuracy
• AC/DC Voltage & Current, Resistance, Capacitance, Frequency, TypeK & IR Temperature, Diode/Continuity, Duty Cycle
• Built-in non-contact InfraRed Thermometer with 8:1 distance to target ratio with 0.95 fixed emissivity
• Input fuse protection and mis-connection warning
• 20A max Current

EXTECH MP530A MULTIPRO® MULTIMETRU PERFORMANT

• High basic DC Voltage accuracy of 0.08%
• Wide AC Voltage bandwidth of 40Hz to 20kHz
• Rugged design with protective holster and water resistant housing
• Backlit 5000 count LCD display for high resolution (0.01mV, 0.1�A, 0.01Ohm, 0.01nF, 0.001Hz)

EXTECH MA410 CLESTE CURENT 400A AC + DETECTOR FARA CONTACT

• AC Current, AC/DC Voltage, Resistance, Frequency, Capacitance, Temperature, Duty Cycle, Diode and Continuity
• Integrated Non-Contact Voltage Detector with LED alert
• Compact size allows measurments in tight locations
• 1.2" (30mm) jaw size for conductors up to 350MCM
• Relative Mode for Capacitance Zero and Offset Adjustment

EXTECH MO25 UMIDIMETRU TIP STILOU

• Easy-to-use one button operation
• Data Hold and Auto power off
• Battery level check on power-up
• Complete with protective cap, built-in pocket clip, and one AAA battery

EXTECH CT20 TESTER CONTINUITATE

• A bright flashing LED and loud pulsating beeper indicate local continuity
• Remote continuity with the use of the remote probe
• Flashing remote probe - two lead, bi-color (red/green) LED probe allows a single user to identify up to three wires or cables at a time
• Lightweight and pocketsized, clips on and hangs from the cable(s) under test without falling off
• Great for Electricians and Helpers, Cable TV and Audio System Installers, Alarm Technicians, Plumbers, HVAC Installers etc.