Display (LCD, Digital Counts)	1999
AC Current Accuracy (200A Reference)	1.5+4(50/60Hz) 2.0+5(40~1kHz)
AC Current Accuracy (600A Reference)	1.5+4(50/60Hz) 2.0+5(40~1kHz)
AC Voltage Accuracy (200V/600V Reference)	1.0+2(50/60Hz) 1.5+4(40~1kHz)
Crest Factor	(50/60Hz)
Resistance Accuracy (200O reference)	1.2+4, Beeps at below 30O (continuity check)
Method of detection	True RMS
Response Time	Approx. 1 seconds (approx. 2 seconds on resistance range)
Range Switching	Manual-range
Data hold	On all range
Operating temperature and humidity	-10-50°C. (no condensation) up to 30°C, 90% RH up to 40°C, 75% RH up to 50°C, 45% RH
Influence of external magnetic field	2A or less at 400A/m
Influence of conductor position	± 3% or less
Safety Standard	Conforms EN 61010-1, EN61010-2-031, EN61010-2-032
Circuit voltage	600Vrms or less
Withstanding voltage	5.55kV AC for one minute
Power Supply	6F22(006P)9Vx1 or 6LR61x2
Battery Life¹	100 hours
Consumed current	Approx. 2mA
Auto power-off	Approx. 10 minutes
Diameter of measurable conductor	30mm at maximum
Dimensions	Approx. 93(W)x210(H)x40(D)mm
Weight (Approx.)	400g
Accessories	Clamp Adapter (Model 99025), Carrying Case (Model 93032), Test Lead (Model 98010), User's manual (IM CL120), batteries
Order Notes	Each item selected MUST be ordered as a separate line item.
Product Notes	All Clamp-on Meters include Test Leads (where applicable) and a carrying case.

Alte produse YOKOGAWA

YOKOGAWA DIGITAL MULTIMETER TY720

• True RMS measurement
• New Functions for Electronic and Industrial Use
• Simultaneous measurement and display of DC and AC
• Switchable RMS/MEAN detection

YOKOGAWA LOW PRESSURE CALIBRATOR CA700

• IP54 dustproof and water proof case for harsh environments
• 4-20mA step function for signal generation
• 20mA Simulator to carry out loop test.
• Two-wire Transmitter Loop Check

YOKOGAWA PROCESS MULTIMETER CA450

• Simultaneous 24 V loop power and mA measurement
• HART mode setting with loop power (250 OHM resistance)
• High accuracy signal measurement: DC mA 0.05%/30.000 mA
• Handheld DMM function
• Peak/Hold function for DCS power peak-to-peak measurement

YOKOGAWA DMM PORTABIL TY530

• Basic accuracy 0.09%
• True RMS measurement
• Ensured Field Site Safety
• Conforms to safety standards EN61010-1, 1000V CAT III, 600V CAT IV

YOKOGAWA - SL1000 UNITATE ACHIZITII DE DATE VITEZA INALTA

• Fast Acquisition
• Fast Transfer and Storage
• Easy to use
• Can operate "Standalone"

YOKOGAWA - AQ6376 THREE MICRON OPTICAL SPECTRUM ANALYZER

• Long wavelength range: 1500 to 3400 nm
• Gas purging ports to reduce water vapor effects
• Built-In cut filter for high order diffracted light
• Double Speed Mode to further enhance fast measurement speed

YOKOGAWA AQ2170 SERIES PORTABLE OPTICAL POWER METER (SIMPLE & COMPACT)

• Two versions of Power Meters to suit test application
• Compact and lightweight
• Rubber protector to prevent damage when dropped

YOKOGAWA CALIBRATOR DE PROCES CA300 CA310 CA320 CA330

• Basic Accuracy: 0.015% (Source&Meas. accuracy of Voltage mA)
• Simultaneously supplies 24V loop power and measure output signal with high accuracy
• Sub display displays span% of the source value
• HART/BRAIN comm. resistance (250O) embedded

YOKOGAWA CLAMP-ON PROCESS METER CL420 (DC MA CURRENT)

• 0.2% Accuracy, 0.01mA Resolution
• Dual Display
• LED Torch Light, Backlight Display
• Analog Output Available

YOKOGAWA DIGITAL RESISTANCE METER 7556

• Wide operating rangeability (1 Ohm range to 100 M Ohm range)
• Full remote controlability via the standard RS232C serial, or optional GP-IB interfaces
• Software based calibration
• Printer output of measurement, and statistical analysis results