Analizor dispersie mod polarizare in fibre optice CWDM Shineway MTP-500

Cod: Shineway MTP-500


 

Brosura produs PDF, 0.48 Mb
   

Descriere

  • ITU-T G.650 recommended method for PMD characterization:
  • Accurate total PMD, PMD coefficient
  • Intelligent certification: Threshold setting enables auto Pass/Fail assessment
  • Fully support 10G/40G/100G DWDM optical network upgrade test
  • High-speed scanning technique enables the best immunity against fiber movement during test
  • Compliant with G.650.2, EIA/TIA FOTP-124 & IEC-61941
  • High dynamic range for long span measurement 40dB or 200Km, 48dB high power light source available for 240Km
  • Industry’s fastest measurement speed: 2s
  • Test through optical amplifiers
  • Suitable for aerial and buried fiber infrastructure
  • Windows XP with PMD Analyzer software for fast setup and easy handling
  • Easy to use touch screen
  • Professional and comprehensive test report
  • Internal battery supports 5 hours continuous
  • operation
  • Rugged casing, field application ready
  • External ports: RG45x1, RS232x1, USBx2, VGAx1
  • CE, FCC certificates

MTP-500-A PMD Analyzer

MTP-500-L PMD Source

 

 

Alte produse SHINEWAY

ANALIZOR DISPERSIE MOD POLARIZARE IN FIBRE OPTICE CWDM SHINEWAY MTP-500

• ITU-T G.650 recommended method for PMD characterization:
• Accurate total PMD, PMD coefficient
• Fully support 10G/40G/100G DWDM optical network upgrade test
• Compliant with G.650.2, EIA/TIA FOTP-124 & IEC-61941
• High dynamic range for long span measurement 40dB or 200Km
• Easy to use touch screen
• External ports: RG45x1, RS232x1, USBx2, VGAx1

 

TESTER ETHERNET GIGABIT/BER SHINEWAY GET-100

• Electrical and optical ports with rate at 10/100/1000Mbps
• Ergonomic, creative design, and easy to carry
• IEEE 802.3, RFC1242, RFC2544 compliant
• L1/L2/L3 BER Test
• Full RFC2544 benchmark test
• Support VLAN test function
• Jitter Test

 

IDENTIFICATOR FIBRA OPTICA SHINEWAY OFI-20A/ OFI-20B

• Fiber types: 250µm, 900µm, 2mm/3mm jacketed fiber
• Non-destructive detection
• Indication of signal presence, strength and direction
• CW/MOD tones detection
• Buzzer indication
• Handheld & sturdy
• CE, FCC certificates

 

SHINEWAY MTP-200-CWDM SERIES HAND-HELD HIGH PERFORMANCE OTDR

• Up to 18CWDM wavelengths, customized
• Dynamic Range up to 36dB
• Short dead zone:EDZ 1m, ADZ 4m
• Auto/Manual test and analysis

 

ATENUATOR OPTIC VARIABIL SHINEWAY OVA-50

• Attenuation Range: 2.5-60dB
• Direct Output Power Control
• Adjust at step of 0.05/0.10/1.00/10.00 dB
• PC Control via USB
• Backlight

 

TESTER MASURA PIERDERI FIBRA OPTICA CU POWER-METRU SI SURSA LASER INTEGRATE SHINEWAY OTL-20/ OTM-20

• Support quick test, intelligentized operation
• Graphic interface, large easy to read LCD display
• Measurement units in dB, dBm and W (or mW)
• Large memory capacity (4000 measurements)
• Interchangeable fiber-optic adapters (FC, SC, ST, P/N, E 2000)
• RS-232 data upload port

 

APARAT SUDURA FIBRA OPTICA SHINEWAY OFS-80

• 5.7" Turn-over LCD screen for clear display Both X and Y axis display
• Fiber core can be display clearly
• Inner light to set fiber in dark environment Auto check fiber end-face
• Auto calculate splicing loss
• 9 seconds splice time and selectable heating mode
• 3 hours fast recharge
• 60 preset/user-definable splicing programs

 

SHINEWAY OPM-15/25 OPTICAL POWER METER

• Interchangeable connectors: FC/SC/ST
• Dual-way power supply: 9V alkaline battery/AC adapter (optional)
• Pocketsize, lightweight and damp-dust-shock proof
• Power saving: Auto-off setting

 

SHINEWAY MTP-200-OSA OPTICAL SPECTRUM ANALYZER / CHANNEL ANALYZER

• Channel power measurement
• Channel threshold detection
• In-band OSNR measurement

 

TESTER MASURA PIERDERI FIBRA OPTICA CU POWER-METRU SI SURSA LASER INTEGRATE SHINEWAY OTL-50

• FTTx/PON applicable
• Optical power monitoring
• Bidirectional loss test on single fiber
• ORL test
• Pass/Fail assessment
• Storage of 1000 test records
• Data transfer to PC via USB
• USB power charging