Analizor de spectru 20 Hz..3.6/ 7/ 13.6/ 30/ 40 GHz Rohde & Schwarz FSV

Cod: Rohde & Schwarz FSV3/ FSV7/ FSV13/ FSV30/ FSV40


 

Brosura produs PDF, 3.42 Mb

Descriere

  • 20 Hz to 3.6 / 7 / 13.6 / 30 / 40 GHz Frequency range
  • 40 MHz analysis bandwidth
  • 0.4 dB level measurement uncertainty up to 7 GHz
  • Measurement applications for GSM/EDGE (including EDGE evo), WCDMA/HSPA+, LTE, WiMAX™, WLAN, CDMA2000®, 1xEV-DO
  • Easy on-site upgrading with options
  • -110 dBc (1 Hz) phase noise at 10 kHz frequency offset
  • +15 dBm third order intercept (TOI)
  • Displayed average noise level (DANL) in 1 Hz bandwidth: -155 dBm at 1 GHz, -147 dBm at 30 GHz with preamplifier R&S FSV-B24: -162 dBm at 30 GHz
  • Removable hard drive for applications where security is a concern
  • Frequency range up to 110 GHz with R&S FSV-B21 option integrated in the R&S FSV30/40 and the R&S FS-Z60/-Z75/-Z90/-Z110 harmonics mixers
  • Measurement applications for vector signal analysis
  • LXI Class C conformant
 

Optiuni recomandate

  • R&S FSV3 9 kHz to 3.6 GHz
  • R&S FSV7 9 kHz to 7 GHz
  • R&S FSV13 9 kHz to 13.6 GHz
  • R&S FSV30 9 kHz to 30 GHz
  • R&S FSV40 9 kHz to 40 GHz
  • R&S FSV with R&S FSV-B29 option 20 Hz to 3.6/7/13.6/30 GHz
 

Alte produse Rohde & Schwarz

GENERATOR SEMNAL RF 9 KHZ..3 GHZ/ 6 GHZ ROHDE & SCHWARZ SMA100A

• 9 kHz to 3 GHz or 6 GHz Frequency range
• Frequency, level and LF sweeps
• Very low SSB phase noise of typ. -134 dBc
• Phase-continuous frequency setting

 

POWERMETRU RF USB 10 MHZ..18 GHZ ROHDE & SCHWARZ NRP-Z23

• 10 MHz to 18 GHz
• -47 dBm to +42 dBm (20 nW to 15 W)
• 89 dB dynamic range for CW and modulated signals

 

R&S ZND VECTOR NETWORK ANALYZERS

• Two-port network analyzer for unidirectional measurements from 100 kHz to 4.5 GHz
• Frequency range can be extended to 8.5 GHz
• Test set can be enhanced for bidirectional measurements

 

ANALIZOR PORTABIL CABLU & ANTENA 100 KHZ..3.6 GHZ/ 8 GHZ ROHDE & SCHWARZ ZVH

• 100 kHz to 3.6 GHz or 8 GHz Frequency range
• reflection measurement
• distance-to-fault measurement
• one-port cable loss measurement
• Optional Spectrum Analysis, Power Meter, Spectrogram, Transmission Measurement

 

R&S CMW270 WIRELESS CONNECTIVITY TESTER

• Dual tester concept with multiple-standard RF measurements for WLAN (802.11 a,b,g,n,p,ac) SISO/MIMO and Bluetooth®
• General-purpose ARB generator for WLAN, Bluetooth®, GNSS and various broadcast technologies
• Continuous frequency range up to 6 GHz

 

ANALIZOR DE SPECTRU 9 KHZ..3 GHZ ROHDE & SCHWARZ FS300

• 9 kHz to 3 GHz Frequency range
• 200 Hz to 1 MHz RBW
• 1 Hz Frequency counter resolution
• +33 dBm Maximum input level

 

GENERATOR SEMNAL RF 9 KHZ..1.1 GHZ/ 2.2 GHZ/ 3.2 GHZ/ 6 GHZ/ 12.75 GHZ ROHDE & SCHWARZ SMB100A

• 9 kHz to 1.1 GHz, 2.2 GHz, 3.2 GHz or 6 GHz Frequency ranges
• 100 kHz to 12.75 GHz Frequency ranges(B112 option)
• >+18 dBm RF output level from 1 MHz to 6 GHz (+25 dBm over range)
• -128 dBc/Hz SSB phase noise typ(1 GHz/20 kHz offset)

 

R&S NRP2 POWER METER

• Optionally integrated 50 MHz/1 mW reference source
• Hardware interfaces for remote control and triggering
• Emulation of other legacy power meter
• User-programmable save/recall locations

 

ANALIZOR DE SPECTRU PORTABIL 10 MHZ..18 GHZ ROHDE & SCHWARZ FSH18

• 10 MHz to 18 GHz Frequency range
• 100 Hz to 1 MHz RBW
• 10 Hz to 1MHz VBW

 

ANALIZOR AUDIO ANALOG/DIGITAL ROHDE & SCHWARZ UPV

• Suitable for all interfaces: analog, digital and combined
• Sampling rate up to 400 kHz
• Compact instrument with integrated PC
• generate a wide variety of analog and digital test signals
• Efficient as well as multichannel FFT analysis with a resolution down to the mHz
• Everything included; no peripherals required