9 kHz to 3.6 GHz Frequency range
100 Hz to 3 MHz RBW
<-141dBm sensitivity, with preamp <-161 dBm
Low measurement uncertainty (< 1 dB)
TDMA power, channel power, field stringth, OBW, channel table
Easy to replace Li-Ion battery, up to 4.5 hr operation
Internal VSWR bridge (FSH424/828)
Two-port network analyzer (opt. FSH-K42)
20 MHz demodulation bandwidth for analyzing LTE signals
Directional power measurements up to 4 GHz under operating conditions
SD memory expansion slot to store measurements, results and installation settings
Larger 6.5" Color LCD display
USB and LAN interfaces
Rugged, splash-proof housing for rough work in the field

Optiuni recomandate

Rohde & Schwarz FSH404 Spectrum Analyzer 9 kHz to 3.6 GHz. With Preamplifier
Rohde & Schwarz FSH414 Spectrum Analyzer 9 kHz to 3.6 GHz. With Preamplifier, Tracking Generator
Rohde & Schwarz FSH424 Spectrum Analyzer 100 kHz to 3.6 GHz. With Preamplifier, Tracking Generator, Internal VSWR Bridge

FSH-K40 Enables full LAN/USB Remote Control

FSH-K41 Distance to Fault Measurements Only for models FSH424 and FSH828. FSH-Z320 or FSH-Z321 is also required.

FSH-K42 Vector Transmission/Reflection Measurements

Alte produse Rohde & Schwarz

OSCILOSCOP DIGITAL 4 X 500 MHZ ROHDE & SCHWARZ RTM1054

• 500 MHz bandwidth
• 4 analog channels
• 2.5 GSa/s sample rate, 5 GS/s interleaved

ANALIZOR DE SPECTRU PORTABIL 9 KHZ..3.6 GHZ ROHDE & SCHWARZ FSH4

• 9 kHz to 3.6 GHz Frequency range
• 100 Hz to 3 MHz RBW
• <-141dBm sensitivity, with preamp <-161 dBm

ANALIZOR DE RETEA VECTORIAL 9 KHZ..3/ 6/ 13.6 GHZ ROHDE & SCHWARZ ZVL

• 9 kHz to 3 GHz/ 6 GHz or 13.6 GHz
• Bidirectional two-port vector network analyzer
• Measurement of all four S-parameters, impedance, admittance and stability

POWERMETRU RF USB 10 MHZ..8 GHZ ROHDE & SCHWARZ NRP-Z11

• 10 MHz to 8 GHz
• -67 dBm to +23 dBm (200 pW to 200 mW)
• 90 dB dynamic range for CW and modulated signals

ANALIZOR PORTABIL CABLU & ANTENA 100 KHZ..3.6 GHZ/ 8 GHZ ROHDE & SCHWARZ ZVH

• 100 kHz to 3.6 GHz or 8 GHz Frequency range
• reflection measurement
• distance-to-fault measurement
• one-port cable loss measurement
• Optional Spectrum Analysis, Power Meter, Spectrogram, Transmission Measurement

ANALIZOR DE SPECTRU IN TIMP REAL 10 HZ..7/ 13.6/ 30/ 40 GHZ ROHDE & SCHWARZ FSVR

• 10 Hz to 7 GHz, 13.6 GHz, 30 GHz or 40 GHz Frequency range
• 40 MHz real-time analysis bandwidth
• Spectrum with persistence function
• Spectrogram display
• Display of power versus time
• Triggering on frequency masks

ANALIZOR DE SPECTRU PORTABIL 9 KHZ..8 GHZ ROHDE & SCHWARZ FSH8

• 9 kHz to 8 GHz Frequency range
• 100 Hz to 3 MHz RBW
• <-141dBm sensitivity, with preamp <-161 dBm

R&S HMC804X POWER SUPPLY

• High energy efficiency, low heat dissipation and quiet fans
• Low residual ripple due to linear postregulation
• Convenient parallel and serial operation via V/I tracking

ANALIZOR DE SPECTRU 9 KHZ..3 GHZ / 6 GHZ ROHDE & SCHWARZ FSC

• 9 kHz to 3 GHz or 6 GHz Frequency range
• 10 Hz to 3 MHz RBW
• High sensitivity

GENERATOR SEMNAL RF 9 KHZ..1.1 GHZ/ 2.2 GHZ/ 3.2 GHZ/ 6 GHZ/ 12.75 GHZ ROHDE & SCHWARZ SMB100A

• 9 kHz to 1.1 GHz, 2.2 GHz, 3.2 GHz or 6 GHz Frequency ranges
• 100 kHz to 12.75 GHz Frequency ranges(B112 option)
• >+18 dBm RF output level from 1 MHz to 6 GHz (+25 dBm over range)
• -128 dBc/Hz SSB phase noise typ(1 GHz/20 kHz offset)