Trusa complexa pentru verificarea releelor de protectie Megger FREJA 400

Cod: Megger FREJA 400 403 406 409 Programma FREJA400


 

Brosura produs PDF, 2.12 Mb
           

Descriere

• FREJA 403 3x60 A at 300 VA per phase.

• FREJA 406 Up to 6 channels: 3 x 60 A and 3 x 15 A

• FREJA 409 Up to 9 channels: 6 x 60 A and 3 x 15 A

• Voltage outputs : Up to four channels 300 V at 150 VA

• Fully automated testing using FREJA Win software
• PC operated or stand alone using the intuitive graphic touch screen
• High current, high power output (60 A / 300 VArms) per phase
• FREJA 409 provides 3 x 120 A in threephase configuration mode
• FREJA 406 provides 6 currents, and FREJA 409 provides 9 currents for transformer differential testing
• IEC 61850 test capabilities

 

The FREJA 400-series is a new member of the relay testing equipment from Megger, quick and easy to use. The rugged hardware design is built for field use over a wide temperature range, with the possibilities of intelligent software to perform rapid testing.
The instruments have the "smart" combination of high compliance voltage and high current to test all electromechanical, solid-state and numerical-based overcurrent relays, including voltage controlled, voltage restraint and directional overcurrent.
With three current generators and four voltage generators the instruments provides a complete three-phase test system for commissioning of three phase protection systems. The FREJA 406 can provide 6 current generation and FREJA 409 can provide 9 current generation by converting the voltage channels to currents. The generators also provide high power in both the voltage and current channels to test virtually all types of protection relays.

 

Accesorii standard

FREJA 403 Standalone

Excl. FREJA Win, excl. soft case, excl. test leads CF-39000

 

FREJA 403 (with soft case)

Incl. FREJA Win, soft case, test leads (GA-00033) CF-39090

 

FREJA 403 (with flightcase)

Incl. FREJA Win, flightcase, test leads (GA-00033) CF-39091

 

FREJA 406 Standalone

Excl. FREJA Win, excl. soft case, excl. test leads CF-49000

 

FREJA 406 (with soft case)

Incl. FREJA Win, soft case, test leads (GA-00033) CF-49090

 

FREJA 406 (with flightcase)

Incl. FREJA Win, flightcase, test leads (GA-00033) CF-49091

 

FREJA 409 Standalone

Excl. FREJA Win, excl. soft case, excl. test leads CF-59000

 

FREJA 409 (with soft case)

Incl. FREJA Win, soft case, 2x test leads (GA-00033) CF-59090

 

FREJA 409 (with flightcase)

Incl. FREJA Win, flightcase, 2x test leads (GA-00033) CF-59091

 

Optiuni recomandate

Optional

FREJA Win

Software CF-8203X

FREJA Win upgrade CF-8282X

MGC IEC 61850 Megger GOOSE configuration software CF-8401X

 

Optional accessories

Multicable GA-00105

Flight case GD-00265

Soft case GD-00315

 

Test lead set

With touch-proof contacts.

4 x 0.25 m (0.8 ft) / 2.5 mm2

2 x 0.5 m (1.6 ft) / 2.5 mm2

10 x 2 m (6.5 ft) / 2.5 mm2

Weight: 1 kg (2.2 lbs). GA-00033

 

GPS200 - MGTR

The GPS receiver GPS200 - MGTR makes it possible

to synchronize two or more FREJA to conduct endto-

end testing. End-to-end testing provides quick,

reliable results showing how two or more protection

relay systems interact. The unit comes with a 15 m

(50 ft) cable and an allweather antenna. Longer

cables can be ordered. CF-90150

 

Cable organizer

Velcro straps, 10 pcs. AA-00100

 

Alte produse MEGGER

PUNTE PENTRU MASURAT TANGENTA UNGHIULUI DE PIERDERI DIELECTRICE MEGGER DELTA4000

• fully automatic 12 kV insulation power factor / dissipation factor (tan delta) test set
• Voltage: 25 V to 12 kV, 1 V resolution
• Current : 0 to 5 Amps, 0.1 µA maximum resolution
• Capacitance: 0 to 100 µF, 0.01 pF maximum resolution
• Inductance: 6 H to 10 MH, 0.1 mH maximum resolution
• Power factor PF : 0-100% (0-1), 0.001% maximum resolution
• Dissipation factor DF : 0-100 (0-10,000%), 0.001% maximum resolution
• Watt Loss: 0 to 2 kW
• Automatic and manual operation
• Accurate and repeatable measurement results with high noise suppression
• Lightweight, rugged two-piece design

 

STATIC / DYNAMIC RESISTANCE MEASUREMENT ACCESSORY FOR TM SERIES MEGGER - SDRM202

• Enables resistance measurement on circuit breakers
• Small and light weight
• A number of operations can be run with short waiting intervals

 

TESTER UNIVERSAL ELECTRICIAN INSTALATII MEGGER MFT1800 MFT1825 MFT1815

• Testarea RCD de tip B şi a RCD trifazate pentru aplicaţii industriale fără împământare
• Testarea buclei fără declanșare cu două şi trei fire pentru circuite protejate de RCD
• Opţiuni de teste cu 3 poli, 3 poli cu tehnica tijei atașate, 2 poli şi fără ţăruşi pentru măsurarea rezistenţei electrodului de împământare
• Selecţie simplă a testelor codificate prin culori şi afișaj mare, clar, iluminat din spate pentru ușurinţă în utilizare
• Test de continuitate cu inversare automată a curenţilor de testare de 200 mA şi 15 mA la alegere

 

CIRCUIT BREAKER TEST SET MEGGER ½ CB-845

• Digital memory ammeter
• Digital, multirange timer
• Lightweight and portable
• High-current output
• Solid-state output initiate circuitry

 

SARCINA TESTARE DESCARCARE BATERII UPS-URI MEGGER TORKEL-840 TORKEL-860 BS-49094 BS-49096

• used for battery systems ranging from 12 to 250 V
• Batteries can be tested "in service"
• Unit adjusts to include load currents in the test parameters
• User adjustable alarm and shutdown points to avoid excessive discharge
• Easily expandable for larger battery banks using TXL extra load units (option)
• Computerized test operation using TorkelWin software (option)

 

CURRENT SUPPLY UNIT MEGGER ½ CSU600A AND CSU600AT

• Compact and rugged
• Quick and easy to us
• Broad application range
• Excellent weight/performance ratio

 

ELECTRICIAN'S MULTIMETER MEGGER - AVO410

• 6000 count backlit digital display
• True RMS reading on a.c. mode
• 1000 V d.c. / 750 V a.c. ranges
• 10 A a.c. / d.c. ranges

 

MICROMMETRU PORTABIL 2A MEGGER DLRO2X

• DLRO2X este un ohmmetru robust de 2 A cu rezistență redusă
• conceput pentru măsurători precise și fiabile
• diverse aplicații, inclusiv în sectoarele industrial, feroviar și avionic

 

MEGGER - MS2A CIRCUIT BREAKER AND OVERCURRENT RELAY TEST SET

• Light Weight, Portable Primary Injection Test Instrument
• Overcurrent Relay Testing
• Ground Fault Performance Testing for NEC 230.95
• Circuit Breaker Testing

 

TESTER TDR LOCALIZARE DEFECTE CABLURI MEGGER TDR1000/3

• minimum resolution of 0.1 m and a 5 km maximum range
• Simple operation.
• AUTO set up for instant use.
• Ultra fast pulse for near end fault identification.
• Trace HOLD feature to allow comparison between cables.
• IP54 rating offers real life working.
• Designed for use on all metallic cable pairs.