GOODWILL INSTEK PEL-3000 Series

Cod: GOODWILL INSTEK PEL-3000 Series


 

Brosura produs PDF, 1.09 Mb
             

Descriere

The PEL-3000 series, a single-channel, programmable D.C. electronic load with 0.01mA current resolution and 16A/½s current Slew Rate, is very ideal for testing server power supply and SPS (Switching Power Supply) for commercial and industrial computers. For a heavy-duty device like cloud ecosystem running 24-hour nonstop operations, a stable and high-power power supply, ranging from 175W to 1050W, is required to maintain the normal operation of server, Hub, and the equipment of data storage and internet communications. Owing to the increasing demand of data transmission and large scale data storage of telecommunications systems, the infrastructure of internet communications is in the pace of rapid expansion. This has greatly boosted the market demand of telecommunications equipment powered by power supply of 2000W and above. The flexible power combination of PEL-3000 meets the test requirements of present high-power power supply.

 

Features:

  • Operating voltage (DC):1.5V~150V
  • Operating Mode : C.C / C.V / C.R / C.P / CC+CV / CR+CV / CP+CV
  • Parallel Connection of Inputs for Higher Capacity (Max : 9,450W)
  • Support of High Slew Rate:Max 16A/us
  • Run Program Function(GO/NO GO Test)
  • Sequence Function for High Efficient Load Simulations
  • Commands are compatible with Kikusui PLZ-4W model.
  • Dynamic(Switching) Function:0.0166Hz ~20kHz
  • Soft Start Function:Off / On(1~200ms, Res:1ms)
  • Adjustable OCP / OVP / OPP / UVP Setting
  • Short Circuit Function
  • Timer function : Elapsed Time of load on
  • Cut Off Time(Auto Load Off Timer ):1s to 999h 59min 59s or Off
  • External Channel Control / Monitoring via Analog Control Connector
  • Setup Memories:100 sets
  • 3.5 Inch TFT LCD Display
  • Multi Interface : USB 2.0 Device / Host , RS-232 , GPIB (Optional)
 

Alte produse INSTEK

GOODWILL INSTEK PSS-SERIES

• High Resolution 10mV, 1mA
• High Stability, Low Drift
• Over-Voltage, Over-Current, Over Temperature Protection
• Intelligent Fan Control (Changes by Output Power)

 

OSCILOSCOP ANALOGIC 2 X 50 MHZ GW INSTEK GOS-6051

• 50 MHz bandwidth
• 2 analog channels
• 1mV/div ~ 20V/div
• Cursor Measurement, 6 Digit Frequency Counter, 10 sets Memory for Front Panel Setting Save & Recall

 

GOODWILL INSTEK GPR-M SERIES

• Constant Voltage and Constant Current Operation
• Internal Select for Continuous or Dynamic Load
• Low Ripple and Noise
• Overload and Reverse Polarity Protection

 

OSCILOSCOP DIGITAL 2 CANALE 70/100/150MHZ INSTEK GDS-1000A-U

• 150/100/70MHz Bandwidths
• 1GSa/s Real-Time Sample Rates Maximum, 25GSa/s Equivalent-Time
• 2Mega Points Record Length
• 2mV~10V Vertical Scale
• 1ns~50s Horizontal Range
• Up to 27 Automatic Measurements
• 5.7" TFT LCD Display
• USB Host and Device Interface Supported
• Go/NoGo Function
• Data Logger

 

GOODWILL INSTEK PSB-2000 SERIES

• Output Voltage Rating : 80V/800V
• Output Power Rating : 400W~800W
• Constant Power Output for Multi-Range(V&I)Operation
• Series and Parallel Operation(2 Units in Series or 4 Units in parallel Maximum)

 

GOODWILL INSTEK PPE-3323

• 50 Sets memory
• Self test and software calibration
• Meets UL, CSA, IEC safety regulation
• Auto step running with timer setting

 

GOODWILL INSTEK AFG-303X SERIES

• Input/output signal ground independent of housing and signal ground between channels also insulated.
• Synchronized phase operates up to 6 units and 12 channels
• Pulse waveform parameters can be set independently for more precise timing
• Harmonic signal generator

 

GOODWILL INSTEK GPM-8212

• Simultaneous Display of W, A, V ( PF or Hz )
• True RMS V, A, W
• Auto Calibration Via Computer
• Max. / Min. / Hold Function
• High Immunity to External Noise

 

GOODWILL INSTEK GUT-6000B

• Loop Test
• Auto-Search
• Self-Diagnosis
• Over-Load Protection

 

GOODWILL INSTEK GPM-8213

• Two data display modes
• Standard : two major measurement items + six secondary measurement items
• Simple : displaying test data of four different measurement items
• Met the requirement of IEC 62301 power measurement
• Voltage/ current test frequency bandwidth : DC~6kHz