Is the resolution of your current mulitmeter inadequate to read the smallest signal? Need an easy to use multimeter with data-logging? Take a look at the GoodWill GDM-8255A series 5 1/2 digit dual-display digital multimeter. It features a DC voltage accuracy of 0.012% with an industry-leading response time. With robust hardware and software the GDM-825xA series will save time on debugging and analysis whilst saving you money.

The GDM-8255A carries an extensive list of standard measurement items with a dual-display allowing two measurement items to be displayed simultaneously. Advanced measurement functions, such as Max/Min, Hold, Relative value and Compare, are suitable for a multiplicity of applications such as production testing, research and field verification. The USB, RS-232C and 9-pin digital I/O interface are included as standard features for romte control and data capturing for ATE.

For convenient PC-based remote control and extensive data capture, the GDM-8255A includes DMM-Viewer software at no additional cost. DMM-Viewer mimics the operation of the multimeters on the PC, allowing you to quickly use the software with little effort.

The optional scanner card (GDM-SC1), creates a self-contained multipoint measurement solution with plug-in design. This approach eliminates the complexities of multipoint measurements and data processing. The scanner lets users effectively measure multiple channels connected to a single GDM-8255A.

Features:

GDM-8255A 199,999 Counts Display
VFD Two Colors Display
0.012% DCV Accuracy
True RMS (AC, AC+DC)
9 Major Measuring Functions and 10 Advanced Measurement Functions
2W/4W Resistance Measurement
High Voltage 1000V and 10A Current Range
Standard Interface : RS-232C, USB Device, Digital I/O
Free PC Software (DMM-VIEWER), LabVIEW Driver
Optional: 16+2 Channels Scanner Card

Alte produse GW INSTEK

GOODWILL INSTEK GPT-9900 SERIES

• Function Key for quick selection
• High intensity flash for caution & Status indication
• Safety INTERLOCK function
• Zero Crossing Turn-on Operation
• Controllable Ramp-up Time

GOODWILL INSTEK GPR-H SERIES

• 0.01% High Regulation
• Constant Voltage and Constant Current Operation
• Internal Select for Continuous or Dynamic Load
• Low Ripple and Noise

GOODWILL INSTEK MFG-2000 SERIES

• Earth Ground Isolation Design Among I/O Terminals and Instrument Chassis
• Frequency Counter : 150MHz, 8 bits
• AM/FM/PM/ASK/FSK/PSK/SUM/PWM Modulation
• USB Host/USB Device/LAN (MFG-22XX only)
• 4.3 Inch TFT Color Display

TESTER RIGIDITATE DIELECTRICA GW-INSTEK GPT-9901A GPT-9902A GPT-9903 GPT-9904

• 500VA AC Test Capacity
• 240x64 Ice Blue Dot matrix LCD
• Sweep Function for DUT characteristic analysis
• Insulation resistance measurement up to 50GO(GPT-9903/9904)
• Manual/Auto Mode
• Interface : RS-232C, USB device, Signal I/O and GPIB (optional)

GOODWILL INSTEK GCM-403 & GCM-407

• Auto Range, Expect Current Measurement
• Auto Power Off
• Max Hold
• True RMS Measurement (GCM-407)

TRUSA MASURA CURENT DE ATINGERE GW-INSTEK GLC-9000

• Touch Panel with Color LCD Display
• 9 Different Measurement Network to Simulate
• the Resistance of Human Body
• 8 Different Types of Leakage current for Medical
• & General Electrical Equipment
• Various Leakage Current Measuring Mode:DC/AC/AC+DC/AC Peak
• Upper & Lower Limitation for PASS/FAIL Judgment
• Meter Mode with SELV/CONV Function
• 50 Preset Test Conditions Conform to IEC 60990;
• 30 Sets Memories for Customer Defined
• Various Standard Interfaces RS232/GPIB/USB Host & Device/EXT I/O

GOODWILL INSTEK GOM-801H

• 3 1/2 Digits 0.5" LED Display
• Measures from 20mO ~ 20kO in 7 Ranges
• 1A High Test Current
• High Resolution 10uO
• Hi/Lo Comparator Indicator and Buzz Alarm

OSCILOSCOP ANALOGIC 2 X 30 MHZ GW INSTEK GOS-6031

• 30 MHz bandwidth
• 2 analog channels
• 1mV/div ~ 20V/div
• Cursor Measurement, 6 Digit Frequency Counter, 10 sets Memory for Front Panel Setting Save & Recall

GOODWILL INSTEK GAG-810 & GAG-809

• Frequency from 10Hz ~ 1MHz
• 0.02% Low Sine Wave Distortion (GAG-810 Only)
• 6 Steps Output Attenuator
• EXT SYNC Function

GOODWILL INSTEK GPC-SERIES

• Auto Series and Parallel Operation
• Constant Voltage and Constant Current Operation
• Low Ripple and Noise
• Internal Select for Continuous or Dynamic Load