Featuring the newest generation of electrochemical sensors, the CO-220 responds very quickly to ambient changes in carbon monoxide concentration without the use of a pump.

The CO-220 is the perfect instrument for technicians and other professionals who need to measure CO levels within spaces such as industrial environments, commercial buildings, or residential dwellings where accumulation of combustion gas is possible.

Range: 0 to 1000 ppm

Resolution: 1 ppm

Accuracy: 5%

Rugged case and electronics.
Large LCD displays CO levels from 0 to 1000 ppm.
Bright back-light allows easy screen viewing under dim lighting conditions.
Beeper triggers with increasing frequency as CO levels rise.
MAX Hold function stores and displays the maximum CO level.
Automatic sensor zeroing and self-test sequence upon start-up.
CO level beeper can be silenced if desired.
Automatic power-off after 20 minutes extends battery life.
Easy to replace battery.
Replaceable sensor extends tool life.
C50 soft carrying case, battery and instruction sheet.
Stabilized electrochemical CO specific sensor.
Typical three year sensor life; one year calibration cycle.
Battery life typical 500 hours with alkaline battery.

Optiuni recomandate

CO-205 CO-205 Aspirator Kit

Alte produse FLUKE

CALIBRATOR MULTIFUNCTIONAL DE PROCES FLUKE 753

• Measure volts, mA, RTDs, thermocouples, frequency
• ohms to test sensors, transmitters and other instruments
• Source/simulate volts, mA, thermocouples, RTDs, frequency, ohms, and pressure
• Power transmitters during test using loop supply with simultaneous mA measurement

CALIBRATOR DE PRESIUNE FLUKE 717

• Measure pressure, 0.05% of full scale
• Measure mA with 0.015% accuracy and 0.001 mA resolution
• Measure pressure to 10,000 psi/700 bar

CLESTE AMPERMETRIC CURENT TRUE-RMS 400A FLUKE 324

• 400 A ac current measurement
• 600 V ac and dc voltage measurement
• True-rms ac voltage and current for accurate measurements on non-linear signals
• Resistance measurement up to 40 k? with continuity detection
• Temperature and capacitance measurement

ANALIZATOR PORTABIL DE CALITATE ENERGIE ELECTRICA FLUKE 435 II

• Power inverter efficiency: Simultaneously measure AC output power and DC input power
• PowerWave data capture: Capture fast RMS data, show half-cycle and waveforms
• Energy loss calculator
• Troubleshoot real-time
• Highest safety rating in the industry
• Measure all three phases and neutral

RLC-METRU 50 HZ..100 KHZ FLUKE 6304/ 6304C

• 50, 60, 100, 120 Hz, 200 Hz to 20 kHz (100 Hz steps), 100 kHz test frequencies
• 0.1 % basic accuracy (0.05 % for PM 6304C)
• Easy to use, at-a-glance display

CALIBRATOR MULTIFUNCTIONAL DE PROCES FLUKE 743B

• 0 to 300 V DC/AC Voltage measure
• 0 to 15 V DC Voltage source / simulate
• 0 to 110 mA DC Current measure
• 0 to 22 mA DC Current source / simulate
• 0 to 11 kO Resistance measure / source / simulate
• 1 to 50 kHz Frequency measure / source / simulate
• PC interface and data logging

FLUKE TIX560 CAMERA DE TERMOVIZIUNE 320X240

• Fluke TiX500 320x240 pixels, -20 °C..+650 °C
• Fluke TiX520 320x240 pixels, -20 °C..+850 °C
• Fluke TiX560 320x240 pixels, -20 °C..+1200 °C

TESTER INSTALATII ELECTRICE 50V-1000V FLUKE 1654B

• Test voltage: 50V, 100V, 250V, 500V, 1000V
• Two measurements at once and a dual display
• PEFC/PSC and loop impedance
• Fast voltage measurement between L-N, L-PE and N-PE
• PASS/FAIL indication for RCD test results
• Earth resistance

CALIBRATOR TERMOREZISTENTE FLUKE 712B

• measure and simulate (13) different RTD types and resistance
• Measure 4 to 20 mA signals while simultaneously sourcing a temperature signal
• Configurable 0 % and 100 % source settings for quick 25 % linearity checks
• Linear ramp and 25 % step auto ramp based on 0 % and 100 % settings
• Dual inputs and backlit display for easy interpretation of measurements
• Power down settings remembered at power up for easy restart of tests
• 1-year and 2-year specifications and traceable certification of calibration

FLUKE TIS50 CAMERA DE TERMOVIZIUNE 220X165

• Fluke TiS10 80x60 pixels
• Fluke TiS20 120x90 pixels
• Fluke TiS40 160x120 pixels
• Fluke TiS45 160x120 pixels
• Fluke TiS50 220x165 pixels
• Fluke TiS55 220x165 pixels
• Fluke TiS60 260x195 pixels
• Fluke TiS65 260x195 pixels