Measure pressure, 0.05% of full scale with internal sensor up to 5000 PSI/345 bar sensor (5000G model)
Measure mA with 0.015% accuracy and 0.001 mA resolution, while sourcing 24V loop power
Measure pressure to 10,000 psi/700 bar using one of 29 Fluke 700Pxx Pressure Modules
1/8 NPT female pressure fitting
Compatible with non-corrosive Gases and liquids
Select eleven different engineering units
Zero, min, max, and hold functions
Calibrate P/I instruments with simultaneous pressure and current measurement
Pressure switch test function captures set, reset and Deadband values of a pressure switch
Error% calculation of mA measurements for quick pass-fail decisions
Long lasting battery life
Holster features test lead storage
Compatible with Toolpack magnetic hanging system
New switch test

Accesorii standard

Protective Yellow Holster with test lead storage
Instructions Sheet (14 languages)
single 9V alkaline battery
Test Leads and Alligator Clips
NIST- traceable calibration report and data

Optiuni recomandate

Fluke 717 1G	Pressure Calibrator -1 to 1 PSI, (-689 mbar to 689 mbar, -689 to 689 kPa)
Fluke 717 30G	Pressure Calibrator -12 to 30 psi (-850 mbar to 2 bar, -85 to 207 kPa)
Fluke 717 100G	Pressure Calibrator -12 to 100 PSI, (-850 mbar to 7 bar, -85 to 68948 kPa)
Fluke 717 300G	Pressure Calibrator -12 to 300 PSI, (-850 mbar to 20 bar, -85 to 20684 kPa )
Fluke 717 500G	Pressure Calibrator 0 to 500 PSI, (0 mbar to 347 bar, 0 to 34474 kPa )
Fluke 717 1000G	Pressure Calibrator 0 to 1000 PSI, (0 mbar to 69 bar, 0 to 68948 kPa )
Fluke 717 1500G	Pressure Calibrator 0 to 1500 PSI, (0 bar to 1034 bar, 0 to 10342 kPa )
Fluke 717 3000G	Pressure Calibrator 0 to 3000 PSI, (0 bar to 207 bar, 0 to 20684 kPa)
Fluke 717 5000G	Pressure Calibrator 0 to 5000 PSI, (0 bar to 345 bar, 0 to 34474 kPa)

Alte produse FLUKE

TESTER MULTIFUNCTIONAL TEMPERATURA, UMIDITATE, VITEZA AER, CO, CO2 FLUKE 975

• Temperature -20 °C to 50 °C (-5 °F to 122 °F)
• Velocity 0.25 m/sec to 15 m/sec
• Relative Humidity 10 % to 90 % RH, non-condensing
• CO2 0 to 5000 ppm
• CO 0 to 500 ppm

CLESTE AMPERMETRIC CURENT TRUE-RMS 400A FLUKE 324

• 400 A ac current measurement
• 600 V ac and dc voltage measurement
• True-rms ac voltage and current for accurate measurements on non-linear signals
• Resistance measurement up to 40 k? with continuity detection
• Temperature and capacitance measurement

CALIBRATOR DE PRESIUNE FLUKE 719PRO CU POMPA INTEGRATA

• Fluke-719Pro-30G -12 to 30 PSI / -0.8 to 2 bar
• Fluke-719Pro-150G -12 to 150 PSI / -0.8 to 10 bar
• Fluke-719Pro-300G -12 to 300 PSI / -0.8 to 20 bar
• Unique integrated electric pump for one handed pressure calibration
• Pressure measurement from internal or external sensor
• Sourced/simulated or measured mA values
• Temperature measured by optional RTD probe

ANALIZOR DE PUTERE DE PRECIZIE FLUKE NORMA 5000

• 3, 4 or 6 power phases
• Bandwidth from dc to 3 MHz / 10 MHz
• FFT analysis, vector diagram, and Digital Oscilloscope
• Voltage, current and power harmonics measured up to the 40th harmonic

CLESTE AMPERMETRIC DE CURENT TRUE-RMS 600A FLUKE 373

• 600 A AC current measurement with fixed jaw
• 600 V AC and DC voltage measurement
• True-rms ac voltage and current
• 6000 O resistance measurement
• 1000 µF capacitance measurement

DETECTOR PREZENTA TENSIUNE FLUKE LVD1 VOLT LIGHT

• Detects voltages from 40 V AC to 300 V AC
• Non-contact AC voltage detector and LED flashlight
• exclusive dual-sensitivity

ANALIZOR DE PUTERE DE PRECIZIE FLUKE NORMA 4000

• 1 to 3 power phases
• Bandwidth from dc to 3 MHz / 10 MHz
• FFT analysis, vector diagram, and Digital Oscilloscope
• Voltage, current and power harmonics measured up to the 40th harmonic

FLUKE II500 CAMERA ACUSTICA INSPECTIE SI DETECTIE SCAPARI GAZ COMPRIMAT

• Detectare vizuală ușoară, rapidă și sigură a scurgerilor de gaz comprimat.
• Ecranul tactil LCD de 7" afișează o hartă sonoră SoundMap™ peste imagini vizuale, facilitând localizarea rapidă a scurgerilor.
• Interfața intuitivă nu necesită instruire pentru echipele de întreținere.

TESTER TENSIUNE SI CONTINUITATE FLUKE T50

• Voltage test
• Optical and acoustical continuity test
• Display: 10 LED's

CALIBRATOR MULTIFUNCTIONAL DE PROCES FLUKE 744

• 0 to 300 V DC/AC Voltage measure
• 0 to 15 V DC Voltage source / simulate
• 0 to 110 mA DC Current measure
• 0 to 22 mA DC Current source / simulate
• 0 to 11 kO Resistance measure / source / simulate
• 1 to 50 kHz Frequency measure / source / simulate
• PC interface and data logging
• Integrated HART communication