Reliably handle a wide range of high-current applications with 2000 A AC + DC true-rms, 1400 A AC, and 2000 A DC
The large 58 mm (2.3 in) jaw capacity is suitable for large or multiple conductors
High voltage measurement of 1000 V AC + DC true-rms, 600 V AC, and 1000 V DC allows the user to perform multiple tests with only one tool
Resistance to 400 Kohms coupled with a continuity beeper provide the convenience of a multimeter in a clamp meter
CAT IV 600 V, CAT III 1000 V rating for added user protection
In-rush current measurement captures �power-on’ surge current with accuracy and repeatability
Accurately measure frequency up to 1 kHz for optimum troubleshooting
Quickly analyze readings using the MIN, MAX, and AVG functions
A large backlit display allows for easy visibility in low-lit areas
Use the display hold feature to capture readings even when the display cannot be viewed
Use the low-pass filter to smooth out noisy loads and stabilize readings

Accesorii standard

C43 Soft carrying case
6 AA batteries
TL224 1.5 m silicone rubber test leads
TP2 Test Probes
AC285 Alligator Clips
User manual
3 year warranty

Alte produse FLUKE

ANALIZOR REZISTENTA INTERNA BATERII FLUKE BT521

• Masuratori cheie: Rezistenta, tensiunea c.c. si c.a., intensitatea c.a. si c.c., variatia de tensiune ale bateriei, frecventa si temperatura bateriei.
• Analiza îmbunatatita a datelor: Comparati rapid tendinte, analizati rezultate si creati rapoarte cu ajutorul software-ului de gestionare a bateriei.
• Raportare usoara: Generati rapoarte PDF pe software-ul PC cu grafice de analiza si tabeluri de date sau trimiteti formatul raportului prin e-mail cu un fisier csv pe aplicatia mobila.
• Comunicatie wireless
• Port USB

CALIBRATOR DE PRESIUNE FLUKE 719

• Best in class pressure measurement uncertainty of 0.025%
• Measure and source mA with best in class 0.015% accuracy
• 30 PSI and 100 PSI pressure ranges

ANALIZOR DE PUTERE DE PRECIZIE FLUKE NORMA 5000

• 3, 4 or 6 power phases
• Bandwidth from dc to 3 MHz / 10 MHz
• FFT analysis, vector diagram, and Digital Oscilloscope
• Voltage, current and power harmonics measured up to the 40th harmonic

CALIBRATOR TERMOCUPLE FLUKE 714B

• measure and simulate (17) different thermocouple types and millivolts
• Measure 4 to 20 mA signals while simultaneously sourcing a temperature signal
• Configurable 0 % and 100 % source settings for quick 25 % linearity checks
• Linear ramp and 25 % step auto ramp based on 0 % and 100 % settings
• Dual inputs and backlit display for easy interpretation of measurements
• Power down settings remembered at power up for easy restart of tests
• 1-year and 2-year specifications and traceable certification of calibration

ANALIZOR DE VIBRATII FLUKE 810

• On-board identification and location of the most common mechanical faults (bearings, misalignment, unbalance, looseness) focus maintenance efforts on root cause, reducing unplanned downtime
• Fault severity scale with four severity levels helps you prioritize maintenance work
• Repair recommendations advise technicians on corrective action
• On-board context sensitive help provides real-time tips and guidance to new users
• 2 GB expandable on-board memory provides enough space for your machinery’s data

TERMOMETRU INFRAROSU CU TERMOCUPLU DE CONTACT FLUKE 566/ FLUKE 568

• Measure -40 °C to 800 °C /-40 °F to 1472 °F (568) or -40 °C to 650 °C/-40 °F to 1202 °F (566)
• Easily access advanced features with the soft-key buttons and dot-matrix display
• Measure smaller objects from further away, with a distance-to-spot ratio of 50:1 (568) or 30:1 (566)
• Compatibility with all standard miniconnector Type-K thermocouples allow you to preserve your thermocouple investments

CALIBRATOR MULTIFUNCTIONAL DE PROCES FLUKE 743B

• 0 to 300 V DC/AC Voltage measure
• 0 to 15 V DC Voltage source / simulate
• 0 to 110 mA DC Current measure
• 0 to 22 mA DC Current source / simulate
• 0 to 11 kO Resistance measure / source / simulate
• 1 to 50 kHz Frequency measure / source / simulate
• PC interface and data logging

POMPA HIDRAULICA CALIBRARE PRESIUNI FLUKE 700HTP-2

• hand operated hydraulic pressure pump
• designed to generate calibration pressures up to 10,000 psi/690 bar
• Variable size stroke adjustment, allows the user to vary the volume and pressure per stroke
• Integral pressure adjustment vernier knob for fine pressure adjustment
• Directly connection to pressure modules consolidates two separate pieces into one when performing pressure calibration and testing
• Two ¼ inch NPT pressure ports, one for reference (pressure module or gauge), one for UUT
• Improved priming
• Improved stroke limiting mechanism

MEGOHMETRU DIGITAL REZISTENTA IZOLATIE 250V/ 10KV FLUKE 1555

• Resistance Test range: 2 TO
• Test voltage: 10 kV

FLUKE 123B 123B/S SCOPEMETER OSCILOSCOP PORTABIL 2X20MHZ

• 2-canale 20MHz
• Osciloscop digital cu intrare dublă şi multimetru
• Lătime de bandă a osciloscopului de 40 MHz sau 20 MHz
• Două multimetre digitale true-RMS cu limită de numărare de impulsuri 5000
• Măsurarea energiei (W, VA, VAR, PF, DPF, Hz)
• Tensiune, curent şi armonice de energie
• Adaptor WiFi optional conectat la port USB intern pentru transfer wireless de informatii către PC, laptop sau aplicatia mobilă Fluke Connect�®*1