Extech 407730 Sonometru digital

• Single phase, 3-phase/3-wire or 3-phase/4-wire systems
• Large backlighting LCD displays 35 parameters simultaneously (MW, kVAR, MVA, PF plus the voltage and current of the 3 phases)
• Displays Active Power (kW), Apparent Power (kVA), Reactive Power (kVAR) and Power Factor
• Current measurements to 1200A and Voltage measurements to 600V

 

• 7 ranges for wide low resistance measurements
• High resolution to 0.01mOhm
• 1999 count display with 0.8" digits
• 4-wire test cable with Kelvin clip connectors
• Automatic zero
• Built-in comparator for Hi/Lo/Go resistance testing or selection

 

• Non-invasive moisture content measurements in wood/building materials
• Measures relative moisture of various building materials including wood, particle board, carpeting, and ceiling tiles using non-invasive Pinless Technology
• Multifunction backlit triple LCD display
• Pinless measurement depth from 0.78" (20mm) to 1.6" (40mm) below the surface
• High frequency sensing technology

 

• Measure True RMS AC Voltage (600V) or Current (200A)
• Readings can be downloaded to your PC via the USB interface and analyzed using the included software or exported to a spreadsheet
• LCD indicates time/date, current readings and Min/Max
• Normal, Peak and Capture (user-specified trigger level) recording modes

 

• 8mm diameter camera head with 4 built-in bright LED lamps for dimly lit areas
• Handheld design for quick, easy, on-the-spot viewing in small openings
• Completely submersible in water down to 1 meter for 1 hour
• Non-detachable waterproof 39" (1m) flexible gooseneck cable retains configured shape
• 2.7" (68mm) color TFT LCD monitor for detailed images

 

• One relay output
• Dual 4-digit LED displays of process and setpoint values
• User friendly menus and tactile keypad for easy programming
• One-touch autotuning for quick setup & precise control
• Fuzzy Logic PID offers intuitive control simulating human control logic

 

• Dual LCD simultaneously displays Carbon Monoxide (CO) level and maximum CO reading taken from when the meter was powered on
• Long life electrochemical sensor
• Adjustable CO warning level at 25, 30, 35, 45, 50, 70, 100 and 200ppm (alarm is preset to 25ppm)
• Audible alarm when CO level reaches the warning set point level
• Choose from 3 calibration points: 0 (preset), 100, and 500ppm

 

• Range: 44 lbs, 20kg, 196 Newtons (±0.5% accuracy)
• Ideal for a wide variety of applications in the electronics, automotive, chemical, plastics and machinery industries
• Reversible display and fast/slow response mode
• Exclusive load cell measurement transducer

 

• Simultaneously measure and display 6 channels of particle sizes (down to 0.3µm), Air Temperature, Humidity, Dew Point and Wet Bulb
• 2.8" TFT Color LCD display
• Built-in 320x240-pixel camera takes videos (3GP) and photo images (JPEG) and records them in internal 74MB memory
• Store 5000 records (date, time, counts, humidity, temperature, sample volumes, and location label) and 20 minutes of video
• Selectable sample time, count data, and programmable delay
• Max, Min, DIF, AVG record, Date/time setup controls, Auto Power Off

 

• Backlit LCD displays TVOC (Total Volatile Organic Compound) and HCHO (Formaldehyde) concentrations simultaneously in real-time
• Built-in fast response, high accuracy fuel cell Formaldehyde sensor
• Two selectable units of measure (ppm, mg/m3)
• Adjustable audible and visible high/low alarms
• Auto Power Off
• Complete with rechargeable battery and Universal AC Adaptor/Charger (multi-plugs US, EU, UK, and AU)