MO265 is a Combination Pin/Pinless Moisture Meter which measures Relative Moisture in wood and other building materials using pinless technology plus % of Moisture in sheetrock and other materials using direct pin method. Measurements are displayed on a digital LCD with backlighting and a tri-color LED bargraph. Pinless non-invasive measurement depth to 0.75 in. (22mm) below the surface. In addition, a remote pin probe is included to measure moisture in difficult to access places. Complete with 9-Volt battery, replacement pins, remote pin probe, protective cap, and pouch case.

Features:

Choice of measuring moisture in wood and other building materials with pinless technology or use traditional remote pin probe (included)
%WME (wood moisture equivalent) pin moisture reading
Relative pinless moisture reading for non-invasive measurement
Digital LCD readout with backlighting feature and tri-color LED bargraph
Quickly indicates the moisture content of materials
Pinless measurement depth to 0.75" (22mm) below the surface
Electro-magnetic sensing technology
Built-in calibration check
Replaceable measurement electrode pins
Includes remote pin probe to measure moisture in difficult to access areas
Complete with 9V battery, remote pin probe, replacement pins, protective cap, and hard carrying case

Alte produse EXTECH

EXTECH LT40 LUXMETRU

• Measure white LED and Standard Lighting in Lux or Foot-Candle (Fc) units
• Built-in sensor with protective cover
• 4000 count LCD display
• Cosine and color corrected measurements
• Min/Max Average and Auto Power Off
• Complete with 2 AAA batteries, and pouch

EXTECH 380460 PRECISION MILLIOHM METER (110V)

• High accuracy and performance for low resistance measurements
• Large 0.7" (18mm) LCD 1999 count
• 4-wire cables with Kelvin clip connectors
• Manual zero display adjust
• Overrange indication
• Compact, durable field service housing with protective cover

EXTECH MA3018 CLESTE DE CURENT CORDON FLEXIBIL 3000A TRUE RMS AC

• Measure AC Current up to 3000A
• True RMS for accurate readings of noisy, distorted or non-sinusoidal waveforms
• Flexible 18" (45.7cm) clamp jaw easily wraps around bus bars and cable bundles
• 7.5mm cable diameter fits into tight spaces and around large conductors
• Measures AC Current in three ranges
• 3000 count backlit LCD display

EXTECH EMF300 TESTER SCAPARI MICORUNDE

• Ideal for measuring high frequency radiation levels emitted from household and commercial microwave ovens
• 0 to 1.999mW/cm² measurement range
• Audible alarm and overrange indicator
• Peak Hold
• Complete with 9V battery

EXTECH MN47 MULTIMETRU COMPACT CU 12 FUNCTII

• Built-in Non-contact Voltage Detector (from 100 to 600VAC)
• AC/DC Voltage, AC/DC Current, Resistance, Capacitance, Frequency, Type-K Temperature, Duty Cycle, Continuity / Diode
• Autoranging with manual override
• 4000 count high-contrast LCD display

EXTECH EX410A MULTIMETRU PROFESIONAL CU 8 FUNCTII

• Averaging DMM with 8 functions and 0.5% basic accuracy
• AC/DC Voltage & Current, Resistance, Temperature, Diode/Continuity
• Input fuse protection and mis-connection warning
• 10A max Current

EXTECH EX530 MULTIMETRU DIGITAL PORTABIL INDUSTRIAL

• True RMS DMM with 11 functions and 0.06% basic accuracy
• AC/DC Voltage & Current, Resistance, Capacitance, Frequency, Temperature, Duty Cycle, Diode/Continuity
• Dual sensitivity frequency functions (electrical/electronic)
• 1000V input protection on all functions
• 20A max Current

EXTECH TG20 TRASATOR FIRE SI CABLURI CU GENERATOR SI RECEPTOR

• Transmitter with output cables terminated in modular RJ11 phone connector
• Transmitter injects traceable signal into cables, checks telephone lines, and performs continuity checks
• Non-Contact probe audibly identifies selected wire or cable
• Easily trace wires from source to termination
• Test for properly operating phone lines

DINAMOMETRU MASURARE FORTA CU DATALOGGING EXTECH 475040-SD

• Features 5000g, 176 oz. and 49 Newtons measurement capacity
• Large dual backlit LCD with reversible display feature to match viewing angle
• Record data on SD card
• Updates reading every 0.2 seconds and sample rate is 1 second to 9 hours
• Integrated load cell measurement transducer

EXTECH 480400 TESTER SECVENTA FAZE

• Checks phase sequence and phase status
• Tests up to 600VAC and displays graphical phase orientation on the large LCD
• Double molded durable housing
• Easy to use alligator clips with wide jaws