Boreoscop inspectii video Extech BR300

• True RMS measurements for accurate AC Voltage and Current measurements
• AC/DC Voltage & Current, Resistance, Capacitance, Frequency (electrical/electronic), Temperature, Duty Cycle, Diode/Continuity
• Double molded for waterproof (IP67) protection, CAT IV-600V safety rating for industrial applications
• Data Acquisition Mode for real time data transmission directly to your PC
• 1000V input protection on all functions

 

• Displays moisture level in wood and building materials such as wall board, sheet rock, cardboard, plaster, concrete, and mortar
• Pinless moisture measurement depth to <1" (25mm)
• Audible Alert - Tone rate beeps faster as the moisture level increases
• Icons display low, medium and high levels of moisture content
• Easy-to-use, compact-sized design

 

• Built-in multiparameter sensors measure Air Velocity, Heat Index, Wet Bulb Globe Temperature (WBGT), Humidity, Ambient Temperature, Dew Point, Wet Bulb, Temperature, and Windchill
• MIn/Max/Average (5sec/10sec/13sec)
• Data Hold, Auto Power Off with disable
• Replaceable Mini impeller (vane)
• Complete with CR2032 battery

 

• Utilizes Hall effect sensor with ATC (Automatic Temperature Compensation)
• Adjustable data sampling rate: 1 to 3600 seconds
• Memory stores 99 readings manually
• Datalogging feature records readings with date and time stamp on an SD card (included) in Excel® format
• N pole/S pole indicator

 

• Quickly indicates the moisture content of materials with Pinless technology without damaging the surface
• Remote Pin-type probe (MO290-P included) allows for contact moisture readings (3ft/0.9m cable length)
• Manually store/recall up to 20 labeled readings
• Works on multiple wood types and other building materials
• Easy to read, large dual display with automatic backlight feature

 

• Combines non-contact voltage and light detection with RF (Radio Frequency) transmission technology
• Remotely identifies mid-run AC wiring, circuit breakers, switched lines, AC outlets, and light fixtures
• Non-contact mid-run AC wiring identification without cutting into wires
• Lighting circuit identification using built-in light sensor

 

• Provides 1.5dB accuracy
• Meets ANSI and IEC 651 Type 2 standards
• Two measuring ranges: 35 to 90dB (Low) and 75 to 130dB (High)
• Max Hold with reset button
• Built-in calibration check (94dB)

 

• Measure EMF/ELF levels in milliGauss (mG) or microTesla (µT) up to 2000mG (200µT) with two ranges to choose from
• Built-in single axis sensor provides basic accuracy reading of ±5%
• 30 to 300Hz bandwidth
• Backlit display to view in dimly lit areas
• Data Hold and Min/Max functions

 

• 9mm diameter camera head
• 39" (1m) flexible gooseneck cable retains configured shape
• High resolution
• mini waterproof (IP67) camera head
• four built-in bright LED lamps and dimmer function
• Display detaches for easy storage

 

• Large easy to read digital display
• AC/DC Voltage, DC Current, Resistance, Type K Temperature, Continuity/Diode
• 1.5V and 9V Battery test function
• Convenient mini size with protective rubber holster and tilt stand
• Data Hold locks reading in the display
• Includes protective rubber holster, 9V battery, bead wire Type K temp. probe and test leads