The GOLIATH is perfectly suited for use in a troubleshooting service. In addition to the typical application of a reported odour of gas, a large proportion of uses are based on the statement �no gas present’. In such case, the fitter will have to determine the cause and has been informed of the pressure measurement in the gas installation. The GOLIATH is perfectly suited to this task as well, with its measurement range of 0 to 2,000 hPa (optional pressure sensor).

Measuring carbon monoxide concentrations in addition to monitoring flammable gases is a time-tested practice at many gas supply companies. For this reason, the �Building inspection’ application also indicates the CO concentration and triggers an alarm if it exceeds 10 ppm. This keeps the operator informed of potential problems with the exhaust gas routing.

Features:

Time-tested Esders operation concept.
Very quick initial break-in phase after being switching on or changing application.
Extremely short reaction times when measuring CH4 and CO2 in all concentrations.
Oxygen and up to 3 toxic gas sensors are available as an option.
Ethane analysis with automatic measurement result assessment can be integrated.
Optional pressure measuring up to 2,000 hPa.

Alte produse ESDERS

ESDERS VIBRAGAS EX TESTER GAZ U CERTIFICARE EX

• Easy replacement of batteries with innovative battery Management
• Systematic evaluation of the measured data using Esders PC-1 software
• Graphical printout on site on mobile printer
• Simple operation with intuitive menu navigation
• Practical accessories for all applications

ESDERS LECKOMIO EX DETECTOR SCURGERE GAZ

• Extremely rugged hand-held measurement device as an individual or combination instrument in aluminium casing with very-well protected LCD display
• Easy operation through menu technology and function keys guarantees problem-free use.
• Document tests by printing them on the thermal-printer through the IR interface
• Practice-orientated accessories for all applications

ESDERS HUNTER DETECTOR SI ANALIZOR SCAPARI DE GAZE

• Cast carpet mat free from the material wear common in deep drawn mats
• Stabilising mould elements enable optimal fit on the ground and enable the carpet to be pulled backwards
• Comprehensive flow channels for sampling

ESDERS VACUUM-PROBES-SYSTEM VSS 15

• Complete with connection cable and metal plug
• Stainless steel design with coarse filter and integrated water barrier
• Complete with connection cable and metal bush

ESDERS GAS STANDPIPE - SISTEM TESTARE TEAVA DE EVACUARE GAZE

• Practical system with wide application
• Easy adaptation to many thread sizes, drilling saddles and fittings -directly or via electrically conductive tube
• Rapid extraction of gas by using the Venturi nozzle
• Flame arrestor for burning off the gas safely

ESDERS GOLIATH ANALIZOR DE GAZE

• Time-tested Esders operation concept.
• Very quick initial break-in phase after being switching on or changing application.
• Extremely short reaction times when measuring CH4 and CO2 in all concentrations.
• Oxygen and up to 3 toxic gas sensors are available as an option.
• Ethane analysis with automatic measurement result assessment can be integrated.
• Optional pressure measuring up to 2,000 hPa.

ESDERS GASTEST DELTA3 TESTER GAZ CONFORM DVGW-TRGI 2008

• Usability test in accordance with G5952 or Esders express procedure
• Leak detection via external, digital hand sensor with integrated calibration and vibration alarm
• Automatic and manual test on controllers and safety valves
• Leak test with 150 mbar, strength test with 1 bar
• Pressure measurement up to 25 bar via external sensors

ESDERS SINGLE GAS DETECTOR MONOGAZ MONO-GAZ H2S CO O2

• Operational life of two years
• Full factory warranty throughout the life of 24 months
• Measurement of H2S, CO and O2 ensures the safety of the worker
• Reduces training time
• Loud audible alarm, bright visual alarm, vibrating alarm

ESDERS GOLIATH BIOGAS ANALIZOR DE BIOGAZ

• Use of infrared sensors for CH4 and CO2 guarantee fast run-in period and extremely short response times and exclude cross-sensitivities to other gases.
• An oxygen and a hydrogen sulphide sensor are offered as an option.
• The measurement range for H2S is 0 to 2,000 ppm and cover the requirement for measurements at biogas plants ideal.

ESDERS VAKUMOBIL

• The Esders Vakumobil has a markedly improved suction power compared to conventional technology.
• The low pressure in the surface generated by one suction probe has an impact over several metres.
• This creates only a movement or distortion of the gas accumulation but not there elimination.