The WT500 Power Analyzer excels at single- and three-phase power measurements. Standard features include a color TFT display and USB interface for communications and memory. The instrument has a basic power accuracy of 0.1%, maximum inputs of 1000 V, 40 A and a measurement bandwidth of DC to 100 kHz.

Features:

Simultaneous measurement of voltage, current, power, and harmonics
High-speed data updating (100 ms)
Display of numerical values, waveforms and trends
Measurement of bought and sold watt hours
Easy setup and operation

More products YOKOGAWA

YOKOGAWA 2558A AC VOLTAGE CURRENT STANDARD

• Output Divider
• Direct Readout of the Deviation
• Digital Display of Output
• Common Current Output Terminals
• High Accuracy
• High Stability

YOKOGAWA - DL350 PORTABLE SCOPECORDER

• A4-sized compact chassis
• Simultaneous isolated inputs maximum
• AC/DC/Battery operated
• Vibration resistant

YOKOGAWA DIGITAL INSULATION TESTER MY40

• 3 1/2-digit LCD;
• For each rating, you can save as many as 20 measurements at desired memory address numbers.
• Four AA (R6P) batteries the tester retains the measured resistance for approximately 5 seconds after the MEAS switch is turned off.

YOKOGAWA AQ1000 ENTRY LEVEL OPTICAL TIME DOMAIN REFLECTOMETER

• Wavelengths: 1310 / 1550 nm
• Dynamic ranges: 32 / 30 dB
• Size: 185 mm (W) � 116 mm (H) � 56 mm (D) ( 7.3" (W) � 4.6" (H) � 2.2" (D) )
• Weight: 660 g ( 1.46 Lbs )

YOKOGAWA - DIGITAL MANOMETER MT220

• Measurement with DCV and DCA
• 24 V DC output
• Percent reading
• Error reading
• Measurement data memory

YOKOGAWA PROCESS MULTIMETER CA450

• Simultaneous 24 V loop power and mA measurement
• HART mode setting with loop power (250 OHM resistance)
• High accuracy signal measurement: DC mA 0.05%/30.000 mA
• Handheld DMM function
• Peak/Hold function for DCS power peak-to-peak measurement

YOKOGAWA AQ2212 FRAME CONTROLLER (9 SLOTS)

• Easy-to-view color display
• USB port for data storage
• Measurement module "hot-swapping" capability
• Remote monitoring and measurement through a LAN

YOKOGAWA - SL1000 HIGH-SPEED DATA ACQUISITION UNIT

• Fast Acquisition
• Fast Transfer and Storage
• Easy to use
• Can operate "Standalone"

YOKOGAWA - DIGITAL MANOMETERS MT210 MT210F

• ±0.01%, with a maximum allowable input of 500 kPa (130 kPa-range model)
• Offering low differential pressure of 1 kPa to a high gauge pressure of 3000 kPa
• Normal speed, medium speed, and high speed (MT210F series)

YOKOGAWA POWER QUALITY ANALYZER CW500

• Power Measurement and Logging
• Power Quality Measurement
• User Support
• Analysis of Data and Report Generation