The communications industry is continually evolving, producing and demanding smaller products with advanced technologies. Yokogawa delivers quality products, such as the Digital Resistance Meter, which meet the needs for supporting smaller and more precise products. Through innovation and production, Yokogawa provides business tools to meet the challenges of a dynamic market and such production standards as ISO9000 criteria.

With features and benefits that offer you superior performance and cost-efficiencies, Yokogawa's instruments are easy to use and reliable.

Superior Performance

High Speed
- Direct measurement as fast as 2.8 ms (or 4.8 ms when including a contact check prior to measurement)
High Accuracy
- model 755611: (+/-0.006% of reading + 3 digits)
- model 755601: (+/-0.015% of reading + 1 digit)
High Resolution
- (5.5 digits in model 755611)

Easy to Use

Wide operating rangeability (1 Ohm range to 100 M Ohm range)
Full remote controlability via the standard RS232C serial, or optional GP-IB interfaces
Software based calibration
Printer output of measurement, and statistical analysis results

High Reliability

Advanced contact check function
- Check level and contact check time settings.
- Check time sufficient to ensure reliability.
- Monitoring of measured current even when measurement is in progress.
Superior noise resistance based on floating input

More products YOKOGAWA

YOKOGAWA - AQ6376 THREE MICRON OPTICAL SPECTRUM ANALYZER

• Long wavelength range: 1500 to 3400 nm
• Gas purging ports to reduce water vapor effects
• Built-In cut filter for high order diffracted light
• Double Speed Mode to further enhance fast measurement speed

YOKOGAWA - WT1800E HIGH PERFORMANCE POWER ANALYZER

• Harmonics analysis up to the 500th order of a 50/60 Hz fundamental frequency
• Up to 6 input channels at 2 MS/s (16 bits)

YOKOGAWA - WT300E DIGITAL POWER METER

• Fast display and data update rate: The fast display and a maximum data update rate of 100ms on the WT300E series, offers a short tact time in testing procedures.
• MAX hold function: The maximum values of RMS/PEAK Voltage & Current, Active Power, Reactive Power and Apparent Power can be held.
• Line filter and frequency filter capabilities: These filter functions will cut off unnecessary noise & harmonic components for fundamental waveform measurements.

YOKOGAWA AQ6150 SERIES OPTICAL WAVELENGTH METER

• High wavelength accuracy of ±0.3pm
• Cope with modulated light and optical filter measurement
• Simultaneous measurement of up to 1024 wavelengths
• Increase throughput with high speed measurement

YOKOGAWA AQ1100 OPTICAL LOSS TEST SET

• 5.7 inch color LCD for easy viewing
• Multi-Language support
• Multi-core fiber measurement with a pair set
• USB port for data storage

YOKOGAWA DIGITAL INSULATION TESTER MY40

• 3 1/2-digit LCD;
• For each rating, you can save as many as 20 measurements at desired memory address numbers.
• Four AA (R6P) batteries the tester retains the measured resistance for approximately 5 seconds after the MEAS switch is turned off.

YOKOGAWA AQ2180 SERIES PORTABLE OPTICAL POWER METER (W/ DATA STORAGE/TRANSFER)

• Two versions of Power Meters to suit test application
• Versatile data storage and transfer
• Auto switching of measurement wavelength
• Power source

YOKOGAWA - WT3000E PRECISION POWER ANALYZER

• Basic power accuracy: 0.01% of reading
• Both 2 A and 30 A input elements can be installed in a single unit
• Good readability: 8.4-inch LCD and the range indicator LEDs
• Simultaneous measurement with 2 units (Up to 8 power input elements)
• Store function: 50 ms data storing interval

YOKOGAWA - DLM4000 MIXED SIGNAL OSCILLOSCOPES

• DLM4038 350MHz
• DLM4058 500MHz
• (Standard) 8 analog channels or 7 analog channels + 8 bit logic
• (/L16 option) 8 analog channels + 16 bit logic or 7 analog channels + 24 bit logic
• Motor control & inverter circuit development
• Reliable triggering
• Best in Class Deep Memory & Architecture
• Two fully independent zoom windows

YOKOGAWA FG400 ISOLATED ARBITRARY/FUNCTION GENERATOR

• Frequency range: Sine wave 0.01 µHz to 30 MHz
• Amplitude resolution: 16 bits
• Sampling rate: 120 MS/s
• Output: 0 to 20 Volts, peak-to-peak