Display (LCD, Digital Counts)	1999
AC Current Accuracy (200A Reference)	1.5+6(50/60Hz) 2.0+5(40~1kHz)
AC Current Accuracy (600A Reference)	1.0+3(50/60Hz) 2.0+5(40~1kHz)
AC Voltage Accuracy (200V/600V Reference)	1.0+2(50/60Hz) 1.5+4(40~1kHz)
Resistance Accuracy (200O reference)	1.2+4, Beeps at below 30O (continuity check)
Method of detection	Mean Value
Response Time	Approx. 1 seconds (approx. 2 seconds on resistance range)
Range Switching	Manual-range
Data hold	On all range
Operating temperature and humidity	-10-50°C. (no condensation) up to 30°C, 90% RH up to 40°C, 75% RH up to 50°C, 45% RH
Influence of external magnetic field	2A or less at 400A/m
Influence of conductor position	± 2% or less
Safety Standard	Conforms EN 61010-1, EN61010-2-031, EN61010-2-032
Circuit voltage	600Vrms or less
Withstanding voltage	5.55kV AC for one minute
Power Supply	6F22(006P)9Vx1 or 6LR61x2
Battery Life¹	200 hours
Consumed current	Approx. 2mA
Auto power-off	Approx. 10 minutes
Diameter of measurable conductor	30mm at maximum
Dimensions	Approx. 93(W)x210(H)x40(D)mm
Weight (Approx.)	400g
Accessories	Clamp Adapter (Model 99025), Carrying Case (Model 93032), Test Lead (Model 98010), User's manual (IM CL130), batteries
Order Notes	Each item selected MUST be ordered as a separate line item.
Product Notes	All Clamp-on Meters include Test Leads (where applicable) and a carrying case.

More products YOKOGAWA

YOKOGAWA AQ6360 TELECOM PRODUCTION OPTICAL SPECTRUM ANALYZER 1200 - 1650 NM

• Wavelength range: 1200 to 1650 nm
• Wavelength resolution: 0.1 to 2 nm
• High wavelength accuracy: ±0.02 nm
• High dynamic range: 55 dB
• Wide measurement range: +20 to -80 dBm

YOKOGAWA 2553A PRECISION DC CALIBRATOR

• Digital Display of Output
• High Basic Accuracy
• High Stability and Low Noise
• High Resolution

YOKOGAWA MULTIFUNCTION CALIBRATOR CA150 (HANDHELD)

• Vertical Hand-Held Calibrator
• Simultaneous Source and Measurement for Process Devices
• Loop Power Supply Function
• Highly Accurate and Multi-Functional Source and Measurement

YOKOGAWA - DIGITAL MANOMETER MT220

• Measurement with DCV and DCA
• 24 V DC output
• Percent reading
• Error reading
• Measurement data memory

YOKOGAWA - MINI CLAMP-ON TESTER CL120 (200A)

• Exclusive model for AC current measurement with current ranges up to 200A
• 24mm in diameter of measurable conductor
• Light weight & compact design
• Mean value display

YOKOGAWA AQ2212 FRAME CONTROLLER (9 SLOTS)

• Easy-to-view color display
• USB port for data storage
• Measurement module "hot-swapping" capability
• Remote monitoring and measurement through a LAN

YOKOGAWA LS3300 AC POWER CALIBRATOR

• High Accuracy
• Phase Accuracy
• High Stability
• Wide generation range
• Single to three phase power calibration

YOKOGAWA CLAMP-ON TESTER CL150 (ACA, ACV, DCV, OHM, 2000A)

• AC/DC voltage and resistance measurements
• 54mm in diameter of measurable conductor
• Mean value display
• DC output function
• Data hold function

YOKOGAWA CLAMP-ON PROCESS METER CL420 (DC MA CURRENT)

• 0.2% Accuracy, 0.01mA Resolution
• Dual Display
• LED Torch Light, Backlight Display
• Analog Output Available

YOKOGAWA LOW PRESSURE CALIBRATOR CA700

• IP54 dustproof and water proof case for harsh environments
• 4-20mA step function for signal generation
• 20mA Simulator to carry out loop test.
• Two-wire Transmitter Loop Check