Normal attenuator can only introduce and display an attenuation value, you need a separate power meter to measure or adjust the output power value of attenuated optical signal. Working like a combination of attenuator and power meter, OVA-50 Output Power Control mode enables direct setting of precise optical power level and can automatically stabilize output level without any interference by variations of input power.

Features:

? Attenuation range: 2.5-60dB

? Direct output power control

? Working modes

? Output power control

? Absolute/relative attenuation setting

? Program (10 preset frequently-used attenuations)

? Adjust at step of 0.05/0.10/1.00/10.00 dB

? PC control via USB

? USB power charging

? Backlight

? Over 30 hours continuous operation

? Handheld, light and easy-to-use

? CE FCC certificates

More products SHINEWAY

VISIBLE LASER SOURCE SHINEWAY VLP-10/ VLS-20

• Pocket-size/pen-size, easy to use
• Fast response, no warm up
• CW/1 Hz mod
• 10Km for Max.measurement Range
• CE, FCC, FDA certificates
• One meter drop test

MULTI-WAVELENGTH LASER SOURCE SHINEWAY MLS-20

• Multi-wavelength selectable: 650/850/1300/1310/1490/1550/1625 nm
• 650 nm visible laser source for break and macrobend detection
• Modulation in CW and modulated frequencies
• Modulation frequencies in 270,1K, 2KHz (1Hz@650nm)
• 1625nm laser source with optical power meter to measure upper limit loss in DWDM

SHINEWAY OCC-50 CWDM OPTICAL CHANNEL CHECKER

• Result display in histogram and list
• Applicable to normal optical power measurement
• Internal clock & fiber S/N editable
• User definable threshold setting

OPTICAL FIBER CLEAVER SHINEWAY OFS-21

• Easy to use, Reliable
• Available for Single mode fiber at the standard qualification of ITU-T-Rec. G.652
• Desktop type
• Easy to replace blade
• Able to rotate to change the blade position

OTDR PLATFORM FOR OPTICAL FIBER NETWORKS METRO, ACCESS & FTTX SHINEWAY MTP-1000

• up to 3 functional modules, which is specially designed for FTTx/PON
• Flexible wavelength configurations to meet different requirements
• FTTX in-service testing
• PON OTDR identifies splitter and fiber-end
• 8.4 inch touch screen
• Fast power up with Windows CE
• Damp-dust-shock proof

OPTICAL FIBER FAULT LOCATOR SHINEWAY OFL-100

• Lightweight, portable
• High precise measurement, large memory capacity (200 test curves)
• RS-232/USB data upload port
• PC software for measurement data analyzing and reporting
• Display measurement by graphics curves
• NiMH rechargeable battery support 10 hours continuous operations

OPTICAL FIBER CONNECTOR CLEANER SHINEWAY CLN-10/ CLN-20

• Available for SC, FC, ST, etc. connectors
• Suitable for both field use and factory use
• Consistently achieve high quality cleaning without alcohol or other solvents
• Cleaning tape is replaceable, thus reducing long-term cost
• One cleaning tape can be used for over 600 wipes/reel

POLARISATION MODE DISPERTION FOR OPTICAL FIBERS CWDM SHINEWAY MTP-500

• ITU-T G.650 recommended method for PMD characterization:
• Accurate total PMD, PMD coefficient
• Fully support 10G/40G/100G DWDM optical network upgrade test
• Compliant with G.650.2, EIA/TIA FOTP-124 & IEC-61941
• High dynamic range for long span measurement 40dB or 200Km
• Easy to use touch screen
• External ports: RG45x1, RS232x1, USBx2, VGAx1

OPTICAL FIBER LOSS TESTER WITH INTEGRATED POWER METER AND LASER SOURCE SHINEWAY OTL-20/ OTM-20

• Support quick test, intelligentized operation
• Graphic interface, large easy to read LCD display
• Measurement units in dB, dBm and W (or mW)
• Large memory capacity (4000 measurements)
• Interchangeable fiber-optic adapters (FC, SC, ST, P/N, E 2000)
• RS-232 data upload port

OPTICAL FIBER FUSION SPLICER SHINEWAY OFS-80

• 5.7" Turn-over LCD screen for clear display Both X and Y axis display
• Fiber core can be display clearly
• Inner light to set fiber in dark environment Auto check fiber end-face
• Auto calculate splicing loss
• 9 seconds splice time and selectable heating mode
• 3 hours fast recharge
• 60 preset/user-definable splicing programs