Satellite Signal Detector DVB-S/ S2/ DSS Satfinder Promax SATHUNTER
OBSOLET PRODUCT ( * OUT OF USE )

• DVB-T, DVB-T2
• DVB-C, DVB-C2
• DVB-S, DVB-S2, DVB-S2 multistream
• DSS
• VIDEO CODECS MPEG-2, MPEG-4 H.264
• AUDIO CODECS MPEG-1, MPEG-2, HE-AAC

 

• 4 channels handheld pilot generator 5..900 MHz Frequency Range
• direct frequency band (downstream) and return band (upstream) in CATV
• fully-configurable by the user
• frequency and level of each pilot can be set independently
• powered by rechargeable batteries

 

• down converter for the 5.7 to 5.8 GHz frequency range to 1500 to 1600 MHz
• Converts signals from ISM 5.8 GHz to IF satellite band
• Supply from the signal level meter

 

• theoretical-practical study of a DVD & CD player
• observe the internal composition of the mechanics
• analyze the signals that take part of the operation
• simulate several faults for the study of troubleshooting and diagnostic methods

 

• DVB-T (DTT) output
• converts analogue/ digital video source to DVB-T with a max 200 programmes in the UHF band
• transmodulate Satellite TV channels to Digital Terrestrial Television multiplexes
• system allows to re-organise the spectrum, adding the off-air DTT channels received in the region
• encoding video-audio channels
• remotely controlled through Ethernet

 

• MPEG-2 TS INPUT: 2xDVB-ASI 75 ?, 1xDVB-SPI LVDS DB-25
• RF Output: 45 - 875 MHz
• CONTROL INTERFACE: Ethernet RJ-45 connector (SNMP compatible)
• 10 MHz GPS reference input

 

• designed to combine different RF (COFDM) signals in DVB-T format
• provides 46 dBm amplification and an output power of 130 dBµV (+22 dBm)
• to be assembled in a rack cabinet of 19 inches and 1U height
• FREQUENCY RANGE: 50 MHz to 860 MHz

 

• FREQUENCY BANDS: UHF from 470 MHz ~ 862 MHz
• 1 W RF power amplifier for COFDM signals
• both for single carrier or multicarrier system
• provides an amplified output of 30 dBm (137 dBµV)
• preserves the original signal quality and maintains a low noise levels

 

• 850, 1300, 1310, 1490, 1550 nm CALIBRATED WAVELENGTH
• Pocketsize, large LCD display, easy to use
• Measure six wavelengths through a single connector
• Direct loss measurements units in dB
• Absolute power measurement units in dBm and W (or µW)
• PC software available for testing data collection and report generation

 

• CATV and SMATV coaxial cable bands
• six pilots of frequency and level selectable by the user
• 8 preset memories for the six pilot signals.
• Frequency resolution: 25 kHz.
• User interface in several languages.
• USB to PC connection for firmware updating and to configure frequencies and levels.