The DT-700 is a passive module with four combiners 4x1 that can be used to mix the output RF signals of the COFDM modulators and transmodulators with DTT channels available in the area.

The system allows many different combinations to adapt to the needs of each system as best as possible.

This is a solution of higher quality than those that often use Z connections, given that preserves better the original quality and maintains lower noise levels.

INPUTS FOR EACH COMBINER	4 BNC female inputs 75 ? (16 total)
OUTPUTS FOR EACH COMBINER	1 BNC female output 75 ? (4 total)

Recommended options

DT-800B	Control unit and power supply.
DT-802	Control unit and redundant power supply modules.
DT-900	Rack and wall mounted structure.
DT-900B	Rack mounted structure.
DT-901	Empty module plates..
DT-902B	Power CAM modules for smart cards..
CC-043	Supply and control cable with 3 connexions for DT-800B (included)
CC-044	Supply and control cable with 4 connexions for DT-800B (included)
CC-143	Supply and control cable with 3 connexions for DT-802 (included)
CC-144	Supply and control cable with 4 connexions for DT-802 (included)
OP-XXX-V	Output in the range 170-650 MHz for modules with DVB-T..
OP-800-P	Option required to use DT-800B with 3 x DT-730 modules
OP-212-D	Dual independent output for DT-212B
OP-504-S	TS-ASI output option for DT-504B

	RECEIVERS WITH ASI-TS OUTPUT
DT-302	Dual DVB-S/S2 receiver with CAM, ASI-TS output.
DT-312	Dual DVB-T receiver, ASI-TS output.
DT-324-M	IP receiver to ASI-TS output (MPTS).
DT-324-S	IP receiver to ASI-TS output (SPTS).

	IP STREAMERS
DT-421-M	IP Streamer. ASI-TS inputs, IP output (MPTS)
DT-421-S	IP Streamer. ASI-TS inputs, IP output (SPTS)

	COMBINERS - AMPLIFIERS
DT-700	4x1 quadruple DVB-T combiner .
DT-710	8 input DVB-T combiner with a 117 dBuV (+10 dBm) one single output.
DT-722	4 input DVB-T combiner with a 129 dBuV / 250 mW (+22 dBm) one single output.
DT-730	DVB-T amplifier with a 137 dBuV / 1 W (+30 dBm).
DT-610	Optical transmitter module
DT-620	Optical receiver module

More products PROMAX

WI-FI WIRELESS NETWORK ANALYZER FOR 802.11B/ 802.11G PROMAX PROFI-70

• Wi-Fi Wireless Fidelity networks that fulfills the IEEE standard 802.11b and 802.11g
• practical, accurate, yet easy-to-use device
• simple alphanumeric keypad including soft-keys facilitates direct access to operating modes
• RS-232 interface for connection to a printer or computer
• DATALOGGER FUNCTION MEASUREMENTS: Channel, SSID, MAC, Power and Signal/Noise ratio

FTTH ANALYZER & OPTICAL FIBER SELECTIVE PON POWER METER GPON PROMAX PROLITE-67

• measuring simultaneously three wavelengths (1310, 1490 and 1550 nm) in FTTH / PON systems
• optimized for GPON architecture
• Visible Fault Locator by laser emission
• Data transfer to PC
• Graphical interface simple and very intuitive, easy-to-use

SFN/MFN MODULATOR ASI-TS MPEG -> DTMB PROMAX MO-280

• fully compliant with the GB20600-2006 and the GY/T 229. 1-2008 standards
• 10 MHz GPS reference input
• MPEG-2 TS INPUTS: 2xSerial ASI-TS MPEG-2 inputs
• RF Output: 45 to 875 MHz (1 Hz steps). MER > 38 dB

COFDM MODULATOR OF DUAL TRANSPORT STREAM-ASI -> DVB-T MULTIPLEX PROMAX DT-102

• TS INPUT: 2 DVB-ASI independent inputs
• RF OUTPUT: 2 independent combined DVB-T multiplex
• Filtering table up to 32 PID
• Measurement: Bitrate of the output multiplex
• includes an internal combiner that delivers a single DVB-T output with high C/N

MPEG-2 TRANSPORT STREAM RECORDER, PROCESSOR, PLAYER PROMAX TG-140

• record a transport stream continuously for several hours up to 15 hours at 20 Mbps
• ASI transport stream Input, Maximum data rate 150 Mbps
• ASI transport stream Output, SPI parallel transport stream Output, Maximum data rate 90 Mbps
• Hard disk 160 GB Storage Capacity
• USB, Ethernet interface

TRANSMODULATOR DVB-S/S2 -> DVB-T PROMAX DT-232

• DVB-S/S2 FI INPUT: 2 independent DVB-S/S2 IF inputs
• RF OUTPUT: 2 independent combined DVB-T multiplexes
• interface for Conditional Access Module (CAM)
• PID Filtering Table up to 32 PID

RECEIVER CONVERTER OPTICAL FIEBR -> DVB-T RF PROMAX DT-620

• OPTICAL INPUT: From 1100 to 1600 nm
• RF OUTPUT: From 470 MHz to 862 MHz
• optical SC input and an RF type BNC output
• suitable for optical links up to 40 km away

DIGITAL TERRESTRIAL RECEIVER DVB-T -> DVB-ASI TRANSPORT STREAM PROMAX DT-312

• RF INPUT: 2 DVB-T independent inputs
• TS OUTPUT: 2 independent double DVB-ASI outputs
• CAM and ASI output

PORGRAMMABLE CALIBRATED OPTICAL FIBER VARIABLE ATTENUATOR 60 DB FTTH PROMAX PROLITE-360

• Access all data from a single screen
• Up to 10 programmable attenuation sequences
• Low insertion loss (< 2 dB)
• Calibrated for standard FTTH networks wavelengths
• Attenuation is indicated in both absolute and relative modes
• USB to PC connection

COMBINER 4 X DVB-T -> 1 X DVB-T PROMAX DT-722

• FREQUENCY MARGIN: From 50 MHz (C-2) to 860 MHz (C-69)
• INPUTS: 4 inputs Female BNC, 75 ? impedance
• RF OUTPUT: 1 female BNC output, 75 ? impedance
• output designed to mix output RF signals of COFDM modulators and transmodulators with DTT channels