This generator cover the needs for testing the return path, the RP-100 and RP-100Q, signal generators are designed for the activation and later verification of the return path in CATV networks. These instruments are capable of generating 2 (RP-100) or 4 (RP-100Q) carriers that, inserted in a remote outlet, allow to observe the correct functioning in the head-end or any other point down in the line.

The instrument allows to independently program 2 or 4 pilots between 5 and 100 MHz with an output level in the range of 90 to 110 dBµV (30-50 dBmV) adjustable in steps of 1 dB. Since it permits to select independent frequencies for each pilot, you can perform multiple and simultaneous tests from different places or by different operators. The instrument comes with an internal rechargeable battery so it can be used on a remote site.

NUMBER OF PILOTS	2 (RP-100) or 4 (RP-100Q)
FREQUENCY RANGE	From 5 MHz to 100 MHz
PILOT LEVELS	From 30 to 50 dBmV (adjustable in 1 dB steps)
FREQUENCY RESOLUTION	10 kHz

More products PROMAX

PROMAX HD RANGER-ECO TV SIGNAL ANALYZER FOR DVB-T/C/S DVB/T2/C2/S2 DSS

• DVB-T, DVB-T2
• DVB-C, DVB-C2
• DVB-S, DVB-S2, DVB-S2 multistream
• DSS
• VIDEO CODECS MPEG-2, MPEG-4 H.264
• AUDIO CODECS MPEG-1, MPEG-2, HE-AAC

MULTI-CARRIER RETURN PATH CATV CABLE SIGNAL VIDEO GENERATOR 5..100 MHZ PROMAX RP-100/ RP-100Q

• RP-100: 2 generated carrier pilots
• RP-100Q: 2 generated carrier pilots
• 5 MHz to 100 MHz Frequency Range
• 90 to 110 dBµV (30-50 dBmV) adjustable in steps of 1 dB output level
• select independent frequencies for each pilot
• internal rechargeable battery

PROMAX RANGERNEO 2 TV AND SPECTRUM ANALYZER

• DVB-T, DVB-T2, DVB-T2 lite
• DVB-C, DVB-C2
• DVB-S, DVB-S2, DVB-S2 multistream
• ISDB-T/Tb
• DSS, ACM/VCM/CCM
• MPEG-TS

PC PERSONAL COMPUTER TRAINING SYSTEM PROMAX EO-865

• assembly, installation and configuration of all the components composing a multimedia PC
• composed of widely spread and high reliability hardware components
• multiple test points enable the main electrical signals
• establish failure diagnostic and repairing methods

TFT-LCD TRAINING SYSTEM FOR DVB-T PROMAX ET-893

• suitable equipment for the learning of the flat screen television sets operation
• equipped with TFT-LCD and Plasma technology
• allows the student to become familiar with Digital Terrestrial Television (DVB-T)
• includes a failures generation module

DISTRIBUTION TRANSMODULATING HEADEND SATELLITE DVB-S -> DIGITAL TERESTRIAL DVB-T PROMAX DTTV

• DVB-T (DTT) output
• converts analogue/ digital video source to DVB-T with a max 200 programmes in the UHF band
• transmodulate Satellite TV channels to Digital Terrestrial Television multiplexes
• system allows to re-organise the spectrum, adding the off-air DTT channels received in the region
• encoding video-audio channels
• remotely controlled through Ethernet

TRANSMODULATOR DVB-T -> DVB-T PROMAX DT-212

• RF INPUTS: 2 independent DVB-T inputs
• RF OUTPUT: 2 combined independent DVB-T multiplexes
• PID Filtering with Filtering Table up to 32 PID
• direct COFDM input that can be tuned to any multiplex
• ouput in the UHF band
• regenerate the quality of the multiplex when received from a noisy source
• change the input channel to another channel with total quality preservation

RADIO TRAINING SYSTEM PROMAX EU-832

• incorporated fault simulator module permits to practice units diagnosis and repairing methods
• designed from a stereo radio tuner equipped with the RDS system
• most advanced reception circuits

CONVERTER ASI-TRANSPORT STREAM-> IP PACKETS PROMAX DT-421

• TS INPUT: 4 x DVB-ASI
• IP OUTPUT: Ethernet 100/1000 Mbps. RJ45 connector
• Communication Protocol: UDP or RTP/UDP
• Transmission methode: MULTICAST
• Payload: 7 MPEG-2 packets

WIRELESS BAND DOWN-CONVERTER5.7..5.8 GHZ -> 1.5..1.6 GHZ PROMAX CV-589

• down converter for the 5.7 to 5.8 GHz frequency range to 1500 to 1600 MHz
• Converts signals from ISM 5.8 GHz to IF satellite band
• Supply from the signal level meter