0 to 200 mV, 0 to 20 V Voltage measure
0 to 100mV, 0 to 10 V Voltage source / simulate
0 to 24 mA Current measure
0 to 20 mA Current source / simulate
Measure loop current (0-20 mA, 4-20 mA) signals with very high accuracy of 0.015% and 1 mA resolution
Measure voltage output process signals from PLCs, transmitters
24V loop supply with simultaneous current measurement
Enhanced voltage and current measure and source accuracy
Improved battery life
250 ohm HART resistor with loop power
Holster features test lead storage
Compatible with toolpack magnetic hanging system
Step and linear ramp output function
Configurable zero and span settings

Standard accessories

Protective Yellow Holster with Test Lead Storage
Instructions Sheet (14 languages)
single 9V alkaline battery
Test Leads and Alligator Clips
NIST- traceable calibration report and data

More products FLUKE

FLUKE TI400 INFRARED CAMERA 320X240 RESOLUTION

• 320x240 Detector resolution
• Ruggedized high resolution 640x480 capacitive touch screen for quick menu navigation
• Range: -20 °C si +1200 °C
• Precision : ± 2 °C sau 2%
• Sensibility : = 0,05 °C

VOLTAGE DETECTOR FLUKE 2AC VOLTALERT

• Voltage detection from 200 to 1000 V AC
• Category IV - 1000 V overvoltage rated product

FLUKE TOPAS 1760 THREE PHASE POWER QUALITY RECORDER

• 8 input channels
• Fully IEC 61000-4-30 Class-A standard compliant
• Power quality statistics according to EN50160, DISDIP tables, ITIC, CEBEMA, ANSI
• 10 MHz, 6000 Vpk waveform capture
• GPS time synchronization
• records rms, min, max values for: Voltage Current Power P, Q, S Power Factor kWh Flicker Unbalance Frequency Harmonics Interharmonics

FLUKE 117 HANDHELD DIGITAL MULTIMETER ELECTRICIAN 3.5 DIGIT

• 3.5 digit
• 6000 count
• 0.5% accuracy
• VoltAlert™ technology for non-contact voltage detection
• AutoVolt automatic ac/dc voltage selection

HANDHELD LOOP CALIBRATOR FLUKE 705

• 0 to 28 V DC Voltage measure
• 0 to 24 mA Current measure
• 0 to 20 mA Current source / simulate
• mA accuracy of 0.02%

FLUKE 1652C MULTIFUNCTION INSTALLATION TESTER 250V-1000V

• Test voltage: 250V, 500V, 1000V
• Two measurements at once and a dual display
• PEFC/PSC and loop impedance
• Fast voltage measurement between L-N, L-PE and N-PE
• PASS/FAIL indication for RCD test results

INTERNAL BATTERY RESISTANCE ANALYZER FLUKE BT520

• Key measurements: Battery resistance, dc and ac voltage, dc and ac current, ripple voltage, frequency and battery temperature.
• Enhanced data analysis: Quickly compare trends, analyze results and create reports with included battery management software.
• Easy reporting: Generate PDF report on the PC software with analysis graphics and data table or quick email format report with csv file on the mobile app.
• Wireless communication
• USB Port

HANDHELD TEMPERATURE CALIBRATOR FLUKE 724

• -10 to 75 mV, 0 to 10 V Voltage source
• -10 to 75 mV, 0 to 30 V Voltage measure
• 0 to 24 mA Current measure
• 0 to 3200 O Resistance measure / source

FLUKE 6304/ 6304C AUTOMATIC RCL METER 50 HZ..100 KHZ

• 50, 60, 100, 120 Hz, 200 Hz to 20 kHz (100 Hz steps), 100 kHz test frequencies
• 0.1 % basic accuracy (0.05 % for PM 6304C)
• Easy to use, at-a-glance display

FLUKE MEMOBOX 1743 THREE PHASE POWER QUALITY LOGGER

• monitor & logging: V, A, W, VA, VAR, PF, energy, flicker, voltage events, and THD
• Plug and play
• Determines the root cause
• Monitors power for the long-term
• 0.1% voltage accuracy IEC61000-4-30 Class-A compliant
• IP65 water-proof