Extech 380462 Precision Milliohm Meter (220V)

• Constantly calculates and adjusts the Voltage and Current limit points according to available maximum power (160W)
• At maximum current (10A), voltage is limited to 16V
• At maximum voltage (42V), current is limited to 3.8A
• Dual action rotary encoder control with push knob for fine and coarse tuning

 

• Quickly locate 110V to 125VAC Circuit Breakers and Fuses
• Variable Sensitivity adjustment to pinpoint correct circuit breaker
• Bright Red and Green LEDs indicates if receptacle is correctly wired or six fault conditions
• Push button GFCI test
• Audible and visual circuit breaker indication

 

• Simultaneous numerical and graphical display of Humidity and Temperature readings, plus Time and Date
• Measures Humidity (10 to 95%RH) and Temperature (-20.0°F to 140.0°F) plus calculates Dew Point
• Basic accuracy 3%RH, 1.8°F/1°C
• Large dual graphical LCD displays with adjustable vertical and horizontal TAC resolution
• Internal memory records up to 49,000 data points and can be transferred to a PC via RS-232 serial port for further data analysis
• LCD indicates percentage of memory remaining
• Comes with 220V AC power supply

 

• Displays moisture level in wood and building materials such as wall board, sheet rock, cardboard, plaster, concrete, and mortar
• Audible Alert - tone rate beeps faster as the moisture level increases
• Icons display low, medium and high levels of moisture content
• Easy-to-use, compact-sized design

 

• Portable tester for measuring of both Free and Total Chlorine up to 3.50ppm
• 
• The CL500 is a free and total Chlorine meter. This chlorine tester measures up to 3.50ppm with 0.01ppm resolution on its large LCD screen. Complete with Free, Total and Zero Chlorine standard solutions, test bottles with covers, Free and Total Chlorine DPD powder (10pcs), cleaning cloth, 6 AAA batteries, and hard carrying case.

 

• Datalogging of single and 3-phase/3-wire or 3-phase/4-wire systems (up to 52,428 single phase readings or 17,476 3-phase readings)
• Flexible clamp probes can be used for wrapping around bus bars and wire bundles
• Large backlighting LCD displays up to 35 parameters in one screen
• Clamp-on True RMS power measurements with on-screen Harmonics display
• Simultaneous display of Harmonics and Waveform

 

• Non-invasive measurement to monitor moisture in wood and other building materials
• Select from 10 wood types and measurement ranges
• Measurement depth to 0.75" (20mm) below the surface
• LCD displays % moisture of wood or material being tested

 

• True RMS for accurate AC measurements
• 6000 count backlit LCD display
• Low Impedance (LoZ) prevents false reading caused by ghost voltages
• Low Pass Filter (LPF) for accurate measurements of variable frequency drive signals

 

• User adjustable Heat Index alarm
• Stopwatch/chronograph mode with 1/100 second resolution
• Fastest/Slowest/Average Lap recall
• 99 lap counter with 30 lap/split memory
• 10 hour countdown timer with audible beeper warning for the last 5 seconds
• Programmable alarm
• Calendar mode displays day, month, and date

 

• Built-in Non-contact Voltage Detector (from 100 to 600VAC)
• AC/DC Voltage, AC/DC Current, Resistance, Capacitance, Frequency, Type-K Temperature, Duty Cycle, Continuity / Diode
• Autoranging with manual override
• 4000 count high-contrast LCD display