• Measures Inductance, Capacitance, and Resistance with secondary parameter Q (Quality), D (Dissipation), R (Resistance), P (Phase), ESR (Equivalent Series Resistance)
• Simultaneous 20,000/2,000 count backlit display of the primary parameter (L, C or R) with the secondary parameter
• Auto Select measurement function with 1kHz default test frequency
• Five test frequencies
• Set Hi/Lo limits using absolute values or percentage limits

EXTECH CO30: CO (CARBON MONOXIDE) MONITOR

• Alternately displays Carbon Monoxide (CO) concentration, Air Temperature, and Relative Humidity readings (cycles approximately every 6 seconds)
• Visible bright tri-colored (green, yellow, red) LED alarm indicator
• Adjustable audible alarm for readings exceeding one of the selected ranges: 25ppm, 30ppm, 35ppm, 50ppm, 100ppm or 200ppm
• ZERO Re-Calibration function
• Manual Temperature and Relative Humidity Compensation (adjustable)
• CO Calibration function in fresh air

EXTECH EX540 12 FUNCTION WIRELESS TRUE RMS INDUSTRIAL MULTIMETER/DATALOGGER

• True RMS measurements for accurate AC Voltage and Current measurements
• AC/DC Voltage & Current, Resistance, Capacitance, Frequency (electrical/electronic), Temperature, Duty Cycle, Diode/Continuity
• Double molded for waterproof (IP67) protection, CAT IV-600V safety rating for industrial applications
• Data Acquisition Mode for real time data transmission directly to your PC
• 1000V input protection on all functions

EXTECH CB20: CIRCUIT BREAKER FINDER/RECEPTACLE TESTER

• Quickly locate Circuit Breakers and Fuses
• Receptacle Tester (Transmitter): Test GFCI circuits, LED indication of 2 test conditions and 6 wiring faults, Test Reversed/Open Connections
• Complete with Receiver, Transmitter and 9V battery
• Microprocessor-based automatic sensitivity adjustment, Audible and visual indication, low battery indicator, Ergonomic design

EXTECH 480836 RF EMF STRENGTH METER

• Ideal for EMF measurements of mobile/cell phones, base stations and microwave leakage
• Measurement optimized for 900MHz, 1800MHz and 2.7GHz
• Non-directional (isotropic) measurement with three-channel (triaxial) measurement probe
• Max Hold and Average functions

EXTECH LRK15 LIGHTING RETROFIT KIT WITH POWER CLAMP METER

• Designed for professionals who routinely audit existing and replacement lighting systems for energy efficiency and lighting performance
• Kit includes:
• LT300 - Light meter with digital and analog display of light in Foot-candles or Lux
• DT200 - Compact laser distance meter with area/volume calculation functions
• 380940 - 400A True RMS AC/DC power clamp meter
• Supplied in a soft carrying case that provides protection and organization for the meters whenever they are needed

EXTECH EX363 11 FUNCTION TRUE RMS MULTIMETER

• Ideal for HVAC applications
• True RMS for accurate AC measurements
• 6000 count white LED backlit display
• Functions include: NCV, AC/DC Voltage, AC/DC micro Current, Resistance, Capacitance, Frequency, Type-K Temperature, Diode Test, Continuity
• Fast 60-segment Analog Bargraph for viewing trends

EXTECH EX350 11 FUNCTION TRUE RMS MULTIMETER + NCV

• True RMS for accurate AC measurements
• 4000 count backlit LCD display
• Low Impedance (LoZ) prevents false reading caused by ghost voltages
• Low Pass Filter (LPF) for accurate measurements of variable frequency drive signals

EXTECH EX650 600A TRUE RMS AC CLAMP METER + NCV

• True RMS for accurate AC measurements
• 1.18" (30mm) jaw size accomodates conductors up to 350MCM
• 6000 count backlit LCD display
• Low Impedance (LoZ) prevents false reading caused by ghost voltages
• Built-in non-contact voltage detector (NCV) with LED indicator
• Built-in LED flashlight for working in dimly-lit areas

EXTECH EX365 10 FUNCTION TRUE RMS MULTIMETER

• Ideal for Industrial/Commercial appplications
• True RMS for accurate AC measurements
• 6000 count white LED backlit display
• Functions include: NCV, AC/DC Voltage, AC/DC Current, Resistance, Capacitance, Frequency, Diode Test, Continuity
• Fast 60-segment Analog Bargraph for viewing trends