Extech SD800 CO2, Humidity and Temperature Datalogger

Code: Extech SD800


 

Datasheet PDF, 0.19 Mb

Description

Records data on an SD card in Excel® format

SD800 monitors air quality in schools, office buildings, greenhouses, hospitals and anywhere that high levels of carbon dioxide are generated. Selectable data sampling rate of 5, 10, 30, 60, 120, 300, 600 seconds or automatic. Maintenance free dual wavelength NDIR (non-dispersive infrared) CO2 sensor. Triple LCD simultaneously displays CO2, Temperature and Relative Humidity. Complete with six AAA batteries, 2G SD memory card, universal AC adaptor, and mounting bracket.

  • Checks for Carbon Dioxide (CO2) concentrations
  • Maintenance free dual wavelength NDIR (non-dispersive infrared) CO2 sensor
  • Triple LCD simultaneously displays CO2 , Temperature and Relative Humidity
  • Measurement ranges: CO2 - 0 to 4,000ppm; Temperature - 32 to 122°F (0 to 50°C); Humidity - 10 to 90%RH
  • Datalogger stores readings on an SD card in Excel® format for easy transfer to a PC
  • Selectable data sampling rate: 5, 10, 30, 60, 120, 300, 600 seconds or Auto
  • Complete with six AAA batteries, 2G SD memory card, universal AC adaptor, and mounting bracket

Specifications

Range

CO2

0 to 4,000ppm

Accuracy

±40ppm ( <1000ppm); ±5% rdg (>1000ppm)

Resolution

1ppm

Temperature

32 to 122°F (0 to 50°C)

Accuracy

±1.8°F/0.8°C

Resolution

0.1°F/°C

Humidity

10 to 90%

Accuracy

±4%RH

Resolution

0.1%

Datalogging

20M data using 2G SD memory card

Dimensions

5.2 x 3.1 x 1.3" (132 x 80 x 32mm)

Weight

9.9oz (282g)

 

 

More products EXTECH

EXTECH 382100 1200A 3-PHASE POWER ANALYZER/DATALOGGER

• Single phase, 3-phase/3-wire or 3-phase/4-wire systems
• Large backlighting LCD displays 35 parameters simultaneously (MW, kVAR, MVA, PF plus the voltage and current of the 3 phases)
• Displays Active Power (kW), Apparent Power (kVA), Reactive Power (kVAR) and Power Factor
• Current measurements to 1200A and Voltage measurements to 600V

 

EXTECH RT30: WIRELESS AC CIRCUIT IDENTIFIER (914MHZ) WITH EXTERNAL PROBE

• Combines non-contact voltage and light detection with RF (Radio Frequency) transmission technology
• Remotely identifies mid-run AC wiring, circuit breakers, switched lines, AC outlets, and light fixtures
• Non-contact mid-run AC wiring identification without cutting into wires
• Lighting circuit identification using built-in light sensor

 

EXTECH RHT50 HUMIDITY/TEMPERATURE/PRESSURE DATALOGGER

• Datalogs up to 10,000 readings with a user programmable sample rate
• USB interface for easy set-up and data download
• Selectable Atmospheric Pressure Units: psi, hPa, kPa, and bar
• Selectable data sampling rate from 1 minute to 18 hours

 

EXTECH EA31 EASYVIEW™ LIGHT METER

• Compact and rugged design with large display
• Low range model measures to 2,000Fc/ 20,000Lux
• Data Hold and Min/Max readings
• Auto power off

 

EXTECH MP530A MULTIPRO® HIGH-PERFORMANCE MULTIMETER

• High basic DC Voltage accuracy of 0.08%
• Wide AC Voltage bandwidth of 40Hz to 20kHz
• Rugged design with protective holster and water resistant housing
• Backlit 5000 count LCD display for high resolution (0.01mV, 0.1µA, 0.01Ohm, 0.01nF, 0.001Hz)

 

EXTECH LT300 LIGHT METER

• Wide range to 40,000Fc or 400,000 Lux with max resolution to 0.01 Fc/Lux
• Relative mode indicates change in light levels, peak mode captures highest reading
• Remote light sensor on 12" (30.5cm) coiled cable - expandable to 24" (61cm)
• Utilizes precision photo diode and color correction filter
• Large LCD display with analog bargraph
• Backlight for readings in low light levels
• Complete with 9V battery, light sensor with protective cover, protective holster, and soft case

 

EXTECH MG300 13 FUNCTION WIRELESS TRUE RMS MULTIMETER/INSULATION TESTER

• Wireless USB interface transmits measurement data to a PC
• Backlit super large triple display
• 125V, 250V, 500V, and 1000V test voltages
• Insulation Resistance from 0.001MOhm to 4000MOhm
• Auto discharge of capacitive voltage

 

EXTECH 380193 PASSIVE COMPONENT LCR METER

• Simultaneous 20,000/10,000 count display of the primary parameter (L, C or R)
• Secondary parameter of Q (quality), D (dissipation) or R (resistance)
• Set Hi/Lo limits using absolute values or percentage limits
• Parallel or Series equivalent circuit
• Automatic blown fuse indication
• Built-in test fixture or use external test leads

 

EXTECH MO265 COMBINATION PIN/PINLESS MOISTURE METER

• Choice of measuring moisture in wood and other building materials with pinless technology or use traditional remote pin probe (included)
• %WME (wood moisture equivalent) pin moisture reading
• Relative pinless moisture reading for non-invasive measurement
• Digital LCD readout with backlighting feature and tri-color LED bargraph
• Quickly indicates the moisture content of materials
• Pinless measurement depth to 0.75" (22mm) below the surface

 

EXTECH SD700 BAROMETRIC PRESSURE/HUMIDITY/TEMPERATURE DATALOGGER

• Displays Barometric Pressure in 3 units of measure: hPa, mmHg, and inHg
• Triple LCD simultaneously displays Barometric Pressure, Temperature, and Relative Humidity
• Datalogger date/time stamps and stores readings on an SD card in Excel® format for easy transfer to a PC
• Selectable data sampling rate: 5, 10, 30, 60, 120, 300, 600 seconds
• Complete with (6) AAA batteries, SD memory card, Universal AC adaptor, and mounting bracket