Handstrap & Safety Lanyard Mount
Optional Fiber Optic Link
Interchangeable Probe Heads
Fitted Carry Case
Small/Lightweight for minimal field perturbance
Broadband Frequency Range
Economical Solution to Broadcast/Telecom Safety Monitoring Needs & Environmental Monitoring
One Hand Operation

Electrical Specifications

Averaging Modes	Linear, RMS, Spatial
Internal Memory	> 65,000 data points
Operating Time	> 20 hrs; 4-AA Batteries
Overload	> 1200 V/m
Resolution	0.01 V/m
User Selectable Units	V/m, A/m, T, mW/cm²

Standard accessories

Model HI-2200 Metering Unit

¼ X 20 Tripod Mount
Handgrip Strap
Shoulder Harness
RS-232 Data Interface Cable (9-pin D-sub connector)
Data Upload Software (Free download from our website)
User Manual
Fitted Carry Case
One Year Warranty

Recommended options

Probe View II PC Software

Optical Remote Data Link

Additional Probes

Electrical Specifications For Additional Probes

Model	Dynamic Range	Frequency Range	Sensor Detection Type
C300	< 1% - 999% of FCC std	100 kHz - 8 GHz	E-Field % of FCC std
C310	< 1% - 999% of ICNIRP	100 kHz - 8 GHz	E-Field % of ICNIRP std
E100	0.3 - 800 V/m	100 kHz - 5 GHz	E-Field isotropic
H200	30 mA/m - 10 A/m	5 MHz - 300 MHz	H-Field isotropic
H210	0.3 - 30 A/m	300 kHz - 30 MHz	H-Field isotropic

More products ETS-LINDGREN

ELECTRIC FIELD MEASUREMENT PROBES 500 KHZ..5 GHZ ETS-LINDGREN HI-4433

• Frequency Range: 500kHz - 5GHz
• Automatic Continuous Zeroing
• Fiber Optic Technology
• Dynamic Range down to 300 mA/m
• Data from each axis can be viewed individually

RF SHIELDED TEST ENCLOSURE FOR EMC TEST ETS-LINDGREN 5230

• Standard dimenssions 600 x 500 x 500 mm
• Progressive Latching
• Large Working Interior
• Up to 120 dB RF Isolation

ELECTRIC & MAGNETIC FIELD RF INDUSTRIAL COMPLIANCE TESTER 10..42 MHZ ETS-LINDGREN HI-3408

• 13.56 MHz, 27.12 MHz, 40.68 MHz Cal Frequencies
• Field Intensity Bar Graph
• On-Board Data Logging and Review
• Low Cost EMF Detection
• Electric and Magnetic Field Strength Measurements
• Data Logging (Up to 112 Points)

ACTIVE MONOPOLE RECEPTION ANTENNA 30 HZ..50 MHZ ETS-LINDGREN 3301C

• Frequency Minimum 30 Hz
• Frequency Maximum 50 MHz
• Connectors BNC (f)
• Impedance (Nominal) 50 ?
• Polarization linear
• 30 hours of continuous operation in a single charge

MULTI-OCTAVE PYRAMIDAL HORN ANTENNA LINEAR POLARIZED 960 MHZ..40 GHZ ETS-LINDGREN 3160

• Frequency Minimum 960 MHz
• Frequency Maximum 40 GHz
• Pattern Type directional
• Polarization linear

SHIELDED TEST CELL ENCLOSURE FOR WIRELESS MEASUREMENTS ETS-LINDGREN 5247

• Roll-About Casters
• Portable RF Shielded Enclosure for OTA measurements
• >80 dB Typical RF Isolation
• RF Absorber Lined
• Dual Polarized Horn Antenna
• 700 MHz - 10 GHz Frequency Range
• Linear & Circular Polarization

PROTECTION TEMPEST/ RFI/ EMI FILTERS FOR TELECOM ETS-LINDGREN N24X/ N29X

• Suitable for EMI, EMP and Tempest protection
• Tubular, flat-pack or modular design
• 100dB insertion loss
• New ISDN filters now available
• Matched to balanced 600 Ohm lines

RESONANT DIPOLE ANTENNA 30 MHZ..1 GHZ ETS-LINDGREN 3121D

• Frequency Minimum 30 MHz
• Frequency Maximum 1 GHz
• Impedance (Nominal) 50 ?
• Maximum Continuous Power 50W-260W
• Pattern Type omnidirectional
• Polarization linear

GTEM TEST CELL FOR EMC RADIATED EMISSIONS & IMMUNITY ETS-LINDGREN 5407

• Frequency: DC - 20 GHz (RI) 2 9 kHz - 5 GHz (RE) 1
• Post Production
• For all Phases of EMC Testing - Design Qualification - Pre-Compliance
• Full Compliance IEC 61000-4-3 ANSI C63.4

RFI/ EMI CONTROL FILTERS FOR ALARM, DETECTION AND MONITORING SYSTEMS ETS-LINDGREN N296X/ N2972

• Tubular, flat-pack or modular design
• Attenuation from 100dB at 10kHz
• Suitable for EMI, EMP and Tempest protection
• 24V DC and 250V AC/DC options