Display (LCD, Digital Counts)	3999
AC Current Accuracy (400A Reference)	1.0+3(50/60Hz) 2.0+3(40~1kHz)
AC Current Accuracy (2000A Reference, 0~1500A)	1.0+3(50/60Hz) 3.0+3(40~1kHz)
AC Voltage Accuracy (40/400V/750V Reference)	1.0+2(50/60Hz) 1.5+3(40~1kHz)
DC Voltage Accuracy (40/400V/1000V Reference)	1.0+2
Resistance Accuracy (400/4k/40k/400kO reference)	1.5+2, Beeps at below 50± 35O (continuity check)
DC Output Accuracy (400A, 0~400mV Reference)	.5?% rdg ± 0.5mV (50/60Hz) .5% rdg ± 0.5mV (40~1kHz)
Method of detection	Mean Value
Response Time	Approx. 2 seconds
Range Switching	Manual-range (on AC current range) / Auto-range (on AC voltage range, resistance range)
Data hold	On all range
Operating temperature and humidity	0-40°C, 85% RH or less (no condensation)
Influence of external magnetic field	1A or less at 400A/m
Influence of conductor position	± (2% rdg + 3dgt) or less
Safety Standard	Conforms EN 61010-1, EN61010-2-031, EN61010-2-032
Circuit voltage	1000Vrms or less
Withstanding voltage	5.55kV AC for one minute
Power Supply	R6P(SUM-3)x2 or LR6x2
Battery Life¹	150 hours
Consumed current	Approx. 5mA
Sleep Function	Automatically powered down in about 10 minutes after the last switch operation
Diameter of measurable conductor	54mm at maximum
Dimensions	Approx. 105(W) x 247(H) x 49(D)mm
Weight (Approx.)	470g
Accessories	Clamp Adapter (Model 99025), Output Cable for Terminal Screw (Model 91019), Carrying Case (Model 93034), Output Plug (Model 98012), Test Lead (Model 98011), User's manual (IM CL150), batteries
Order Notes	Each item selected MUST be ordered as a separate line item.
Product Notes	All Clamp-on Meters include Test Leads (where applicable) and a carrying case.

Alte produse YOKOGAWA

YOKOGAWA - WT3000E ANALIZOR DE PUTERE DE PRECIZIE

• Basic power accuracy: 0.01% of reading
• Both 2 A and 30 A input elements can be installed in a single unit
• Good readability: 8.4-inch LCD and the range indicator LEDs
• Simultaneous measurement with 2 units (Up to 8 power input elements)
• Store function: 50 ms data storing interval

YOKOGAWA CLAMP-ON TESTER CL130 (ACA, ACV, 600A)

• AC current measurement with current ranges up to 600A
• AC voltage and resistance measurements
• 30mm in diameter of measurable conductor
• Mean value display
• Data hold function

YOKOGAWA AQ6370D TELECOM OPTICAL SPECTRUM ANALYZER 600 - 1700 NM

• High wavelength accuracy: ±0.01nm
• High wavelength resolution: 0.02nm
• Wide dynamic range: 78dB typ.
• Wide level range: +20 to -90dBm

YOKOGAWA - PX8000 SCOPE-METRU DE PUTERE SI PRECIZIE

• Provides simultaneous voltage and current multiplication to give real-time power sampling.
• Trend measurements between waveforms can be calculated by mathematical functions (up to four million points).
• Supports the capture of power parameters over specific periods of time through the definition of start and stop "cursors".
• An always-active History function automatically records up to 1,000 historical waveforms.

YOKOGAWA GS610 SOURCE MEASURE UNIT

• Source and sink operation up to 110 V/3.2 A (four-quadrant operation)
• Basic accuracy: ±0.02% (DC voltage generation)
• Sweep output at up to 100-µ intervals
• Comes with abundant sweep patterns (linear, logarithmic, and arbitrary)
• Stores up to 65535 points of source measure data in the internal memory

YOKOGAWA DIGITAL MULTIMETER TY720

• True RMS measurement
• New Functions for Electronic and Industrial Use
• Simultaneous measurement and display of DC and AC
• Switchable RMS/MEAN detection

YOKOGAWA AQ4280 SURSA OPTICA PORTABILA

• - SC, FC or other connector adapter
• (Removable for convenient access for cleaning)
• AQ4280 A/B/C : FC/PC, SC/PC, ST/PC
• - Rubber protector to prevent damage when dropped
• - Carrying pouch to house unit and connector adapters

YOKOGAWA DIGITAL INSULATION TESTER MY40

• 3 1/2-digit LCD;
• For each rating, you can save as many as 20 measurements at desired memory address numbers.
• Four AA (R6P) batteries the tester retains the measured resistance for approximately 5 seconds after the MEAS switch is turned off.

YOKOGAWA MULTIFUNCTION CALIBRATOR CA150 (HANDHELD)

• Vertical Hand-Held Calibrator
• Simultaneous Source and Measurement for Process Devices
• Loop Power Supply Function
• Highly Accurate and Multi-Functional Source and Measurement

YOKOGAWA DM7560 DIGITAL MULTIMETER 6.5 DIGIT

• Full-color,high-resolution display with flexible display formats
• High-speed data logging with up to 30 k points per second
• High-capacity internal memory up to 100 k points
• Trend / histogram analysis available both in real-time and offline