Metrel MD 9035 is a unique automotive multimeter top class with many exciting features, such as: Selectable 4-stroke, 4-DIS/2-stroke, & 2-DIS engine RPM; Selectable Trig (+)/Trig- on % & ms readings; Selectable Sensitivity-Levels on RPM, Dwell, % & ms readings, BeepJack warning, Backlit display and Display hold. MD 9035 is also equipped with automatic range selection and extra fast analog bar-graph.

TEST FUNCTIONS

AC, DC voltage measurement;
AC, DC current measurement;
Capacitance measurement;
Resistance measurement;
Diode test;
Both IP (inductive) & IG (contact) RPM;
ms Fuel-injection on time;
% Duty cycle;
Dwell angle;
Line-Level Hz (ACV, DCV);
Frequency measurement;
Continuity test (acoustic signaling);
Electric field detection;
Temperature measurement

TECHNICAL DATA

Dimensions (w x h x l): 80 x 50 x 161 mm

Mass (without accessories): 340 g

Accesorii standard

MD 9035 Standard set

Multimeter MD 9035 with rubber holster
Test lead with probe, 2 pcs
Thermocouple probe, type K
Inductive pickup clip
1.5 V battery, type AAA, 2 pcs
Instruction manual
Warranty

Alte produse METREL

TESTER INSTALATII ELECTRICE MOBILE/ INTEGRATE FARA IMPAMANTAREA NEUTRULUI METREL MI3110 EUROTEST IM

• IT System recognizing, Voltage Range and Voltage Balance;
• ISFL Single Fault Leakage current from Phase 1 and Phase 2 to PE;
• Fuse Trip-out Ability Evaluation, Line Impedance and Ipsc Prospective Short Circuit Current;
• IMD Insulation / ELM Earth Leakage / RCM Residual Current Monitor Devices Control;
• Alarm Trigger or Trip-Out Check and Adjust.

TESTER RCD CURENTI DE SCURGERE SCURTCIRCUIT DISJUNCTOARE SI INTRERUPATOARE METREL MI 3122 SMARTEC Z

• Loop impedance / prospective fault current
• Line impedance / prospective short-circuit current
• Built-in fuse characteristics for quick evaluation of measuring results
• RCD tests (trip out time, contact voltage, ramp test, Autotest)
• Testing on 1- and 3-phase systems
• Phase sequence test

TESTER SECURITATE ECHIPAMENTE ELECTRICE PORTABILE METREL MI 3311 GAMMAGT

• Continuity test with 200 mA.
• Insulation resistance.
• Insulation resistance of isolated accessible conductive parts.
• Substitute leakage current.
• Substitute leakage current of isolated. accessible conductive parts.
• IEC cord polarity test.
• Voltage.
• Functional and visual inspection.

CLESTE AMPERMETRIC IDEAL PENTRU ELECTRICIAN METREL MD 9220

• DC and TRMS AC voltage up to 600 V
• TRMS current measurement up to 2000 A
• Resistance measurement
• Continuity test
• Diode test
• Frequency measurement
• Capacitance measurement

MEGOHMMETRU REZISTENTA IZOLATIE 5000V METREL MI 3201 TERAOHM 5KV

• Pre-set test voltages: 250V...5000V
• Automated testing - PI, DD, DAR calculations with automated resistance ranging (AR)
• Fault finding
• R(t) graph - Real time resistance against time graph plotting facility
• Faster testing - High 5 mA charging current quickly charges capacitive loads.
• Accurate
• Safe - High CAT IV, 600 V voltage protection

MEGOHMMETRU REZISTENTA IZOLATIE 5000V METREL MI-3202 GIGAOHM 5KV

• Five pre-set test voltages: 250V, 500V, 1000V, 2500V and 5000V
• up to 1 T? for insulation resistance
• 600 V for voltage measurements
• Quick setting - Quick & Easy test voltage selection
• Faster testing - 5 mA current source for quick charging of capacitive loads
• Safe - High CAT IV, 600 V voltage protection
• Easy to read - Large, bright LCD display with backlight

PLATFORMA PENTRU DEMONSTRAREA PANOURILOR DE INTRERUPATOARE SI COMUTATOARE ELECTRICE IN SISTEME MONO SI TRIFAZATE METREL MI 3099 DEMO

• Switchboard and on Circuit side
• supporting one and three phase system
• RCD can be simulated
• TN-C(S) or TT type of earthing system on electrical installation

ANALIZOR CALITATEA ENERGIEI ELECTRICE CLASA A METREL MI 2892 POWER MASTER

• Voltage: TRMS, peak, crest factor (4-channel)
• Current: TRMS, peak, crest factor (4-channel)
• Power (active, reactive, apparent)
• Power measurements fully compliant with IEEE 1459 (active, nonactive, fundamental, harmonic, load unbalance)
• Unbalance, flicker measurement
• Harmonic and interharmonic analysis up to 50th harmonics, THD measurement
• Energy (active, reactive, generated, consumed)
• Power quality analysis according to EN 50160 and IEC 61000-4-30 Class A

TESTER MULTIFUNCTIONAL INSTALATII ELECTRICE MASURA REZISTENTA IZOLATIE, CONTINUITATE, PRIZA DE PAMANT METREL MI 3105 EUROTEST XA

• insulation resistance,
• PE conductor continuity test,
• Line and Loop esistances with Fuse evaluation table built-in,
• RCD test with Trip lock function,
• phase sequence in 3-phase systems,
• on-line voltage monitor,
• 2-wire and 3-wire Earth resistance test with built-in battery operated generator,
• earth resistance test with Two Clamps method,
• Leakage Current test,
• test of Luminance with optional LUX meter probe

TESTER ELECTROSECURITATE ECHIPAMENTE PORTABILE CF. STANDARD IEC EN VDE METREL MI 3304 BETAGT PLUS

• Continuity tests (200 mA, 4 A, 10 A, 25 A).
• Insulation resistance.
• Substitute leakage current.
• Differential leakage current.
• Touch leakage current.
• IEC cord polarity test.
• Leakage and load TRMS current measurement with current clamp.