The SPI225 is a high current primary injection test system for all forms of high current testing required in a substation, including testing overcurrent relays, circuit breakers, motor overloads and current transformers.

The SPI system is the FIRST high current test systems to permit a user to type in a predetermined current and the SPI system will generate and regulate the requested high current without preheating the test sample by pulsing the output current at high currents. The SPI system also has the unique ability to turn on at the current zero crossing every time for any load by automatically adjust the output firing angle. This eliminates DC offset for every circuit breaker type and the need for the user to determine and adjust the firing angle for different loads and circuit breakers.

All SPI systems are both fully automated and/or manually controlled. The Smart Touch View Interface ½STVI½ permits users to manually control the unit and also perform automated testing. The SPI unit can also be controlled by a PC for fully automatic testing and report generation.

Features:

Up to 2000A output
Smallest primary injection test system in its class
First unit on the market to eliminate variac control
Output current regulation
Designed for switchgear commissioning, circuit breaker, CT commissioning, ground grid and relay testing
Software includes thousands of circuit breaker TCC curves

Alte produse MEGGER

ANALIZOR RASPUNS IN FRECVENTA TRANSFORMATOARE DE PUTERE MEGGER FRAX

• Frequency range 0.1 Hz - 25 MHz, user selectable
• Highest dynamic range and accuracy in the industry
• Smallest and most rugged FRA?instrument in the industry
• Fulfills all international standards for SFRA measurements
• Advanced analysis and decision support built into the software
• Imports data from other FRA test sets

REFLECTOMETRU TDR LOCALIZARE DEFECTE CABLU MEGGER TDR500/3

• minimum resolution of 0.1 m and a 5 km maximum range
• Simple operation.
• AUTO selection of gain and pulse width.
• Ultra fast pulse for near end fault identification.
• Trace HOLD feature.
• IP54 rating offers real life working.
• Designed for use on all metallic cable pairs.

AC VOLTAGE DETECTORS MEGGER - VF3

• Non-contact detection of AC voltage
• Automatic audible warning buzzer
• Bright red voltage indicator in tip
• Ultra bright LED torch

TESTER CAPACITATE SI FACTOR DISIPATIE TRANSFORMATOARE MEGGER CDAX-605

• capacitance and dissipation factor test
• High accuracy and wide measurement range
• Automatic measurement process
• Measures capacitive, resistive or inductive test objects
• High accuracy ratio measurements
• Works with any standard capacitor or resistor value without any recalculations
• All standard UST and GST configurations

LOCATOR TRASEE CABLURI MEGGER CARLOC

• Afișaj cu contrast ridicat pentru o bună lizibilitate ziua și noaptea
• Indicarea direcției curentului pentru identificarea clară a cablului
• Emițător cu două semnale de ieșire pentru a distinge cablurile așezate unul lângă altul
• IP 65 pentru medii de lucru umede, prăfuite și murdare
• 100 de frecvențe ale emițătorului reglabile liber (de la 50 Hz la 200 kHz)

AUTOMATIC OIL CIRCUIT RECLOSER TESTER MEGGER OCR8015/9150

• Preprogrammed test sequences for reclosers and sectionalizers
• High-capacity outputs to test virtually all reclosers
• Accurate duplication of high-voltage test results
• Simple operation and precise test results
• Simplified adjustment of test current

TESTER UNIVERSAL ELECTRICIAN INSTALATII MEGGER MFT1800 MFT1825 MFT1815

• Testarea RCD de tip B şi a RCD trifazate pentru aplicaţii industriale fără împământare
• Testarea buclei fără declanșare cu două şi trei fire pentru circuite protejate de RCD
• Opţiuni de teste cu 3 poli, 3 poli cu tehnica tijei atașate, 2 poli şi fără ţăruşi pentru măsurarea rezistenţei electrodului de împământare
• Selecţie simplă a testelor codificate prin culori şi afișaj mare, clar, iluminat din spate pentru ușurinţă în utilizare
• Test de continuitate cu inversare automată a curenţilor de testare de 200 mA şi 15 mA la alegere

FORK MULTIMETER MEGGER - DCM330

• 200.0 A a.c. open-jaw current measurement
• 0.1 V to 1000 V auto-ranging a.c. and d.c. voltage measurement
• 0.1 O to 20.00 MO resistance range
• Continuity buzzer

TESTER TDR LOCALIZARE DEFECTE CABLURI MEGGER TDR1000/3

• minimum resolution of 0.1 m and a 5 km maximum range
• Simple operation.
• AUTO set up for instant use.
• Ultra fast pulse for near end fault identification.
• Trace HOLD feature to allow comparison between cables.
• IP54 rating offers real life working.
• Designed for use on all metallic cable pairs.

BOND TESTER MEGGER - BT51

• High test current
• Four terminal measurement
• Two measuring ranges (2000 mO. and 20,00 mO.)and maximum resolution of 0,01 mO.
• Protected against inadvertent connection to the mains supply