This instrument was developed to detect, track and locate ground faults on battery systems - without resorting to sectionalizing! Model BGL tracks and locates ground faults on live or dead battery systems. To save hours of unnecessary troubleshooting, the BGL readily differentiates between the resistive fault currents and capacitive charging currents. This feature allows the instrument to detect and track leakage paths, even in the presence of surge-suppression capacitors.

Features:

Ground faults in ungrounded dc battery systems easily located
Operates in high electrical noise environment
Simplifies fault tracing by identifying fault characteristic (resistive and capacitive) magnitudes

Alte produse MEGGER

DIGITAL CLAMP METER MEGGER - DCM310 AND DCM320

• Option of current only , DCM310 or multimeter, DCM320 models
• Measures up to 400 A a.c. with low current ranges for improved resolution
• 600 V a.c./d.c. DCM320
• 20 MO Resistance DCM320

DIGITAL MULTIMETER MEGGER - DCM340

• DC and AC current and voltage
• 600 A and 600 V
• Resistance and continuity
• 31/2 digit, 4000 count display with backlight
• High resolution digital bargraph

TESTER INDUSTRIAL MULTIFUNCTIONAL APLICATII FOTOVOLTAICE PANOURI SOLARE MEGGER IMT100

• Tester puternic 3 în 1 pentru instalaţii fotovoltaice sigure şi precise
• Excepţional de sigur de utilizat
• Suită completă de teste pentru rezistenţa izolaţiei
• Pregătit pentru condiţii exterioare

TRUSA TRIFAZATA MASURA RAPORTULUI DE TRANSFORMARE MEGGER TTRU3

• Precizie garantată ±0,05% de la -20°C la +50°C
• Tensiune de testare 3Ø - până la 250V
• Raport de creștere a tensiunii 3Ø (patentat)
• Transformatoare defazate și zig-zag testate
• ușor și precis
• Cel mai mic/ușor set de testare 3Ø de pe piață
• Teste rapide 3Ø - mai puțin de 10 secunde

SARCINA TESTARE DESCARCARE BATERII UPS-URI MEGGER TORKEL 820

• Combines efficiency with portability
• Batteries can be tested "in service"
• Discharge 24 and 48 V batteries at a current of 270 A
• 12 V batteries at 135 A
• Two or more TORKEL 820 units and/or extra load units TXL, can be linked together if you need higher current.

STATIC / DYNAMIC RESISTANCE MEASUREMENT ACCESSORY FOR EGIL MEGGER - SDRM201

• Enables resistance measurement on circuit breakers
• Small and light weight
• A number of operations can be run with short waiting intervals

TESTER DE IZOLATIE SI CONTINUITATE CU ALARMA MEGGER - MIT200 SERIES

• Sunt disponibile doua sau trei tensiuni de test asigur½nd solutia ideala pentru majoritatea aplicatiilor din zona tensiunilor joase
• Masurarea rezistentei de izolatie p½na la 1000 M? pe toate domeniile
• Descarcarea automata ne asigura ca toate circuitele sunt descarcate sigur dupa ½ncheierea testelor
• Tensiunea de test a izolatiei de 1000 V are o avertizare de ½nalta tensiune ½nainte de a aplica tensiunea

TESTER IZOLATIE COMUNICATII MEGGER MIT480/2 MIT481/2 MIT485/2 500V

• Testarea izolaţiei până la 500 V şi intervalul 100 GΩ într-un instrument portabil
• Conexiune cu 3 fire pentru conexiunea A, B şi E (vârf, inel şi împământare/împământare)
• Acces protejat la 500 V pentru a preveni deteriorarea accidentală
• CAT IV 600 V şi IP 54

PRIMARY CURRENT INJECTION TEST SYSTEM MEGGER ODEN AT

• Most advanced primary current injection test system to simplify all types of switchgear and CT commissioning, ground grid, circuit breaker testing and more
• Modular design to permit optimal user configuration of output current vs. unit size
• Compact transport cart facilitates portability into switchgear rooms with limited space
• Unique I/30 function allows the current to be pre-set using low current to prevent test sample heating, thus eliminating corruption of test result

TRUSA COMPLEXA PENTRU VERIFICAREA RELEELOR DE PROTECTIE MEGGER FREJA 400

• FREJA 403 3x60 A at 300 VA per phase.
• FREJA 406 Up to 6 channels: 3 x 60 A and 3 x 15 A
• FREJA 409 Up to 9 channels: 6 x 60 A and 3 x 15 A
• Voltage outputs : Up to four channels 300 V at 150 VA
• Fully automated testing using FREJA Win software
• PC operated or stand alone using the intuitive graphic touch screen
• High current, high power output (60 A / 300 VArms) per phase
• FREJA 409 provides 3 x 120 A in threephase configuration mode
• FREJA 406 provides 6 currents, and FREJA 409 provides 9 currents for transformer differential testing
• IEC 61850 test capabilities