GOODWILL INSTEK GPD-Series

Cod: GOODWILL INSTEK GPD-Series


 

Brosura produs PDF, 3.04 Mb
     

Descriere

The GPD-X303S Series contain the superior technology and high quality which GW Instek had established through its long history of power supply design and manufacturing.The GPD-X303 Series offers digital panel control, large display, bright LED indicators, high output resolution, 4 sets of setup memory, USB remote control and smart cooling fan control. Additionally , the GPD-X303S Series provide easy operation , a wide selection of panel setting and operation , a wide selection of panel settings. All these features make the GPD-X303 Series the most proming new comer in the power supply maeket.

 

Features:

  • 2/3/4 Independent Isolated Output
  • 4 LED Display Sets: 3 digits after decimal point
  • Minimum Resolution :
  • 1mV/1mA(GPD-2303D/GPD-3303S/GPD-4303S)
  • 100mV/10mA(GPD-3303D)
  • Digital panel control(rotary encoder Switch, rubber key with indicator)
  • User-friendly operation, coarse/fine volume control
  • 4 Sets Save/Recall
  • Key-Lock
  • Output on/off
  • Tracking Series and Parallel mode
  • Smart cooling fan achieving low noise
  • USB Standard Interface
  • PC Software & USB Driver
  • Labview driver
 

Alte produse INSTEK

GOODWILL INSTEK AFG-303X SERIES

• Input/output signal ground independent of housing and signal ground between channels also insulated.
• Synchronized phase operates up to 6 units and 12 channels
• Pulse waveform parameters can be set independently for more precise timing
• Harmonic signal generator

 

GOODWILL INSTEK LCR-900 SERIES

• Parallel/Series Testing Mode
• Sorting Mode for Quality Control
• 2Wire or 5Wire Measurement Available
• Data Hold and Zero Mode Supported

 

GOODWILL INSTEK GDM-8135

• High Voltage 1000V and 20A Current Range
• All Range with Protection Circuit
• 0.1% DCV Accuracy
• Auto Zero Circuit

 

GOODWILL INSTEK PSH-SERIES

• Over voltage over current and over temperature protection
• Low ripple and noise
• Output on/off control
• Self-test and software calibration

 

GOODWILL INSTEK GDM-8255A

• GDM-8255A 199,999 Counts Display
• VFD Two Colors Display
• 0.012% DCV Accuracy
• True RMS (AC, AC+DC)

 

ANALIZOR DE SPECTRU RF 9KHZ..3GHZ GW INSTEK GSP-830

• Frequency Range : 9kHz ~ 3GHz
• Low Noise Floor(-117dBm@1GHz, 3k RBW)
• Sequence Programming Functions
• ACPR, OCBW, Channel Power, N-dB and Phase Jitter Measurements
• 10 Markers with Delta Marker, Peak Functions
• AC/DC/Battery(Option)three modes of power supply
• USB/RS-232C/GPIB(Option) Interface
• 6.4" TFT Color LCD, Resolution: 640x480

 

GOODWILL INSTEK PLR-SERIES

• Output Voltage Rating:20V / 36V / 60V
• Output Power:360W / 720W
• Low Ripple and Noise (0.5mVrms/ 10mArms)
• Fast transition recovery time(100us)
• Maximum 2 units in series connections or 3 units in parallel connections

 

GOODWILL INSTEK APS-7000 SERIES

• Low Ripple & Noise
• Measurement and test functions include VOLT?CURR?PWR?SVA?IPK?IPKH?FREQ?PF?CF
• Support a small AC current measurement 2mA ~ 35A, Min. resolution 0.01mA(APS- 7050& APS-7100)
• Reverse Current Alarm Function

 

OSCILOSCOP ANALOGIC 2 X 100 MHZ GW INSTEK GOS-6103

• 100 MHz bandwidth, Delayed Sweep
• 2 analog channels
• 10 Sets Memory for Front Panel Setting Save & Recall
• Time Base Auto-range
• Cursor Readout with 7 Measurements

 

GOODWILL INSTEK GOM-802

• 30000 Counts Display
• High Accuracy 0.05%
• Hi/Lo Comparator and Limit Percent Setting
• Measurement of REL, Actual and % Value
• Continuous or Triggered Measurement Mode