The PPS-3635 is a single output, 126W Output, programmable linear DC power supply. OVP and OCP hardware protection, compliance to major safety standards such as UL, CSA, and IEC, ensures a high level of safety and reliability. The remote sense adds extra level of precision by compensating cable losses between loads. The SCPI command set and LabVIEW driver access through GPIB interface provide remote control and ATE software development. The flexible PPS-3635 is ideal for high-level applications requiring high precision and an extra level of safety.

Features:

Easy Operation with UP/DOWN Key
High Resolution: 10mV, 1mA
Over Voltage Protection, Over Current Protection by Hardware
100 Sets of Memory
Self Test and Software Calibration
Meets UL CSA IEC Safety Regulation
Auto Step Running With Time Setting
FRONT/REAR Output and Sense Switch Selectable
IEEE-488.2 and SCPI Compatible Command set
Labview Driver Software
High Stability, Low Drift
4 Digit Display

Alte produse INSTEK

GOODWILL INSTEK GAD-201G

• Automatic level & distortion measurements
• Auto or Hold function selectable
• 0.1% ~ 100% in 7 distortion measuring ranges
• 20Hz ~ 20kHz in 3 continuous ranges
• 400Hz, 1kHz, 10kHz 3 frequency spots
• 1mVrms ~ 300Vrms in 12 ACV measuring ranges

GOODWILL INSTEK PSS-SERIES

• High Resolution 10mV, 1mA
• High Stability, Low Drift
• Over-Voltage, Over-Current, Over Temperature Protection
• Intelligent Fan Control (Changes by Output Power)

GOODWILL INSTEK LCR-6000 SERIES

• Consecutive test frequency
• Basic accuracy : 0.05%
• Measuring speed up to 25ms (max.)
• Full frequency range or spot OPEN/SHORT

GOODWILL INSTEK PEL-2000A SERIES

• Multiple independent load inputs up to 8 channels in a mainframe
• Parallel connection of inputs for increased load capacity
• Parallel connection of inputs for static and dynamic tests
• OPP/OCP/OVP/OTP protections

OSCILOSCOP ANALOGIC 2 X 30 MHZ GW INSTEK GOS-6031

• 30 MHz bandwidth
• 2 analog channels
• 1mV/div ~ 20V/div
• Cursor Measurement, 6 Digit Frequency Counter, 10 sets Memory for Front Panel Setting Save & Recall

GOODWILL INSTEK APS-7000 SERIES

• Low Ripple & Noise
• Measurement and test functions include VOLT?CURR?PWR?SVA?IPK?IPKH?FREQ?PF?CF
• Support a small AC current measurement 2mA ~ 35A, Min. resolution 0.01mA(APS- 7050& APS-7100)
• Reverse Current Alarm Function

GOODWILL INSTEK PPE-3323

• 50 Sets memory
• Self test and software calibration
• Meets UL, CSA, IEC safety regulation
• Auto step running with timer setting

TRUSA INCERCARI 5KV GWINSTEK GPT-9801 GPT-9802 GPT-9803 GPT-9804

• 200VA AC Test Capacity
• 240x64 Ice Blue Dot matrix LCD
• Manual/Auto Mode
• Controllable Ramp-up Time
• True RMS Current Measurement
• High resolution: 1uA for measuring current, 2V for setting voltage
• Interface : RS-232C, USB device, Signal I/O and GPIB (optional)

GOODWILL INSTEK GOM-801H

• 3 1/2 Digits 0.5" LED Display
• Measures from 20mO ~ 20kO in 7 Ranges
• 1A High Test Current
• High Resolution 10uO
• Hi/Lo Comparator Indicator and Buzz Alarm

OSCILOSCOAPE DIGITALE 2/4 CANALE 150/250/350/500MHZ INSTEK GDS-3000

• GDS-3152 150MHz, 2 channel, 2.5GSa/s
• GDS-3154 150MHz, 4 channel, 5GSa/s
• GDS-3252 250MHz, 2 channel, 2.5GSa/s
• GDS-3254 250MHz, 4 channel, 5GSa/s
• GDS-3352 350MHz, 2 channel, 5GSa/s
• GDS-3354 350MHz, 4 channel, 5GSa/s
• GDS-3502 500MHz , 2 channel, 4GSa/s
• GDS-3504 500MHz , 4 Channel , 4GSa/s