In terms of cost/performance ratio, the GDM-8135 yields one of the best choices among the DMMs in today's market. It is equipped with 3 1/2 digits, 0.5" LED display in a distinctive red color. Measurement items include DC Voltage/Current, AC Voltage/Current, Resistance, Diode Test, and Continuity with Beeper.

Small voltage offsets are canceled by the auto-zero circuit, and protection mechanism is available for the entire measurement range. All these features provide users with robust measurement experience.

Features:

Vast Measuring Functions : AC/DC Voltage, AC/DC Current, Resistance, Diode Test and Continuity Beeper
Large 0.5" Red LED Display
High Voltage 1000V and 20A Current Range
All Range with Protection Circuit
0.1% DCV Accuracy
Auto Zero Circuit

Alte produse GW INSTEK

TRUSA INCERCARI 5KV GWINSTEK GPT-9801 GPT-9802 GPT-9803 GPT-9804

• 200VA AC Test Capacity
• 240x64 Ice Blue Dot matrix LCD
• Manual/Auto Mode
• Controllable Ramp-up Time
• True RMS Current Measurement
• High resolution: 1uA for measuring current, 2V for setting voltage
• Interface : RS-232C, USB device, Signal I/O and GPIB (optional)

GOODWILL INSTEK GFG-3015

• Built-in 6 Digits Counter up to 150MHz/High Resolution
• Output Waveform : Sine,Square,Triangle,Ramp,Pulse,Sweep,Gate or Burst
• INT/EXT AM/FM Modulation
• GCV Output for Synchronization

GOODWILL INSTEK GDM-8245

• Dual Display Indicate ACV and Hz,or DCV(ACV) and dBm
• Manual or Auto Ranging
• 0.03% DCV Accuracy
• ACV Measuring Frequency Up to 50kHz

GOODWILL INSTEK PSB-2000 SERIES

• Output Voltage Rating : 80V/800V
• Output Power Rating : 400W~800W
• Constant Power Output for Multi-Range(V&I)Operation
• Series and Parallel Operation(2 Units in Series or 4 Units in parallel Maximum)

OSCILOSCOP DIGITAL 2 CANALE 70/100/150MHZ INSTEK GDS-1000A-U

• 150/100/70MHz Bandwidths
• 1GSa/s Real-Time Sample Rates Maximum, 25GSa/s Equivalent-Time
• 2Mega Points Record Length
• 2mV~10V Vertical Scale
• 1ns~50s Horizontal Range
• Up to 27 Automatic Measurements
• 5.7" TFT LCD Display
• USB Host and Device Interface Supported
• Go/NoGo Function
• Data Logger

ANALIZOR DE SPECTRU RF 9KHZ..3GHZ GW INSTEK GSP-830

• Frequency Range : 9kHz ~ 3GHz
• Low Noise Floor(-117dBm@1GHz, 3k RBW)
• Sequence Programming Functions
• ACPR, OCBW, Channel Power, N-dB and Phase Jitter Measurements
• 10 Markers with Delta Marker, Peak Functions
• AC/DC/Battery(Option)three modes of power supply
• USB/RS-232C/GPIB(Option) Interface
• 6.4" TFT Color LCD, Resolution: 640x480

TRUSA MASURA CURENT DE ATINGERE GW-INSTEK GLC-9000

• Touch Panel with Color LCD Display
• 9 Different Measurement Network to Simulate
• the Resistance of Human Body
• 8 Different Types of Leakage current for Medical
• & General Electrical Equipment
• Various Leakage Current Measuring Mode:DC/AC/AC+DC/AC Peak
• Upper & Lower Limitation for PASS/FAIL Judgment
• Meter Mode with SELV/CONV Function
• 50 Preset Test Conditions Conform to IEC 60990;
• 30 Sets Memories for Customer Defined
• Various Standard Interfaces RS232/GPIB/USB Host & Device/EXT I/O

GOODWILL INSTEK GPM-8213

• Two data display modes
• Standard : two major measurement items + six secondary measurement items
• Simple : displaying test data of four different measurement items
• Met the requirement of IEC 62301 power measurement
• Voltage/ current test frequency bandwidth : DC~6kHz

GOODWILL INSTEK LCR-8000G SERIES

• Large LCD Display with Intuitive Interface
• Full Measuring Functions with DUT V/I Monitor
• PASS/FAIL Function ( abs, % or delta) with Judgment Alarm
• DC Resistance Measurement
• Multiple Step Mode

GOODWILL INSTEK GDM-400 & GDM-300

• 22000 Counts Auto/Manual Ranging (GDM-461)
• 4000 Counts Auto/Manual Ranging (GDM-397/398)
• 6000 Counts Auto/Manual Ranging (GDM-360)
• Capacitance, Frequency Measurement
• Continuity Beeper/Diode Test