Politici de confidentialitate

Date GDPR Termeni utilizare Politica cookies Confidentialitate Livrare si plata Cum comanzi?
Accept conditiile de utilizare Continua
 
office@distek.ro  +40 760952425   Cere ofertă (0) 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 


GOODWILL INSTEK LCR-900 Series

Cod: GOODWILL INSTEK LCR-900 Series


 
Brosura produs PDF, 5.62 Mb
   

Descriere

The LCR-916/915/914 is a smart, convenient and fully-functional dual display handheld LCR meter. The test frequency extends as high as 100 kHz/10kHz, providing greater flexibility to test a wider range of components.The LCR-916/915/914 uses a dual 20,000 /2,000 count display. The 20,000 count display is used for displaying the primary parameters such as capacitance, inductance and resistance as well as DC resistance measurement, and a 2,000 count display is for secondary parameters such as Q, D, ESR and RP measurement. Secondary measurements can also be combined with the primary measurement while the primary measurement is still being taken.

 

The LCR-916/915/914 provides two measurement methods, 2 wire and 5 wire measurement. The LCR-916/915/914 also come with a host of various standard or optional accessories to assist the testing a number of different component types. The meters also include handy functions such as data hold, tolerance sorting, zero mode and Min/Max (for LCR-916 only).

 

The meter½s USB interface can be used to log data to a PC using the LCR900 software and provide the DC 5V needed to power the meter.

 

With the LCR-916/915/914, you can perform quick and basic LCR measurements with precision at an affordable price.

 

Features:

  • 20,000/2,000 Counts Dual Display
  • Test Frequency : 100/120Hz/1/10/100kHz
  • Auto LCR Mode for DUT Measuring
  • 0.2% Basic Accuracy
  • Measurement Parameter : L,C,R,D,Q,ESR,?,DCR
  • Parallel/Series Testing Mode
  • Sorting Mode for Quality Control
  • 2Wire or 5Wire Measurement Available
  • Data Hold and Zero Mode Supported
  • Max/Min
  • Auto Range, Auto Backlit
  • Low Battery Indication
  • Auto Power off
  • Data Collection/AC power operation
 

Alte produse GW INSTEK

GOODWILL INSTEK GPR-M SERIES

• Constant Voltage and Constant Current Operation
• Internal Select for Continuous or Dynamic Load
• Low Ripple and Noise
• Overload and Reverse Polarity Protection

 
GOODWILL INSTEK PSM-SERIES

• Safety design: OVP,OCP & OTP;Output ON/OFF control
• Self-test and software calibration
• Highly visible vacuum-fluorescent display
• Front and rear output terminal

 
ANALIZOR DE SPECTRU IEFTIN 150KHZ..3GHZ INSTEK GSP-730

• Frequency Range : 150kHz ~ 3GHz
• RBW Range : 30kHz, 100kHz, 300kHz, 1MHz
• ACPR/CHPW/OCBW Measurement
• Presentation Material for Training Courses
• Support Interface : USB Device/Host, RS-232C
• 5.6" TFT LCD with VGA Output

 
GOODWILL INSTEK GVT-427B & GVT-417B

• 300½V Full Scale Sensitivity
• Measurement Frequency: 10Hz ~ 1MHz
• Measurement Amplitude: -70dB ~ +40dB in 12 Ranges
• Dual Channel (GVT-427B)
• CE Approved (GVT-417B)

 
OSCILOSCOP ANALOGIC 2 X 200 MHZ GW INSTEK GOS-6200

• 200MHz Bandwidth, Delayed Sweep
• 2 analog channels
• Built-in 6 Digits Counter
• Cursor Readout with 7 Measurements

 
RLC-METRU DIGITAL PORTABIL TESTARE COMPONENTE 100KHZ GW INSTEK LCR-916

•

GOODWILL INSTEK GPR-U SERIES

• 0.01% High Regulation
• Constant Voltage and Constant Current Operation
• Low Ripple and Noise
• Overload and Reverse Polarity Protection

 
GOODWILL INSTEK AFG-303X SERIES

• Input/output signal ground independent of housing and signal ground between channels also insulated.
• Synchronized phase operates up to 6 units and 12 channels
• Pulse waveform parameters can be set independently for more precise timing
• Harmonic signal generator

 
GOODWILL INSTEK LCR-900 SERIES

• Parallel/Series Testing Mode
• Sorting Mode for Quality Control
• 2Wire or 5Wire Measurement Available
• Data Hold and Zero Mode Supported

 
GOODWILL INSTEK GAD-201G

• Automatic level & distortion measurements
• Auto or Hold function selectable
• 0.1% ~ 100% in 7 distortion measuring ranges
• 20Hz ~ 20kHz in 3 continuous ranges
• 400Hz, 1kHz, 10kHz 3 frequency spots
• 1mVrms ~ 300Vrms in 12 ACV measuring ranges