Dust and water-resistant: IP54 rated for dust and water resistance.
Rugged: 3-meter (9.8-foot) drop tested.
Ergonomically designed: Completely redesigned for a more natural hand fit.
Small and lightweight; clips to your tool belt or belt loop or easily fits into your tool box.

Additional Features

Distance to spot: Precise laser technology makes for more accurate and repeatable measurements.
Dual lasers: The 62 MAX+ has dual rotating lasers to help you identify area to be measured. The measurement area is the spot between the dots.
Large, backlit display: Large screen makes data easier to read, even in dark areas.
Min/Max/Avg/Dif: Displays the minimum, maximum or average temperature, or the difference between two measurements.
Alarm: Hi and Lo alarms for rapid display of measurements outside the limits.
Power: Both the 62 MAX and 62 MAX+ are powered by a single, standard AA battery.

Accesorii standard

Fluke 62 MAX+ Dual laser infrared thermometer, 12:1 spot

Fluke 62 MAX Single laser infrared thermometer, 10:1 spo

Optiuni recomandate

Alte produse FLUKE

CALIBRATOR PORTABIL DE TEMPERATURA FLUKE 724

• -10 to 75 mV, 0 to 10 V Voltage source
• -10 to 75 mV, 0 to 30 V Voltage measure
• 0 to 24 mA Current measure
• 0 to 3200 O Resistance measure / source

ANEMOMETRU MULTIFUNCTIONAL FLUKE 922

• Air Pressure
• Air Velocity
• Air Flow (Volume)
• Temperature

FLUKE TI200 CAMERA INFRAROSU TERMOVIZIUNE 200X150

• Rezolutie detector : 200 X 150 pixeli
• Domeniu masura temepratura: -20 °C si +650 °C
• Precizie : ± 2 °C sau 2%
• Sensibilitate : = 0,075 °C
• Banda spectru : 7,5 µm si 14 µm
• Ecran tactil capacitiv, rezistent, cu înalta rezolutie de 640x480

MULTIMETRU DIGITAL PORTABIL CU DATA LOGGING 4.5 DIGIT FLUKE 289

• 4.5 digit large ¼ VGA display with white backlight
• 50,000 count
• 0.025% basic accuracy
• Logging function with TrendCapture
• Low input impedance function (LoZ)
• Motor winding and low ohm measurement range
• Low pass filter

TETER PORTABIL MONOXID DE CARBON CO FLUKE CO-220

• Rugged case and electronics.
• Large LCD displays CO levels from 0 to 1000 ppm.
• Bright back-light allows easy screen viewing under dim lighting conditions.
• Beeper triggers with increasing frequency as CO levels rise.
• MAX Hold function stores and displays the maximum CO level.
• Automatic sensor zeroing and self-test sequence upon start-up.

ANALIZOR DE VIBRATII FLUKE 810

• On-board identification and location of the most common mechanical faults (bearings, misalignment, unbalance, looseness) focus maintenance efforts on root cause, reducing unplanned downtime
• Fault severity scale with four severity levels helps you prioritize maintenance work
• Repair recommendations advise technicians on corrective action
• On-board context sensitive help provides real-time tips and guidance to new users
• 2 GB expandable on-board memory provides enough space for your machinery’s data

CALIBRATOR MULTIFUNCTIONAL DE PROCES FLUKE 743B

• 0 to 300 V DC/AC Voltage measure
• 0 to 15 V DC Voltage source / simulate
• 0 to 110 mA DC Current measure
• 0 to 22 mA DC Current source / simulate
• 0 to 11 kO Resistance measure / source / simulate
• 1 to 50 kHz Frequency measure / source / simulate
• PC interface and data logging

POMPA PNEUMATICA CALIBRARE PRESIUNE FLUKE 700PTP-1

• Ideal for calibrating pressure transmitters, pressure switches and pressure gauges up to 600 PSI/40 bar
• Pump can be easily cleaned without disassembly
• The vernier can be used as a stand-alone low pressure calibration source
• Two pressure ports allowing simultaneous connection:
• ¼ -NPT female fitting for the reference gauge or pressure module
• ¼" NPT female fitting for the unit under test
• Adjustable stroke length can be set to limit the pressure per stroke

CALIBRATOR DE PRESIUNE FLUKE 718EX

• ATEX II 1G Ex ia IIC T4 Compliant
• Built-in pressure / vacuum hand pump
• Pressure measurement to 0.05%
• Pressure measurement to 200

TERMOMETRU INFRAROSU CU TERMOCUPLU DE CONTACT FLUKE 566/ FLUKE 568

• Measure -40 °C to 800 °C /-40 °F to 1472 °F (568) or -40 °C to 650 °C/-40 °F to 1202 °F (566)
• Easily access advanced features with the soft-key buttons and dot-matrix display
• Measure smaller objects from further away, with a distance-to-spot ratio of 50:1 (568) or 30:1 (566)
• Compatibility with all standard miniconnector Type-K thermocouples allow you to preserve your thermocouple investments