0 to 24 mA Current measure / source / simulate
Best in class 0.2 % accuracy
0.01 mA resolution and sensitivity
Measure 4 to 20 mA signals without "breaking the loop"
Measure mA signals for PLC and control system analog I/O
Measure 4 to 20 mA signals with in-circuit measurement
Simultaneous mA in-circuit measurement with 24V loop power for powering and testing transmitters
Source 4 to 20 mA signals for testing control system I/O or I/Ps
mA output linear ramp or 25% step output
Automatically change the 4 to 20 mA output for remote testing
Dual backlit display with both mA measurement and percent of 4 to 20 mA span
Measurement Spotlight illuminates hard to see wires in dark enclosures
Detachable clamp with extension cable for measurements in tight locations
Measure 10 to 50 mA signals in older control systems using the 99.9 mA range
Automatically change the 4 to 20 mA output for remote testing
Power saving features, auto-off, backlight timeout extend battery life
Hold function captures and displays changing measurements

Accesorii standard

Four AA alkaline batteries (installed)
Soft carrying case
TL75 test leads
AC 72 detachable clip
TL 940 mini hook test leads
Instruction sheet
Hanging tool with hook and loop strap

Alte produse FLUKE

TESTER TENSIUNE SI CONTINUITATE FLUKE T140

• Resistance measurement
• Backlight
• LED Bargraph
• Display: 3½ digit LCD
• Voltage test
• Optical and acoustical continuity test

MULTIMETRU DIGITAL PORTABIL 3.5 DIGIT FLUKE 77IV

• 3.5 digit
• 6000 count resolution
• 0.3% basic accuracy
• Large display
• Backlight for work in dim areas

TERMOMETRU INFRAROSU FARA CONTACT FLUKE 62 MAX

• Dust and water-resistant: IP54 rated for dust and water resistance.
• Rugged: 3-meter (9.8-foot) drop tested.
• Ergonomically designed: Completely redesigned for a more natural hand fit.
• Large, backlit display: Large screen makes data easier to read, even in dark areas.
• Min/Max/Avg/Dif: Displays the minimum, maximum or average temperature, or the difference between two measurements.
• Alarm: Hi and Lo alarms for rapid display of measurements outside the limits

POMPA PNEUMATICA CALIBRARE PRESIUNE FLUKE 700PTP-1

• Ideal for calibrating pressure transmitters, pressure switches and pressure gauges up to 600 PSI/40 bar
• Pump can be easily cleaned without disassembly
• The vernier can be used as a stand-alone low pressure calibration source
• Two pressure ports allowing simultaneous connection:
• ¼ -NPT female fitting for the reference gauge or pressure module
• ¼" NPT female fitting for the unit under test
• Adjustable stroke length can be set to limit the pressure per stroke

FLUKE TIS60 CAMERA DE TERMOVIZIUNE 260X195

• Fluke TiS10 80x60 pixels
• Fluke TiS20 120x90 pixels
• Fluke TiS40 160x120 pixels
• Fluke TiS45 160x120 pixels
• Fluke TiS50 220x165 pixels
• Fluke TiS55 220x165 pixels
• Fluke TiS60 260x195 pixels
• Fluke TiS65 260x195 pixels

FLUKE II905 CAMERA ACUSTICA INSPECTII SI DETECTIE SCURGERI AER COMPRIMAT

• Detectare vizuală ușoară, rapidă și sigură a scurgerilor de gaz comprimat cu modul LeakQ, inclusiv dimensiunea estimată a scurgerii și costul.
• Ecranul tactil LCD de 7" suprapune o hartă sonoră peste imagini vizuale, facilitând identificarea rapidă a locației scurgerii.
• Funcționalitățile integrate de etichetare și adnotare vizuală și textuală oferă detalii importante pentru a optimiza raportarea și acțiunile ulterioare.
• Încărcare wireless în deplasare pe Fluke Connect

ANALIZOR TRIFAZAT CALITATE ENERGIE ELECTRICA FLUKE 434 II

• Energy loss calculator
• Real-time analysis of trends using the cursors and zoom tools
• Highest safety rating in the industry
• Measure all three phases and neutral
• Automatic Trending
• Ten power quality parameters on one screen according to EN50160 power quality standard
• Logger function

MULTIMETRU DIGITAL PORTABIL ELECTRICIAN 3.5 DIGIT FLUKE 117

• 3.5 digit
• 6000 count
• 0.5% accuracy
• VoltAlert™ technology for non-contact voltage detection
• AutoVolt automatic ac/dc voltage selection

POMPA VACUUM GENERARE PRESIUNI JOASE FLUKE 700LTP-1

• hand operated pressure pump
• designed to generate either vacuum to -13 psi / -.90 bar or pressures to 100 psi / 6.9 bar
• Pump can be easily cleaned without disassembly
• Adjustable pressure relief valve with slow-bleed capability. Allows the slow release pressure at a controlled rate
• Quick fit connectors, one for the reference port for connection to a Fluke 700 series pressure module and one to connect to a unit under test
• Slim design, easy to carry and use

CLESTE AMPERMETRIC CURENT TRUE-RMS 400A FLUKE 325

• 400 A ac and dc current measurement
• 600 V ac and dc voltage measurement
• True-rms ac voltage and current for accurate measurements on non-linear signals
• Resistance measurement up to 40 k? with continuity detection
• Temperature and capacitance measurement
• Frequency measurement