RLC-metru 50 Hz..1 MHz Fluke 6306

Cod: Fluke 6306


 

Brosura produs PDF, 0.08 Mb

Descriere

  • 50, 60, 100, 120 Hz  200 Hz to 100 kHz (100 Hz steps)
  • 100 kHz to 1 MHz (1 kHz steps) test frequencies
  • 0.1 % basic accuracy
  • Easy to use, at-a-glance display
  • RS-232 and IEEE-488 interfaces
  • AC test levels from 50 mVrms to 2 Vrms
  • Internal or external bias
  • DC test measurement (optional)
  • 9 front panel set-ups
  • Actual component test voltage/current readback
  • Automatic zero trimming
  • Front-panel test posts for immediate 4-wire measurements
  • Contact check and deviation mode
 

Alte produse FLUKE

MULTIMETRU DIGITAL PORTABIL 3.5 DIGIT FLUKE 179

• 3.5 digit
• 6000 count resolution
• 0.09% basic accuracy
• True RMS voltage and current measurements
• Digital display with analog bargraph and backlight
• Temperature measurements

 

TERMOMETRU INFRAROSU FARA CONTACT FLUKE 572

• Backlit display for poorly lit areas
• Last ten temperature readings displayed on bar graph for easy reference
• Enhanced optics (distance to spot ratio up to 60:1) allow measurements of smaller objects from farther away
• Coaxial three-dot laser sighting system highlights the true diameter of measurement spots at all distances (90% energy)
• MIN/MAX measurements calculations instantly computed
• Audible and visible HI temperature alarm for instant recognition

 

FLUKE TI400 CAMERA INFRAROSU TERMOVIZIUNE 320X240

• Rezolutie detector : 320 X 240 pixeli
• Domeniu masura temepratura: -20 °C si +1200 °C
• Precizie : ± 2 °C sau 2%
• Sensibilitate : = 0,05 °C
• Banda spectru : 7,5 µm si 14 µm
• Ecran tactil capacitiv, rezistent, cu înalta rezolutie de 640x480

 

CALIBRATOR DE PRESIUNE FLUKE 721

• 16 PSI (1.1 bar) or 36 psi (2.48 bar) low pressure sensor
• 7 high pressure ranges including 100, 300, 500, 1000, 1500, 3000 or 5000 psi (6.9, 20, 24.5, 69, 103.4, 200, 345 bar)
• Ideal for gas flow calibration (custody transfer) applications
• Two isolated, stainless steel, pressure sensors with 0.025 % accuracy
• Pt100 RTD input for temperature measurement, (probe optional)
• Measures 4 to 20 mA signals
• Internal 24 V loop power supply can power a transmitter under test
• Measure up to 30 V dc, check 24 V loop power supplies

 

CALIBRATOR MULTIFUNCTIONAL DE PROCES FLUKE 753

• Measure volts, mA, RTDs, thermocouples, frequency
• ohms to test sensors, transmitters and other instruments
• Source/simulate volts, mA, thermocouples, RTDs, frequency, ohms, and pressure
• Power transmitters during test using loop supply with simultaneous mA measurement

 

ANALIZOR DE VIBRATII FLUKE 810

• On-board identification and location of the most common mechanical faults (bearings, misalignment, unbalance, looseness) focus maintenance efforts on root cause, reducing unplanned downtime
• Fault severity scale with four severity levels helps you prioritize maintenance work
• Repair recommendations advise technicians on corrective action
• On-board context sensitive help provides real-time tips and guidance to new users
• 2 GB expandable on-board memory provides enough space for your machinery’s data

 

TELEMETRU LASER PORTABIL 80M FLUKE 419D

• Instantly measures up to 80m (260 ft) with accuracy of +/- 1mm
• 3-line display plus storage for 20 complete displays
• Tripod mountable

 

MULTIMETRU DIGITAL PORTABIL 4.5 DIGIT FLUKE 87V

• 4.5 digit
• 20,000 count resolution for precise measurements
• 0.05% basic accuracy
• True-rms ac voltage and current for accurate measurements on non linear signals
• Selectable filter for accurate voltage and frequency measurements on motor drives
• Built in thermometer lets you carry one less tool (TC probe included)

 

INREGISTRATOR MONITORIZARE PUTERE TRIFAZATA FLUKE 1735

• Record power and associated parameters for up to 45 days
• Measure harmonic distortion caused by electronic loads
• Voltage event capture
• View graphs and generate reports

 

FLUKE ESA712 TESTER ELECTRO-SECURITATE ECHIPAMENTE MEDICALE

• Ecran tactil de 5” cu interfață intuitivă pentru utilizator
• Design mic, portabil, ergonomic, cu mâner integrat
• Zece suporturi pentru piese aplicate cu ghidare inovatoare cu iluminare LED (ECG și banană)
• Rezistență de izolație de la 50V, 100V, 250V și 500V