400 Hz measurement: By increasing the power frequency to 400 Hz, transformers and motors can be much smaller and lighter than at 50 or 60 Hz, which is an advantage in aircrafts, submarines, space crafts, and other military equipment and hand-held tools. The 437 II model captures power quality measurements for these types of avionic and military systems.
Power inverter efficiency: Simultaneously measure AC output power and DC input power for power electronics systems using optional DC clamp.
PowerWave data capture: Capture fast RMS data, show half-cycle and waveforms to characterize electrical system dynamics (generator start-ups, UPS switching etc.).
Energy loss calculator: Classic active and reactive power measurements, unbalance and harmonic power, are quantified to pinpoint the fiscal costs of energy losses.
Troubleshoot real-time: Analyze the trends using the cursors and zoom tools.
Highest safety rating in the industry: 600 V CAT IV/1000 V CAT III rated for use at the service entrance.
Measure all three phases and neutral: With included four flexible current probes with enhanced thin flex design to fit into the tightest places.
Automatic Trending: Every measurement is always automatically recorded, without any set-up.
System-Monitor: Ten power quality parameters on one screen according to EN50160 power quality standard.
Logger function: Configure for any test condition with memory for up to 600 parameters at user defined intervals.
View graphs and generate reports: With included analysis software.
Battery life: Seven hours operating time per charge on Li-ion battery pack.

Accesorii standard

BC430 Power Adapter
International plug adapter set
BP290 (Single capacity Li-ion battery) 28 Wh (7 hours or more)
TLS430 Test lead and Alligator clip set
WC100 color coding clips and regional decals
i430flex-TF, 24 inch (61 cm) length, 4 clamps
8 GB SD card
PowerLog on CD (includes operator manuals in PDF format)
USB cable A-Bmini

Optiuni recomandate

Clips
AC285	AC285 SureGrip™ Alligator Clip Set

Batteries, Chargers and Adapters
BP290	2400 mAh Li-ion battery for Fluke 190-series II
BP291	4800 mAh High capacity Li-ion battery ) for Fluke 190-seriesII
BC430	BC430 Line Voltage Adapter/Battery Charger
EBC290	EBC290 External Battery Charger, charges BP291 while outside instrument

Cables and Hardware
GPS430	GPS430 Time Synchronization Module

Current clamps
90i-610s	90i-610s AC/DC Current Probe (600 A)
i30s	Fluke i30s AC/DC Current Clamp
i1000s	i1000s AC Current Clamp (1000 A)
i200s	i200s AC Current Clamp
i3000s	i3000s AC Current Clamp
i400s	i400s AC Current Clamp
i5sPQ3	i5sPQ3 AC Current Clamp, 3-pack

Options
HH290	Hanging Hook for ScopeMeter 190-Series II

Test Leads
TLS430	TLS430 Test Leads and Alligator Clips set
WC100	WC100 Color Localization Set

Alte produse FLUKE

MULTIMETRU DIGITAL DE LABORATOR 6.5 DIGIT FLUKE 8845A

• 6.5 digit resolution
• Basic Vdc accuracy 0.0035 %
• Dual display
• 100 µA to 10 A current range, with up to 100 pA resolution

CALIBRATOR TERMOCUPLE FLUKE 714B

• measure and simulate (17) different thermocouple types and millivolts
• Measure 4 to 20 mA signals while simultaneously sourcing a temperature signal
• Configurable 0 % and 100 % source settings for quick 25 % linearity checks
• Linear ramp and 25 % step auto ramp based on 0 % and 100 % settings
• Dual inputs and backlit display for easy interpretation of measurements
• Power down settings remembered at power up for easy restart of tests
• 1-year and 2-year specifications and traceable certification of calibration

CALIBRATOR PORTABIL VOLT/MA FLUKE 715

• 0 to 200 mV, 0 to 20 V Voltage measure
• 0 to 100mV, 0 to 10 V Voltage source / simulate
• 0 to 24 mA Current measure
• 0 to 20 mA Current source / simulate
• very high accuracy of 0.015% and 1 mA resolution

MULTIMETRU DIGITAL DE LABORATOR 5.5 DIGIT FLUKE 8808A

• 5.5 digit resolution
• Basic V dc accuracy of 0.015 %
• Dual display

CALIBRATOR DE PRESIUNE FLUKE 719

• Best in class pressure measurement uncertainty of 0.025%
• Measure and source mA with best in class 0.015% accuracy
• 30 PSI and 100 PSI pressure ranges

DETECTOR PREZENTA TENSIUNE FLUKE LVD2 VOLT LIGHT

• Dual Sensitivity
• LED light with 100,000 hour life
• Detects from 90 to 600 V AC
• Rated to CAT IV 600 V

CALIBRATOR MULTIFUNCTIONAL APARATE DE MASURA FLUKE 5522A

• Handheld and bench meters (analog and digital) up to 6 ½ digits
• Current clamps and clamp meters, Thermocouples and RTDs
• Process calibrators, Data loggers
• Strip and chart recorders, Watt meters
• Power harmonics analyzers, Panel meters
• Graphical multimeters, Power quality analyzers (with option)

POMPA HIDRAULICA CALIBRARE PRESIUNI FLUKE 700HTP-2

• hand operated hydraulic pressure pump
• designed to generate calibration pressures up to 10,000 psi/690 bar
• Variable size stroke adjustment, allows the user to vary the volume and pressure per stroke
• Integral pressure adjustment vernier knob for fine pressure adjustment
• Directly connection to pressure modules consolidates two separate pieces into one when performing pressure calibration and testing
• Two ¼ inch NPT pressure ports, one for reference (pressure module or gauge), one for UUT
• Improved priming
• Improved stroke limiting mechanism

CALIBRATOR DE PRESIUNE FLUKE 718

• Pressure Source and Milliamp Measurement
• Best in class mA accuracy of 0.015 %
• 1, 30, 100 & 300 PSI ranges available

MULTIMETRU DIGITAL PORTABIL 3.5 DIGIT FLUKE 175

• 3.5 digit
• 6000 count resolution
• 0.15% basic accuracy
• True RMS voltage and current measurements