Take pinless (non-invasive) Moisture measurements on wood and building materials without damaging the surface with the depth of approx <4" (100mm) with Extech’s MO57 Moisture Meter. The ball moisture sensor provides smooth gliding on hard or delicate surfaces. Easy-to-operate with display icons that indicate the levels of moisture content plus audible alert feature. Ideal for building restoration projects and applications where moisture detection on floors, tiles and under carpets is critical. A musthave tool for analyzing the after-effects of water leakage behind walls and in ceilings and also measuring moisture content on a non-flat surface.

Features:

Pinless moisture measurement depth to <4" (100mm)
Measures Moisture up to 99.9% for Wood and other building materials
Displays moisture level in wood and building materials such as wall board, sheet rock, tiles, cardboard, plaster, concrete, and mortar
Audible Alert - Tone rate beeps faster as the moisture level increases
Icons display low, medium and high levels of moisture content
Easy-to-use, compact-sized design
Data Hold freezes reading on display
Built-in battery level check and measurement verification test
Auto Power Off conserves battery power
Complete with 9V battery and wrist strap

Alte produse EXTECH

EXTECH BT100: BATTERY CAPACITY TESTER

• Rezistenta: 40 ohm, precizie: ±1%
• Tensiune: 40V, precizie: ±0,1%
• Mod de lucru: mentinere
• Alte functii: inchidere automata, alarme, ZERO
• Memorie: 500 seturi
• Interfete: RS232
• Accesorii incluse: sonde de masura, cablu RS-232, software, clesti crocodil, geanta de transport
• Alimentare: 6 baterii 1.5 Vcc (AA)
• Dimensiuni: 250 x 100 x 45 mm
• Greutate: 500g

EXTECH LRK10 KIT APARATE INSTALATII LUMINOASE

• Designed for professionals who routinely audit existing and replacement lighting systems for energy efficiency and lighting performance
• Kit includes:
• LT300 - Light meter with digital and analog display of light in Foot-candles or Lux
• DT200 - Compact laser distance meter with area/volume calculation functions
• Supplied in a soft carrying case that provides protection and organization for the meters whenever they are needed

EXTECH MA410 CLESTE CURENT 400A AC + DETECTOR FARA CONTACT

• AC Current, AC/DC Voltage, Resistance, Frequency, Capacitance, Temperature, Duty Cycle, Diode and Continuity
• Integrated Non-Contact Voltage Detector with LED alert
• Compact size allows measurments in tight locations
• 1.2" (30mm) jaw size for conductors up to 350MCM
• Relative Mode for Capacitance Zero and Offset Adjustment

EXTECH RHT35 DATALOGGER USB UMIDITATE TEMPERATURA PRESIUNE BAROMETRICA

• Compact size housing with built-in NTC thermistor, capacitive humidity sensor, and barometric pressure MEMS sensor designed with standard USB connector for easy data downloading to a PC
• 5-digit LCD display with battery life indicator
• User programmable settings: 6 languages, sample rate, start delay time, alarm delay time, high/low alarm range, and security feature
• Status Indication via Red and Green LEDs
• Start button begins continuous datalogging, which continues until memory is full at 48,000 readings (16K for each parameter), or when Stop button is pressed
• Bookmark 8 locations in a data recording log with a press of the Mark button

EXTECH 96VFL11 1/4 DIN CONTROLER TEMEPRATURA PID CU 2 IESIRI DE RELEE

• Two relay outputs
• Dual 4-digit LED displays of process and setpoint values
• User friendly menus and tactile keypad for easy programming
• One-touch autotuning for quick setup & precise control

EXTECH 412400: MULTIFUNCTION PROCESS CALIBRATOR

• Source 0 to 24mA with 0.01mA resolution
• Measure 0 to 50mA (0.1mA resolution)
• Select Type K, J, or T thermocouple for precision calibrations in °F/°C or mV
• Output 0 to 1999mV or 0 to 10.00V
• Measure 0 to 19.99V

EXTECH SDL400 LUXMETRU CU INREGISTRARE DATALOGGING

• Wide range to 10,000Fc or 100kLux
• Cosine and color-corrected measurements
• Utilizes precision silicon photo diode and spectral response filter
• Offset adjustment used for zero function to make relative measurements
• Adjustable data sampling rate

EXTECH RH520A-220 INREGISTRATOR GRAFIC TEMPERATURA SI UMIDITATE

• Simultaneous numerical and graphical display of Humidity and Temperature readings, plus Time and Date
• Measures Humidity (10 to 95%RH) and Temperature (-20.0°F to 140.0°F) plus calculates Dew Point
• Basic accuracy 3%RH, 1.8°F/1°C
• Large dual graphical LCD displays with adjustable vertical and horizontal TAC resolution
• Internal memory records up to 49,000 data points and can be transferred to a PC via RS-232 serial port for further data analysis
• LCD indicates percentage of memory remaining
• Comes with 220V AC power supply

EXTECH PRC15: CURRENT AND VOLTAGE CALIBRATOR/METER

• Sursa de semnal: iesire in curent 0-24mA (max 1000ohm)
• Masurare curent: 0-50mA
• Sursa de semnal: iesire tensiune 0-20V
• Masurare tensiune: 0-19.99V

EXTECH CO50: DESKTOP CO (CARBON MONOXIDE) MONITOR

• Simultaneously displays Carbon Monoxide (CO) concentration, Air Temperature, and Relative Humidity readings with date (Year, Month, Day) and time
• Visibly bright LED indicates active monitoring (green) or surpassed CO alarm threshold (red)
• Extra loud audible beeper alarm level meets UL 2013 Standard (>85dB @ 3 meters); default alarm threshold at 30ppm (user adjustable)
• Designed with Electrochemical CO sensor
• Record/Recall Max reading for CO concentration
• CO calibration function in fresh air