The DL160 is a Dual Input True RMS AC Voltage/Current Data logger. Simultaneously data log 2 channels of up to 256,000 readings of TRMS AC Voltage (600V) or Current (200A) or one AC Voltage and one AC Current input with a user programmable sample rate from 1 second to 24 hours. LCD displays time/date, current reading, and min/max. Readings can be downloaded to your PC via the USB interface. Featuring Normal, Peak, and Capture (user specified trigger level) recording modes. Complete with 2 current clamps, two sets of test leads, 2 sets of alligator clips, software, USB cable, Universal AC Adapter, and 4 x AAA and 2 x CR2032 Batteries.

Features:

Simultaneously measure two AC Voltage inputs or two AC Current inputs or one AC Voltage and one AC Current input
Readings can be downloaded to your PC via the USB interface and analyzed using the included software or exported to a spreadsheet
LCD indicates time/date, current readings and Min/Max
Auto Power off and battery check
Complete with 2 Current and Voltage sensor modules, two sets of test leads and alligator clips, USB cable, Windows® software, AC Adaptor and four AAA batteries

Alte produse EXTECH

EXTECH 38073A MINI-MULTIMETRU ANALOGIC

• Easy to read color coded analog display
• Measure AC/DC Voltage, DC Current, Resistance and Decibel
• 4% full scale basic accuracy
• Battery test on 9V and 1.5V batteries
• Complete with test leads and 1.5V AA battery

EXTECH MN30 MULTIMETRU TRUE RMS AUTOSENSING™ + NCV

• True RMS for accurate readings of noisy, distorted or non-sinusoidal waveforms
• Unique smart AutoSensing feature
• Built-in Non-Contact Voltage (NCV) detector
• Convenient built-in LED Flashlight
• Audible Continuity tester

EXTECH PRC15: CURRENT AND VOLTAGE CALIBRATOR/METER

• Sursa de semnal: iesire in curent 0-24mA (max 1000ohm)
• Masurare curent: 0-50mA
• Sursa de semnal: iesire tensiune 0-20V
• Masurare tensiune: 0-19.99V

EXTECH 407026 LUXMETRU SOLID CU INTERFATA PC

• Simultaneous display of Foot Candles or Lux and lighting type
• Large 1.4" (1999 count) LCD display
• % displays differential from reference point
• "ZERO" Re-Calibration
• Utilizes precision photo diode and color correction filter
• Cosine and color corrected measurements

EXTECH EX810 CELSTE AMPERMETRIC 1000A AC CLAMP METER CU TERMOMETRU INFRAROSU

• Non-contact InfraRed Temperature measurements with laser pointer
• Peak hold captures inrush currents and Transients
• MultiMeter functions include AC/DC Voltage, AC Current, Resistance, Capacitance, Frequency, Diode, and Continuity
• 1.7" (43mm) jaw opening for conductors up to 750MCM or two 500MCM
• 4000 count backlit display
• Autoranging with manual range button

EXTECH HD780 MANOMETRU DIGITAL DIGITAL

• Dual differential inputs for pressure and temperature
• Displays 5 types of pressure units
• For use with R22 and R410A refrigerants
• Standard 1/4 NPT male flare fittings

EXTECH MO280 TESTER UMIDITATE NE-INVAZIV FARA AC

• Non-invasive measurement to monitor moisture in wood and other building materials
• Select from 10 wood types and measurement ranges
• Measurement depth to 0.75" (20mm) below the surface
• LCD displays % moisture of wood or material being tested

EXTECH 38387 CLESTE AMPERMETRIC 600A AC CU MULTIMETRU

• Measure AC Current, AC/DC Voltage and Resistance
• 1.25" (33mm) circular jaw opening for large cables (350MCM)
• Large 2000 count LCD display
• Data Hold freezes data in display
• Peak Hold captures in-rush currents
• Audible Continuity beeper

EXTECH CO30: CO (CARBON MONOXIDE) MONITOR

• Alternately displays Carbon Monoxide (CO) concentration, Air Temperature, and Relative Humidity readings (cycles approximately every 6 seconds)
• Visible bright tri-colored (green, yellow, red) LED alarm indicator
• Adjustable audible alarm for readings exceeding one of the selected ranges: 25ppm, 30ppm, 35ppm, 50ppm, 100ppm or 200ppm
• ZERO Re-Calibration function
• Manual Temperature and Relative Humidity Compensation (adjustable)
• CO Calibration function in fresh air

EXTECH 380193 RLC-METRU PORTABIL COMPONENTE PASIVE

• Simultaneous 20,000/10,000 count display of the primary parameter (L, C or R)
• Secondary parameter of Q (quality), D (dissipation) or R (resistance)
• Set Hi/Lo limits using absolute values or percentage limits
• Parallel or Series equivalent circuit
• Automatic blown fuse indication
• Built-in test fixture or use external test leads