Extech 480400 Tester secventa faze

Cod: Extech 480400


 

Brosura produs PDF, 0.14 Mb

Descriere

Displays graphical phase orientation

The 480400 Phase Sequence Tester has a 40 to 600-Volt rated range for testing phase orientation of 3-phase power sources over a 15 to 400Hz frequency range. Multiline graphical LCD indicates phase orientation (clockwise or counter-clockwise) and whether each of the phases is live. No battery required. Comes complete with cable, three large color coded alligator clips, and pouch case.

 

Features:

  • Checks phase sequence and phase status
  • Tests up to 600VAC and displays graphical phase orientation on the large LCD
  • Double molded durable housing
  • Easy to use alligator clips with wide jaws
 

Alte produse EXTECH

EXTECH PRT200 TESTER SECVENTA FAZA FARA CONTACT

• 75 to 1000VAC input voltage with 45 to 65Hz frequency range
• LEDs indicate phase orientation (clockwise or counter-clockwise) and whether each phase is live
• Beeper sounds intermittently when correct phase is detected and continuously if phase is reversed
• Durable housing with back cover magnet for attachment to an AC distribution panel for easy measurement

 

CAMERA VIDEO WIRELESS INSPECTII EXTECH BR200

• BR200: Video Borescope/Wireless Inspection Camera
• 17mm camera diameter and 3.5" Color TFT LCD Wireless Monitor
• Memory card for capturing images (JPEG) or video (AVI) for viewing on your PC
• Detachable wireless 3.5" color TFT LCD display
• Captured videos and images can be viewed on the wireless monitor or transferred to your PC via the microSD card or USB cable

 

DINAMOMETRU MASURARE FORTA CU DATALOGGING EXTECH 475040-SD

• Features 5000g, 176 oz. and 49 Newtons measurement capacity
• Large dual backlit LCD with reversible display feature to match viewing angle
• Record data on SD card
• Updates reading every 0.2 seconds and sample rate is 1 second to 9 hours
• Integrated load cell measurement transducer

 

EXTECH 380820 SURSA UNIVERSALA AC SI ANALIZOR PUTERE

• 99 memory locations for preset voltage and frequency output settings
• User-programmable Over Current Protection
• Programmable through the built-in RS-232 interface
• Data acquisition mode captures readings to your PC with a user-programmable sampling rate of 2 to 65,535 seconds
• Complete with AC power cord, RS-232 to USB cable and software

 

EXTECH HD780 MANOMETRU DIGITAL DIGITAL

• Dual differential inputs for pressure and temperature
• Displays 5 types of pressure units
• For use with R22 and R410A refrigerants
• Standard 1/4 NPT male flare fittings

 

EXTECH EA80 EASYVIEW™ TESTER CALITATE AER INTERIOR CU DATALOGGING

• Checks for Carbon Dioxide (CO2) concentrations
• Maintenance free dual wavelength NDIR (non-dispersive infrared) CO2
• CO2 measurement range: 0 to 6,000ppm
• Temperature measurement range: -4 to 140°F (-20 to 60°C)
• Humidity measurement range: 10 to 95%RH

 

EXTECH MA410 CLESTE CURENT 400A AC + DETECTOR FARA CONTACT

• AC Current, AC/DC Voltage, Resistance, Frequency, Capacitance, Temperature, Duty Cycle, Diode and Continuity
• Integrated Non-Contact Voltage Detector with LED alert
• Compact size allows measurments in tight locations
• 1.2" (30mm) jaw size for conductors up to 350MCM
• Relative Mode for Capacitance Zero and Offset Adjustment

 

EXTECH EX230 MINI-MULTIMETRU DIGITAL CU 12 FUNCTII SI TEMPERATURA INFRAROSU

• Built-in IR Thermometer with laser pointer for locating hot spots (6:1 Distance to Target Ratio)
• AC/DC Voltage, AC/DC Current, Resistance, Capacitance, Frequency, Temperature (Type K + IR), Duty Cycle, Continuity / Diode
• 4000 count large backlit dual LCD with easy-to read digits
• Low current capability measure down to 0.1µA

 

EXTECH MG500 MEGOHMMETRU 10KV

• High test voltages up to 10kV with Insulation Resistance to 500GOhm
• Polarization Index (PI) measurement
• Dielectric Absorption Ratio (DAR) measurement
• EnerSave™ limits test duration to 10 seconds to save energy
• Complete with built-in heavy duty carrying case with cover, test leads, alligator clips, and 8 x C batteries

 

EXTECH BT100: BATTERY CAPACITY TESTER

• Rezistenta: 40 ohm, precizie: ±1%
• Tensiune: 40V, precizie: ±0,1%
• Mod de lucru: mentinere
• Alte functii: inchidere automata, alarme, ZERO
• Memorie: 500 seturi
• Interfete: RS232
• Accesorii incluse: sonde de masura, cablu RS-232, software, clesti crocodil, geanta de transport
• Alimentare: 6 baterii 1.5 Vcc (AA)
• Dimensiuni: 250 x 100 x 45 mm
• Greutate: 500g