This 480846 RF EMF Strength Meter monitors high frequency radiation in the 10MHz to 8GHz range. Ideal for mobile phones, cell phones, base stations, locating RF hotspots, wireless network (Wi-Fi) RF detection, RF "Electrosmog" detection, microwave leakage, and wireless communication applications (CW, TDMA, GSM, DECT). Meter features non-directional measurement with 3-channel (triaxial) measurement probe, Max Hold and Average functions, and manual store/recall of up to 99 data sets. In addition, there is an audible alarm with a user-selectable threshold. The meter comes complete with a 9V battery and carrying case.

� For electromagnetic field strength measurement including:

o Mobile phone base station antenna radiation

o RF power measurement for transmitters

o Wireless LAN (Wi-Fi) detection/installation

o Wireless communication applications (CW TDMA GSM DECT)

o Microwave leakage

Alte produse EXTECH

EXTECH EX430 MULTIMETRU PROFESIONAL CU 1 FUNCTII

• True RMS DMM with 11 functions and 0.3% basic accuracy
• AC/DC Voltage & Current, Resistance, Capacitance, Frequency, Temperature, Diode/Continuity, Duty Cycle
• Input fuse protection and mis-connection warning
• 20A max Current

EXTECH EX503 MULTIMETRU INDISTRIAL ROBUS SOLID CU 10 FUNCTII

• Averaging DMM with 10 functions and 0.5% basic accuracy
• AC/DC Voltage & Current, Resistance, Capacitance, Frequency, Duty Cycle, Diode/Continuity
• Dual sensitivity frequency functions (electrical/electronic)
• 1000V input protection on all functions
• 10A max Current

EXTECH MO220 UMIDIMETRU UMIDITATE LEMN

• Monitor moisture in wood and other building materials
• Measure directly with the built-in moisture pins or use remote hand-press probe on hard surfaces
• Memory contains 8 wood groups with calibrations for approximately 170 species of wood
• Designed in a rugged double molded housing construction and is pocket sized for one-handed operation

EXTECH 407736 SONOMETRU CU 2 SCALE

• Provides 1.5dB accuracy
• Meets ANSI and IEC 651 Type 2 standards
• Two measuring ranges: 35 to 90dB (Low) and 75 to 130dB (High)
• Max Hold with reset button
• Built-in calibration check (94dB)

EXTECH HD780 MANOMETRU DIGITAL DIGITAL

• Dual differential inputs for pressure and temperature
• Displays 5 types of pressure units
• For use with R22 and R410A refrigerants
• Standard 1/4 NPT male flare fittings

EXTECH HD700 MANOMETRU DIGITAL PRESIUNE DIFERENTIALA(2PSI)

• ±2psi range, 11 Selectable units of measure
• Max/Min/Avg recording and Relative time stamp
• Data Hold, Auto power off and Zero function
• Large LCD display with backlighting

EXTECH 382260 SURSA IN COMUTATIE 80W

• Performs like 3 power supplies in one
• 3 selectable ranges: 0 to 16V/0 to 5A; 0 to 27V/0 to 3A; 0 to 36V/0 to 2.2A
• 4-Digit LED displays
• Front/Rear output terminals

EXTECH MP530A MULTIPRO® MULTIMETRU PERFORMANT

• High basic DC Voltage accuracy of 0.08%
• Wide AC Voltage bandwidth of 40Hz to 20kHz
• Rugged design with protective holster and water resistant housing
• Backlit 5000 count LCD display for high resolution (0.01mV, 0.1µA, 0.01Ohm, 0.01nF, 0.001Hz)

EXTECH CO10: CARBON MONOXIDE (CO) METER

• Easy to read 1999 count backlit displays CO levels from 0 to 1000ppm
• 1ppm resolution with ±5% or ±10ppm basic accuracy (whichever is greater)
• Utilizes a stabilized electrochemical gas specific (CO) fast response sensor
• Audible alarm starts at 35ppm
• Backlight for low light conditions

EXTECH EX350 MULTIMETRU TRUE RMS CU 11 FUNCTII

• True RMS for accurate AC measurements
• 4000 count backlit LCD display
• Low Impedance (LoZ) prevents false reading caused by ghost voltages
• Low Pass Filter (LPF) for accurate measurements of variable frequency drive signals