Extech 380803 Analizor putere cu Datalogger

Cod: Extech 380803


 

Brosura produs PDF, 0.23 Mb

Descriere

Compact, battery operated datalogging appliance tester for analyzing AC/DC power loads

The 380803 is a True RMS power analyzer and data logger. Appliance Tester/Power Analyzer simultaneously displays the Wattage, Power Factor or VA, Voltage or frequency (Hz), and Current (Amps) of the device or appliance tested. The built-in data logger can store up to 1,012 readings or you can save data directly to your PC using the built-in RS-232 port and included software. Additional features include: Max Hold, Data Hold, and overload protection. Battery or AC Adaptor Operation provides line isolation. Comes complete with 8 AA batteries, software, cable, power cord, AC Adaptor, and case.

 

Features:

  • Built-in Datalogger stores up to 1,012 readings (single record/continuous datalogging)
  • Four simultaneous displays of Watts, Power Factor or VA, Voltage or Hz, Amps
  • True RMS Voltage & Current measurements of sine, square, triangular and distorted wave forms with a crest factor < 5
  • Plug device to be tested directly into the Power Analyzer
  • Max, Data Hold and Overload Protection
  • Battery or AC adaptor provides line isolation
  • Sampling (update) rate is 2.5 times/second
  • Software included to download and store data to a PC
  • Includes 117V AC adaptor for use in locations where 110-117V AC service is available. For areas where 220V is in use, a 220V AC adaptor (not included) is required or can be operated by batteries only.

 

 

Alte produse EXTECH

EXTECH DM220 MINI-MULTIMETRU CU DETECTOR DE TENSIUNE FARA CONTACT

• Large high contrast 4000 count LCD display
• Non-Contact Voltage detection identifies live circuits
• Built-in Flashlight
• Measures AC/DC Voltage, AC/DC Current and Resistance, Frequency and Duty Cycle
• Diode Test and Continuity Beeper

 

EXTECH EA80 EASYVIEW™ TESTER CALITATE AER INTERIOR CU DATALOGGING

• Checks for Carbon Dioxide (CO2) concentrations
• Maintenance free dual wavelength NDIR (non-dispersive infrared) CO2
• CO2 measurement range: 0 to 6,000ppm
• Temperature measurement range: -4 to 140°F (-20 to 60°C)
• Humidity measurement range: 10 to 95%RH

 

EXTECH LT300 LUXMETRU

• Wide range to 40,000Fc or 400,000 Lux with max resolution to 0.01 Fc/Lux
• Relative mode indicates change in light levels, peak mode captures highest reading
• Remote light sensor on 12" (30.5cm) coiled cable - expandable to 24" (61cm)
• Utilizes precision photo diode and color correction filter
• Large LCD display with analog bargraph
• Backlight for readings in low light levels
• Complete with 9V battery, light sensor with protective cover, protective holster, and soft case

 

EXTECH RHT50 DATALOGGER DE UMIDITATE-TEMPERATURA-PRESIUNE

• Datalogs up to 10,000 readings with a user programmable sample rate
• USB interface for easy set-up and data download
• Selectable Atmospheric Pressure Units: psi, hPa, kPa, and bar
• Selectable data sampling rate from 1 minute to 18 hours

 

EXTECH ET38 TESTER TENSIUNE SI CONTINUATATE

• Voltage detection range: 12 to 300V AC
• Continuity tester
• LED light indicator
• Includes built-in screwdriver tip, pocket clip, and two button batteries

 

EXTECH HD780 MANOMETRU DIGITAL DIGITAL

• Dual differential inputs for pressure and temperature
• Displays 5 types of pressure units
• For use with R22 and R410A refrigerants
• Standard 1/4 NPT male flare fittings

 

EXTECH 407910 TESTER PRESIUNE DIFERENTIALA MANOMETRU

• ±29psi with 0.02psi resolution
• 8 selectable units of measure
• Zero function for offset measurements
• Data Hold, Auto power off, and Min/Max functions

 

EXTECH LT40 LUXMETRU

• Measure white LED and Standard Lighting in Lux or Foot-Candle (Fc) units
• Built-in sensor with protective cover
• 4000 count LCD display
• Cosine and color corrected measurements
• Min/Max Average and Auto Power Off
• Complete with 2 AAA batteries, and pouch

 

EXTECH MN30 MULTIMETRU TRUE RMS AUTOSENSING™ + NCV

• True RMS for accurate readings of noisy, distorted or non-sinusoidal waveforms
• Unique smart AutoSensing feature
• Built-in Non-Contact Voltage (NCV) detector
• Convenient built-in LED Flashlight
• Audible Continuity tester

 

EXTECH PD20 TERMO-PEDOMETRU

• Total Step mode displays the total accumulated steps user walked after 7-day storage
• Auto power saving mode when meter detects no movement for 10 minutes
• Includes case with built-in clip to wear on your clothes and designed with lanyard insert hole (lanyard not included) to wear around your neck
• Complete with CR2032 battery and nylon case with window opening for display viewing and belt-clip